MATERIAL SAFETY DATA SHEET
Sika Grout 300 PT
HMIS
HEALTH 2
FLAMMABILITY 0
REACTIVITY 0
E
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
201 Polito Ave 201 Polito Ave
Lyndhurst, NJ 07071 Lyndhurst, NJ 07071
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikausa.com Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 10/27/2005
Product Name: Sika Grout 300 PT
CAS Number: Not Established
Chemical Family: Cementitious Mortar
MSDS Number: 2713
Product Code: 0337540
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
CEMENT, PORTLAND 65997-15-1
SILICA, AMORPHOUS 7631-86-9
TRADE SECRET NJTSRN 02944800-5020p TradeSecret
TRADE SECRET NJTSRN 02944800-5133P TradeSecret
3. Hazards Identification
Eye Hazards
May cause eye irritation.
Skin Hazards
May cause skin irritation.
Ingestion Hazards
May be harmful if swallowed.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
Sika Grout 300 PT
3. Hazards Identification - Continued
Inhalation Hazards
May cause nose, throat, and lung irritation.
4. First Aid Measures
Eye
In case of contact, immediately flush eyes with plenty of water. Get medical attention immediately if irritation
develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of water. Get medical attention immediately if
irritation (redness, rash, blistering) develops and persists.
Ingestion
If victim is fully conscious, give one or two cups of water or milk to drink. Call a physician or a poison control
center immediately.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration.
5. Fire Fighting Measures
Flash Point: >200 掳F
Autoignition Point: N/AV 掳F
Fire And Explosion Hazards
None Known
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
Firefighters should wear self-contained breathing apparatus and full protective gear.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate personal protective equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Ventilate enclosed area.
7. Handling And Storage
Storage Precautions
Keep containers tightly closed. Keep out of reach of children.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation.
Eye/Face Protection
Safety glasses with side shields or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing. Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
Page 2 of 4
MATERIAL SAFETY DATA SHEET
Sika Grout 300 PT
8. Exposure Controls/Personal Protection - Continued
Respiratory Protection - Continued
conditions warrant a respirator's use. In areas where the Permissible Expsosure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Ingredient(s) - Exposure Limits
CEMENT, PORTLAND
ACGIH TLV-TWA - 10 mg/m3
OSHA PEL -TWA - 15 mg/m3 (total dust)
OSHA PEL - TWA - 5 mg/m3 (respirable dust)
SILICA, AMORPHOUS
ACGIH TLV-TWA 10 mg/m3
OSHA PEL-TWA 20 mppcf
OSHA PEL-TWA 80 / %SiO2 mg/m3
9. Physical And Chemical Properties
Appearance
Gray Fine Powder
Odor
Product is odorless. Faint ammonia like smell may be present during curing.
Chemical Type: Mixture
Physical State: Solid
Percent Volatiles: N/AV
Packing Density: N/AV
Vapor Pressure: N/AV
Vapor Density: N/A
Solubility: N/AV
Evaporation Rate: N/AV
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will Not Occur
Conditions To Avoid (Stability)
None Known
Incompatible Materials
None Known
Hazardous Decomposition Products
None Known
Conditions To Avoid (Polymerization)
None Known
11. Toxicological Information
Ingredient(s) - Carginogenicity
SILICA, AMORPHOUS
Listed In The IARC Monographs
Page 3 of 4
MATERIAL SAFETY DATA SHEET
Sika Grout 300 PT
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.
Waste generators must determine whether a discarded material is classified as a hazardous waste. USEPA guidelines
for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state
and local hazardous waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not regulated by the USDOT.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
Ingredient(s) - State Regulations
SILICA, AMORPHOUS
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
16. Other Information
HMIS Rating
H eal th: 2
F i re : 0
Reactivity: 0
PP E: E
Revision/Preparer Information
MSDS Preparer: EHS Department
This MSDS Supercedes A Previous MSDS Dated: 11/11/2002
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|