The Official NAPAonline.com E-commerce Site | Shop NAPAonline Page 1 of 6
0
Change Vehicle
Material Safety
Data Sheet (MSDS)
Keyword
NAPA Part No.
MATERIAL SAFETY DATA SHEET
Non-NAPA Part No.
The Valvoline Company Page 001
Date Prepared: 01/14/02
Date Printed: 09/03/03
MSDS No: 505.0170829-014.004
ALL CLIMATE MOTOR OIL SAE 10W30
Job Type Search
__________________________________________________________________________
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Material Identity
Product Name: ALL CLIMATE MOTOR OIL SAE 10W30
SAP Material No: VV124
General or Generic ID: PETROLEUM BASED-LUBRICATING OIL
Enter Zip Company Telephone Numbers
Parts Store The Valvoline Company Emergency: 1-800-274-5263
Repair Shop P.O. Box 14000
Collision Center Lexington, KY 40512 Information: 1-859-357-7206
Truck Center __________________________________________________________________________
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient(s) CAS Number % (by weight)
-------------------------------------------- ------------- -------------
ALIPHATIC PETROLEUM DISTILLATES 64742-65-0 79.0- 89.0
DETERGENT/DISPERSANT ENGINE OIL PACKAGE
ZINC COMPOUNDS
__________________________________________________________________________
3. HAZARDS IDENTIFICATION
Potential Health Effects
Eye
May cause mild eye irritation.
Skin
May cause mild skin irritation. Prolonged or repeated contact may
dry and crack the skin. Additional symptoms of skin contact may
include: acne, Passage of this material into the body through the
skin is possible, but it is unlikely that this would result in
Click here to apply for the
harmful effects during safe handling and use.
NAPA VISA漏 Card
MATERIAL SAFETY DATA SHEET
The Valvoline Company Page 002
Date Prepared: 01/14/02
Date Printed: 09/03/03
MSDS No: 505.0170829-014.004
ALL CLIMATE MOTOR OIL SAE 10W30
__________________________________________________________________________
Swallowing
Swallowing small amounts of this material during normal handling
is not likely to cause harmful effects. Swallowing large amounts
may be harmful.
Inhalation
It is possible to breathe this material under certain conditions
of handling and use (for example, during heating, spraying, or
stirring). Breathing small amounts of this material during normal
handling is not likely to cause harmful effects. Symptoms usually
occur at air concentrations higher than the recommended exposure
limits (See Section 8).
Symptoms of Exposure
Signs and symptoms of exposure to this material through breathing,
swallowing, and/or passage of the material through the skin may
http://www.napaonline.com/cgi-bin/ncommerce3/ExecMacro/NAPAonline/msds_data.d2... 2/16/2004
The Official NAPAonline.com E-commerce Site | Shop NAPAonline Page 2 of 6
include: stomach or intestinal upset (nausea, vomiting, diarrhea)
irritation (nose, throat, airways), blood abnormalities (breakage
of red blood cells), liver damage.
Target Organ Effects
No data
Developmental Information
There are no data available for assessing risk to the fetus from
maternal exposure to this material.
Cancer Information
This material is not listed as a carcinogen by the International
Agency for Research on Cancer, the National Toxicology Program, or
the Occupational Safety and Health Administration. Used motor oil
has been shown to cause skin cancer in laboratory animals
continually exposed by repeated applications. Avoid prolonged or
repeated skin contact.
Other Health Effects
No data
MATERIAL SAFETY DATA SHEET
The Valvoline Company Page 003
Date Prepared: 01/14/02
Date Printed: 09/03/03
MSDS No: 505.0170829-014.004
ALL CLIMATE MOTOR OIL SAE 10W30
__________________________________________________________________________
Primary Route(s) of Entry
Inhalation, Skin absorption, Skin contact, Eye contact, Ingestion.
__________________________________________________________________________
4. FIRST AID MEASURES
Eyes
If symptoms develop, move individual away from exposure and into
fresh air. Flush eyes gently with water while holding eyelids
apart. If symptoms persist or there is any visual difficulty,
seek medical attention.
Skin
Remove contaminated clothing. Wash exposed area with soap and
water. If symptoms persist, seek medical attention. Launder
clothing before reuse.
