MATERIAL SAFETY DATA SHEET
-------------------------------------------- I. PRODUCT IDENTIFICATION ---------------------------------
TRADE NAME (as labeled): L-300 Rapid - Part B; Super Epoxy 2000 - Part B, 2000LT Part B, 2001 Part B
CHEMICAL FAMILY: Epoxy Resin Reviewed & Approved By:
Steven B. Fine
Steven B. Fine
MANUFACTURER'S NAME: Laticrete International, Inc. Sr. Research Chemist/Safety Officer
1 Laticrete Park, N.
Bethany, CT 06524-3423 UsA
Phone number for additional information: (203) 393-0010
Date prepared or revised: 01/01/00 Name of preparer: R. Rooshenas
-------------------------------------------- II. HAZARDOUS INGREDIENTS -----------------------------
OTHER
CHEMICAL NAMES CAS NUMBERS PERCENT ACGIH TLV OSHA PEL (SPECIFY)
Phenol, 4,4'-(1 - methylethylidene) Bis-,
polymer w/ (chloromethyl)oxirane 25068-38-6 N/A N/A N/A N/A
Phenol-Formaldehyde Polymer Glycidyl
Ether 28064-14-4 N/A N/A N/A N/A
W.H.M.I.S. Code D.2
N/A = Not applicable or available
------------------------------------------------ III. PHYSICAL PROPERTIES ------------------------------------
Vapor density (air=1): N/A Melting point or range,掳F: N/A
Boiling point or range, 掳F: >392 (200 掳C)
Specific gravity: 1.17
Solubility in water: Insoluble Evaporation rate (butyl acetate = 1): N/A
Vapor pressure, mmHg at 20掳C: N/A
Appearance and odor: N/A
HOW TO DETECT THIS SUBSTANCE (warning properties of substance as a gas, vapor, dust, or mist): N/A
---------------------------------------------------------------------------------------------------------------------------------
This information is furnished without warranty, representation, inducement or license of any kind; except that it is
accurate to the best of our knowledge, or obtained from sources believed by us to be accurate.
L-300 Rapid - Part B; Super Epoxy 2000 - Part B, 2000LT Part B, 2001 Part B
---------------------------------------------- IV. FIRE AND EXPLOSION ---------------------------------------
Flash Point, 掳F (give method): > 200掳 F
Auto ignition temperature,掳F: N/A
Flammable limits in air, volume %: N/A Lower (LEL) Upper (UEL)
Fire extinguishing materials:
X water spray X carbon dioxide other:
X foam X dry chemical
Special fire fighting procedures: N/A
Unusual fire and explosion hazards: Decomposition & combustion products may be toxic
------------------------------------------ V. HEALTH HAZARD INFORMATION -----------------------------------
SYMPTOMS OF OVEREXPOSURE for each potential route of exposure.
Inhaled: N/A
Contact with skin or eyes: Slight irritation
Absorbed through skin: Slight irritation
Swallowed: N/A
----------------------------------------------------------------------------------------------------------------------------------
HEALTH EFFECTS OR RISKS FROM EXPOSURE. Explain in lay terms. Attach extra page if more space is needed:
Acute: Over exposure causes irritation, sensitization & dermatitis
Chronic: N/A
---------------------------------------------------------------------------------------------------------------------------------
FIRST AID: EMERGENCY PROCEDURES
Eye Contact: Flush with large amounts of water for at least 15 minutes, call a physician
Skin Contact: Wash with soap and water
Inhaled: Remove to fresh air. Give oxygen if breathing is difficult
Swallowed: Give large quantities of water, get medical attention
---------------------------------------------------------------------------------------------------------------------------------
SUSPECTED CANCER AGENT?
X NO: This product's ingredients are not found in the lists below.
YES: Federal OSHA NTP IARC
-----------------------------------------------------------------------------------------------------------------------------------
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Allergy, Eczema, or skin conditions
L-300 Rapid - Part B; Super Epoxy 2000 - Part B, 2000LT Part B, 2001 Part B
---------------------------------------------------- VI. REACTIVITY DATA ------------------------------------
Stability: X Stable Unstable
Conditions to avoid: N/A
Incompatibility (materials to avoid): Strong oxidizing agents
Hazardous decomposition products (including combustion products): Carbon monoxide, carbon dioxide, aldehydes
Hazardous polymerization: May occur X Will not occur
Conditions to avoid: Strong acid or bases in bulk
----------------------------------- VII. SPILL, LEAK, AND DISPOSAL PROCEDURES ---------------------
Spill response procedures (include employee protection measures): Take up with absorbent material shovel into a
closeable container. Flush contaminated area with water. (Avoid all personal contact).
Preparing wastes for disposal (container types, neutralization, etc.): N/A
NOTE: Dispose of all wastes in accordance with federal, state and local regulations.
-------------------------------------- VIII. SPECIAL HANDLING INFORMATION ----------------------------
Ventilation and engineering controls: Good ventilation
Respiratory protection (type): Use NIOSH approved respirator suitable for organic vapors, if required
Eye protection (type): Goggles
Gloves (specify material): Impervious gloves
Other clothing and equipment: Use of barrier cream recommended
Work practices, hygienic practices: N/A
Other handling and storage requirements: N/A
Protective measures during maintenance of contaminated equipment: N/A
0300B.DOC
|