MATERIAL SAFETY DATA SHEET
Sika Fiber N
HMIS
HEALTH 1
FLAMMABILITY 1
REACTIVITY 0
B
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Polymer Group, Inc.
201 Polito Ave P.O.BOX 517
Lyndhurst, NJ 07071 Kingman, KS 67068
Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: (620) 532-4000
FAX Number: 201-933-9379
Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 None Given
INTERNATIONAL: 703-527-3887
Issue Date: 04/21/2006
Product Name: Sika Fiber N
CAS Number: Not Established
Chemical Family: Synthetic Fiber
MSDS Number: 3831
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
ADIPIC ACID-HEAMETHYLONEDIAMINE FIBER 32131-17-2
3. Hazards Identification
Eye Hazards
May act as a mechanical irritant.
Skin Hazards
Handling this product may result in mechanical skin irritation.
Ingestion Hazards
Not normally ingested in industrial use. May be harmful if swallowed.
Inhalation Hazards
May cause respiratory tract irritation.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
Sika Fiber N
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately wash skin with soap and plenty of tepid water for at least 15 minutes. Get
medical attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Inhalation
Treat any irritation symptomatically. Obtain medical attention if irritation develops and persists.
5. Fire Fighting Measures
Flash Point: 581-592 掳F
Flash Point Method: ASTM-D 1929-77
Autoignition Point: 905 掳F
Fire And Explosion Hazards
During a fire, irritating and/or toxic gases and aerosols from the decomposition/combustion products may be
present.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Using appropriate personal protective equipment (PPE), shovel material into waste
containers taking care to minimize dust. Dampen if necessary to control dust. Vacuum clean dust with equipment fitted
with High Efficiency Particulate Air (HEPA) filters.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store in a cool, dry, well ventilated area. Keep containers tightly closed. Do not
handle or store near an open flame, heat or other sources of ignition. Protect material from direct sunlight. This
material is not a static accumulator, but use proper grounding procedures.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
Sika Fiber N
8. Exposure Controls/Personal Protection - Continued
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use.
9. Physical And Chemical Properties
Appearance
Nylon Concrete Fiber
Odor
None
Chemical Type: Pure
Melting Point: 490-510 掳F
Solubility: Insoluble in water
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
None Known
Incompatible Materials
None Known
Conditions To Avoid (Polymerization)
None Known
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not Regulated by the US D.O.T.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
Page 3 of 4
MATERIAL SAFETY DATA SHEET
Sika Fiber N
15. Regulatory Information - Continued
U.S. Regulatory Information - Continued
16. Other Information
HMIS Rating
H eal th: 1
F i re : 1
Reactivity: 0
PP E: B
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
Disclaimer
The information contained in this Material Safety Data Sheet applies only to the actual Sika Corporation ("Sika")
product identified and described herein. This information is not intended to address, nor does it address the use
or application of the identified Sika product in combination with any other material, product or process. All of the
information set forth herein is based on technical data regarding the identified product that Sika believes to be
reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the
warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data
Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this
MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS
INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacorp.com or
201-933-8800.
Sika Corporation
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|