MATERIAL SAFETY DATA SHEET
Sikaflex Primer 260/205
HMIS
HEALTH 2
FLAMMABILITY 3
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 12/05/2003
Product Name: Sikaflex Primer 260/205
CAS Number: Not Established
Chemical Family: Alcohols
MSDS Number: 3000
Product Code: 0425000
Synonyms
SIKAFLEX PRIMER 205 GLASS WIPE
SIKAFLEX PRIMER 260
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
METHANOL 67-56-1 90 - 100
3. Hazards Identification
Eye Hazards
May cause eye irritation. May cause permanent eye injury.
Skin Hazards
May cause skin irritation. Harmful if absorbed through skin.
Ingestion Hazards
Harmful if swallowed.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sikaflex Primer 260/205
3. Hazards Identification - Continued
Inhalation Hazards
Causes respiratory tract irritation. Harmful if inhaled.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
Seek medical attention immediately.If victim is fully conscious, give one or two cups of water or milk to drink,
induce vomiting immediately if directed to do so by medical personnel.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration, seek medical attention.
5. Fire Fighting Measures
Flash Point: 53 掳F 12 掳C
Flash Point Method: ASTM D-93
Autoignition Point: N/AV 掳F
Lower Explosive Limit: N/AV
Upper Explosive Limit: N/AV
Fire And Explosion Hazards
Methyl alcohol is a dangerous fire hazard when exposed to heat, flame or oxidizers. It is explosive in its vapor
form when exposed to heat or flame. Vapors may travel to ignition sources and flash back.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Eliminate all ignition sources. Use appropriate Personal Protective Equipment (PPE). Absorb and/or contain spill with
inert materials (e.g. sand, vermiculite) and then place in appropriate container. For large spills, use water spray to
disperse vapors. PRevent runoff from entering waterways or sewers.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store in a cool, dry, well ventilated area. Keep containers tightly closed. Use only
with adequate ventilation. Ideal storage temperature: 50-80 F. To prevent static sparks, electrically ground all
equipment used in methyl alcohol storage, manufacture and transportation,. Use non sparking tools.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sikaflex Primer 260/205
8. Exposure Controls/Personal Protection
Engineering Controls
Use of a system of local and/or general exhaust is recommended to keep employee below applicable exposure
limits. Refer to the current edition of "Industrial Ventilation: A Manual of Recommended Practice" published by
the American Conference of Governmental Industrial Hygienists for information on the design, installation, use,
and maintenance of exhaust systems.
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Avoid skin contact. Wear long sleeve shirt and long pants. Chemical resistant gloves.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Expsosure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Other/General Protection
Wash thoroughly with soap and water after handling.
Ingredient(s) - Exposure Limits
METHANOL
ACGIH TLV-STEL 250 ppm (Skin)
ACGIH TLV-TWA 200 ppm (Skin)
OSHA PEL-TWA 200 ppm
9. Physical And Chemical Properties
Appearance
Clear liquid
Odor
Alcohol odor
Chemical Type: Mixture
Physical State: Liquid
Melting Point: N/AV 掳F
Boiling Point: N/AV 掳F
Specific Gravity: 0.91
Percent Volatiles: 96.7%
Percent VOCs: 96.70
Packing Density: 7.6 pounds / gallon
Vapor Pressure: N/AV
Vapor Density: >AIR
Solubility: Soluble
Evaporation Rate: Slower than ether
VOC Content: 879 gram / liter
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
Heat, open flame
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sikaflex Primer 260/205
10. Stability And Reactivity - Continued
Incompatible Materials
Oxidizing materials, beryllium dihydride, metals such as potassium or magnesium, reacts explosively with
chloroform+heat, nitric acid
Hazardous Decomposition Products
Thermal oxidative decomposition of methyl alcohol can produce CO, CO2, possible formaldehyde and acrid
smoke and irritating fumes.
Conditions To Avoid (Polymerization)
None known
11. Toxicological Information
Miscellaneous Toxicological Information
May cause effect to liver or kidneys
Conditions Aggravated By Exposure
Eye disease, skin disorders, chronic respiratory disease, liver or kidney disorders.
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
RCRA Information
Waste solutions may meet the RCRA Ignitable characteristic.
14. Transport Information
Proper Shipping Name
METHANOL SOLUTION
Hazard Class
3, PG. II
DOT Identification Number
UN1230
DOT Shipping Label
FLAMMABLE
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
Fire Hazard
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sikaflex Primer 260/205
15. Regulatory Information - Continued
SARA Title III - Section 313 Supplier Notification
This product contains the following toxic chemicals that are subject to the reporting requirements of section 313 of
the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and of 40 CFR 372.
METHANOL (67-56-1) 90 - 100 %
This information must be included on all MSDSs that are copied and distributed for this material.
SARA Section 313 Notification
This product contains the following toxic chemicals subject to the reporting requirements of Section 313 of the
Emergency Planning and Community Right-To-Know Act of 1986 and of 40 CFR 372. This information must be
included in all MSDSs that are copied and distributed for this material.
Methanol
Ingredient(s) - U.S. Regulatory Information
METHANOL
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
SARA - Acute Health Hazard
SARA - Chronic Health Hazard
SARA - Fire Hazard
Ingredient(s) - State Regulations
METHANOL
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
16. Other Information
HMIS Rating
H eal th: 2
F i re : 3
Reactivity: 0
PP E: C
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 09/24/2003
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|