Swallowing
Seek medical attention. If individual is drowsy or unconscious,
do not give anything by mouth; place individual on the left side
with the head down. Contact a physician, medical facility, or
poison control center for advice about whether to induce vomiting.
If possible, do not leave individual unattended.
Inhalation
If symptoms develop, move individual away from exposure and into
fresh air. If symptoms persist, seek medical attention. If
breathing is difficult, administer oxygen. Keep person warm and
quiet; seek immediate medical attention.
Note to Physicians
Acute aspiration of large amounts of oil-laden material may
produce a serious aspiration pneumonia. Patients who aspirate
these oils should be followed for the development of long-term
sequelae. Repeated aspiration of small quantities of mineral oil
can produce chronic inflammation of the lungs (i.e. lipoid
pneumonia) that may progress to pulmonary fibrosis. Symptoms are
often subtle and radiological changes appear worse than clinical
abnormalities. Occasionally, persistent cough, irritation of the
upper respiratory tract, shortness of breath with exertion, fever,
and bloody sputum occur. Inhalation exposure to oil mists below
current workplace exposure limits is unlikely to cause pulmonary
MATERIAL SAFETY DATA SHEET
The Valvoline Company Page 004
Date Prepared: 01/14/02
Date Printed: 09/03/03
MSDS No: 505.0170829-014.004
ALL CLIMATE MOTOR OIL SAE 10W30
__________________________________________________________________________
abnormalities. Preexisting disorders of the following organs ( or
organ systems) may be aggravated by exposure to this material:
skin.
__________________________________________________________________________
http://www.napaonline.com/cgi-bin/ncommerce3/ExecMacro/NAPAonline/msds_data.d2... 2/16/2004
The Official NAPAonline.com E-commerce Site | Shop NAPAonline Page 3 of 6
5. FIRE FIGHTING MEASURES
Flash Point
430.0 F (221.1 C) COC
Explosive Limit
No data
Autoignition Temperature
No data
Hazardous Products of Combustion
May form: carbon dioxide and carbon monoxide, oxides of sulfur,
nitrogen and phosphorus, various hydrocarbons.
Fire and Explosion Hazards
Never use welding or cutting torch on or near drum (even empty)
because product (even just residue) can ignite explosively. No
special fire hazards are known to be associated with this product.
Dense smoke may be generated while burning.
Extinguishing Media
regular foam, carbon dioxide, dry chemical.
Fire Fighting Instructions
Water or foam may cause frothing which can be violent and possibly
endanger the life of the firefighter. Water may be used to keep
fire-exposed containers cool until fire is out. Wear a
self-contained breathing apparatus with a full facepiece operated
in the positive pressure demand mode with appropriate turn-out
gear and chemical resistant personal protective equipment. Refer
to the personal protective equipment section of this MSDS.
MATERIAL SAFETY DATA SHEET
The Valvoline Company Page 005
Date Prepared: 01/14/02
Date Printed: 09/03/03
MSDS No: 505.0170829-014.004
ALL CLIMATE MOTOR OIL SAE 10W30
__________________________________________________________________________
NFPA Rating
Health - 1, Flammability - 1, Reactivity - 0
__________________________________________________________________________
6. ACCIDENTAL RELEASE MEASURES
Small Spill
Absorb liquid on vermiculite, floor absorbent or other absorbent
material. Persons not wearing proper personal protective
equipment should be excluded from area of spill.
Large Spill
Prevent run-off to sewers, streams or other bodies of water. If
run-off occurs, notify proper authorities as required, that a
spill has occured. Persons not wearing protective equipment
should be excluded from area of spill until clean-up has been
completed.
