MATERIAL SAFETY DATA SHEET
Sikacrete 211
HMIS
HEALTH *2
FLAMMABILITY 0
REACTIVITY 0
E
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 03/30/2005
Product Name: Sikacrete 211
CAS Number: Not Established
Chemical Family: Cementitious mortar
MSDS Number: 3547
Product Code: 0557501
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
CEMENT, PORTLAND 65997-15-1
SILICA, QUARTZ 14808-60-7
3. Hazards Identification
Eye Hazards
Causes eye irritation.
Skin Hazards
May cause skin irritation. Prolonged and/or repeated skin contact may cause an allergic reaction/sensitization.
Product becomes alkaline when exposed to moisture. May cause a reversible inflammatory effect on skin or
tissue at the site of contact.
Ingestion Hazards
May be harmful if swallowed.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sikacrete 211
3. Hazards Identification - Continued
Inhalation Hazards
Breathing dust may cause nose, throat or lung irritation. Respirable crystalline silica can cause silicosis, a fibrosis
(scarring) of the lungs. Silicosis may be progressive.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. If victim is fully conscious,
give one or two cups of water or milk to drink. Seek medical attention immediately.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration, seek medical attention.
5. Fire Fighting Measures
Flash Point: N/A 掳F
Lower Explosive Limit: N/AV
Upper Explosive Limit: N/AV
Fire And Explosion Hazards
None known
Extinguishing Media
Use the appropriate extinguishing media for the surrounding fire.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Using appropriate personal protective equipment (PPE), shovel material into waste
containers taking care to minimize dust. Dampen if necessary to control dust. Vacuum clean dust with equipment fitted
with High Efficiency Particulate Air (HEPA) filters.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Keep containers tightly closed.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use of a system of local and/or general exhaust is recommended to keep employee below applicable exposure
limits. Refer to the current edition of "Industrial Ventilation: A Manual of Recommended Practice" published by
the American Conference of Governmental Industrial Hygienists for information on the design, installation, use,
and maintenance of exhaust systems.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sikacrete 211
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Safety glasses with side shields or goggles.
Skin Protection
Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long pants). Launder before
reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Exposure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Ingredient(s) - Exposure Limits
CEMENT, PORTLAND
ACGIH TLV-TWA - 10 mg/m3
OSHA PEL -TWA - 15 mg/m3 (total dust)
OSHA PEL - TWA - 5 mg/m3 (respirable dust)
SILICA, QUARTZ
ACGIH TLV-TWA 0.05 mg/m3
OSHA PEL-TWA 30/%SiO2+2 mg/m3
OSHA PEL-TWA 10/%SiO2+2 mg/m3
OSHA PEL-TWA 250/%SiO+5 mppcf
NUISANCE DUST
ACGIH TLV-TWA: 10 mg/m3 Total Dust
ACGIH TLV-TWA: 5 mg/m3 Respirable Dust
OSHA PEL-TWA: 15 mg/m3 Total Dust
OSHA PEL-TWA: 5 mg/m3 Respirable Fraction
9. Physical And Chemical Properties
Appearance
Gray to Gray-Brown Powder
Odor
Odorless
Chemical Type: Mixture
Physical State: Solid
Specific Gravity: N/AV
Percent VOCs: 0%
Packing Density: N/AV
Vapor Density: > Air
Solubility: Slight
Evaporation Rate: N/AV
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
Contact of silica with powerful oxidizing agents such as fluorine, chlorine, trifluoride, manganese trixoide, oxygen
difluoride, may cause fires. Upon direct contact with water, material will harden.
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sikacrete 211
10. Stability And Reactivity - Continued
Incompatible Materials
None Known
Hazardous Decomposition Products
Silica will dissolve in hydroflouric acid and produce a corrosive gas - silicon tetraflouride.
Conditions To Avoid (Polymerization)
Will not occur
11. Toxicological Information
Ingredient(s) - Carginogenicity
SILICA, QUARTZ
NTP - Listed On The National Toxicology Program
Listed In The IARC Monographs
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not regulated by the USDOT.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
State Regulations
WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or
other reproductive harm.
Ingredient(s) - State Regulations
SILICA, QUARTZ
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
California - Proposition 65
Massachusetts - Hazardous Substance
16. Other Information
No Data Available...
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sikacrete 211
16. Other Information - Continued
HMIS Rating
Health: *2
F i re : 0
Reactivity: 0
PP E: E
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 03/29/2005
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|