MATERIAL SAFETY DATA SHEET
Sika Fiber MS
HMIS
HEALTH 1
FLAMMABILITY 0
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Polymer Group, Inc.
201 Polito Ave 701 East Ave. A
Lyndhurst, NJ 07071 Kingman, KS 67068
Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: (620) 532-4000
FAX Number: 201-933-9379
Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 None Given
INTERNATIONAL: 703-527-3887
Issue Date: 07/12/2006
Product Name: Sika Fiber MS
CAS Number: Not Established
Chemical Family: Polypropylene/polyethylene fiber
MSDS Number: 3937
2. Composition/Information On Ingredients
This products contains no hazardous ingredients when evaluated by criteria established in the OSHA Hazard
Communication Standard (29 CFR 1910.1200).
3. Hazards Identification
Eye Hazards
Eye contact is unlikely in normal use. May act as a mechanical irritant.
Skin Hazards
Handling product may result in cuts to the hands.
Ingestion Hazards
Not normally ingested in industrial use. If ingested may irritate gastrointestinal system.
Inhalation Hazards
No inhalation hazards are expected under normal use.
4. First Aid Measures
No Data Available...
Page 1 of 4
MATERIAL SAFETY DATA SHEET
Sika Fiber MS
4. First Aid Measures - Continued
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Seek medical attention
immediately.
Inhalation
Treat any irritation symptomatically. Obtain medical attention if irritation develops and persists.
5. Fire Fighting Measures
Flash Point: N/A 掳F
Autoignition Point: N/A 掳F
Lower Explosive Limit: N/A
Upper Explosive Limit: N/A
Fire And Explosion Hazards
None Known.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Using appropriate personal protective equipment (PPE), Scrape / pick-up and place
in a suitable container for disposal.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store in a cool, dry, well ventilated area. Keep containers tightly closed. Avoid
storing near oxidizers. Avoid sources of ignition. Use caution when stacking to avoid unstable conditions. Store at
temperatures below 140F.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
General room ventilation is normally adequate. If heated, use with adequate general and local exhaust ventilation.
Refer to the current edition of "Industrial Ventilation: A Manual of Recommended Practice" published by the
American Conference of Governmental Industrial Hygienists for information on the design, installation, use, and
maintenance of exhaust systems.
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
Sika Fiber MS
8. Exposure Controls/Personal Protection - Continued
Skin Protection
Gloves, lab coat and/or other work clothing to prevent skin exposure.
Respiratory Protection
None normally required. If needed, a respirator protection program that meets 29 CFR 1910.134 requirement
must be followed whenever workplace conditions warrant a respirator's use.
9. Physical And Chemical Properties
Appearance
Gray fiber
Odor
None
Chemical Type: Mixture
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will Not Occur
Conditions To Avoid (Stability)
Strong Oxidizing Agents
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not Regulated By US D.O.T.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
16. Other Information
HMIS Rating
H eal th: 1
F i re : 0
Page 3 of 4
MATERIAL SAFETY DATA SHEET
Sika Fiber MS
16. Other Information - Continued
HMIS Rating - Continued
Reactivity: 0
Personal Protection: C
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
Disclaimer
The information contained in this Material Safety Data Sheet applies only to the actual Sika Corporation ("Sika")
product identified and described herein. This information is not intended to address, nor does it address the use
or application of the identified Sika product in combination with any other material, product or process. All of the
information set forth herein is based on technical data regarding the identified product that Sika believes to be
reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the
warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data
Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this
MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS
INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacorp.com or
201-933-8800.
Sika Corporation
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|