__________________________________________________________________________
7. HANDLING AND STORAGE
Handling
Containers of this material may be hazardous when emptied. Since
emptied containers retain product residues (vapor, liquid, and/or
solid), all hazard precautions given in the data sheet must be
observed. All five gallon pails and larger metal containers
including tank cars and tank trucks should be grounded and/or
bonded when material is transferred. Precautions during use:
avoid prolonged or frequently repeated skin contact with this
material. Skin contact can be mininized by wearing impervious
protective gloves. As with all products of this nature, good
personal hygiene is essential. Hands and other exposed areas
should be washed thoroughly with soap and water after contact,
especially before eating and/or smoking. Regular laundering of
contaminated clothing is essential to reduce indirect skin contact
with this material. Warning. Sudden release of hot organic
chemical vapors or mists from process equipment operating at
elevated temperature and pressure, or sudden ingress of air into
vacuum equipment, may result in ignitions without the presence of
obvious ignition sources. Published "autoignition" or "ignition"
temperature values cannot be treated as safe operating
MATERIAL SAFETY DATA SHEET
The Valvoline Company Page 006
Date Prepared: 01/14/02
http://www.napaonline.com/cgi-bin/ncommerce3/ExecMacro/NAPAonline/msds_data.d2... 2/16/2004
The Official NAPAonline.com E-commerce Site | Shop NAPAonline Page 4 of 6
Date Printed: 09/03/03
MSDS No: 505.0170829-014.004
ALL CLIMATE MOTOR OIL SAE 10W30
__________________________________________________________________________
temperatures in chemical processes without analysis of the actual
process conditions. Any use of this product in elevated
temperature processes should be thoroughly evaluated to establish
and maintain safe operating conditions.
Storage
Do not store near extreme heat, open flame, or sources of
ignition.
__________________________________________________________________________
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Eye Protection
Not required under normal conditions of use. However, if misting
or splashing conditions exist, then safety glasses or chemical
splash goggles are advised.
Skin Protection
Not normally required. However, wear resistant gloves such as
nitrile rubber to prevent irritation which may result from
prolonged or repeated skin contact with product., To prevent
repeated or prolonged skin contact, wear impervious clothing and
boots. Wear normal work clothing covering arms and legs..
Respiratory Protections
If workplace exposure limit(s) of product or any component is
exceeded (See Exposure Guidelines), a NIOSH/MSHA approved air
supplied respirator is advised in absence of proper environmental
control. OSHA regulations also permit other NIOSH/MSHA
respirators (negative pressure type) under specified conditions
(consult your industrial hygienist). Engineering or
administrative controls should be implemented to reduce exposure.
Not required under normal conditions of use. However, if oil
mists are generated above recommended PEL/TLV of 5 mg/m3, then a
NIOSH/MSHA approved respirator is advised in absence of proper
environmental control. (See your industrial hygienist.)
MATERIAL SAFETY DATA SHEET
The Valvoline Company Page 007
Date Prepared: 01/14/02
Date Printed: 09/03/03
MSDS No: 505.0170829-014.004
ALL CLIMATE MOTOR OIL SAE 10W30
__________________________________________________________________________
Engineering Controls
Provide sufficient mechanical (general and/or local exhaust)
ventilation to maintain exposure below TLV(s).
Exposure Guidelines
Component
----------
ALIPHATIC PETROLEUM DISTILLATES (64742-65-0)
OSHA VPEL 5.000 mg/m3 - TWA
ACGIH TLV 5.000 mg/m3 - TWA
DETERGENT/DISPERSANT ENGINE OIL PACKAGE
No exposure limits established
ZINC COMPOUNDS
No exposure limits established
__________________________________________________________________________
9. PHYSICAL AND CHEMICAL PROPERTIES
Boiling Point
(for component) > 425.0 F (218.3 C) @ 760.00 mmHg
Vapor Pressure
Not applicable
Specific Vapor Density
No data
Specific Gravity
.882 @ 60.00 F
Liquid Density
7.340 lbs/gal @ 60.00 F
.882 kg/l @ 15.60 C
MATERIAL SAFETY DATA SHEET
The Valvoline Company Page 008
Date Prepared: 01/14/02
http://www.napaonline.com/cgi-bin/ncommerce3/ExecMacro/NAPAonline/msds_data.d2... 2/16/2004
The Official NAPAonline.com E-commerce Site | Shop NAPAonline Page 5 of 6
Date Printed: 09/03/03
MSDS No: 505.0170829-014.004
ALL CLIMATE MOTOR OIL SAE 10W30
__________________________________________________________________________
Percent Volatiles (Including Water)
No data
Evaporation Rate
SLOWER THAN ETHYL ETHER
Appearance
DRY, CLEAR & BRIGHT
State
LIQUID
Physical Form
Not applicable
Color
No data
Odor
No data
pH
Not applicable
Viscosity
<= 3300.0 cps @ -20 C
10.0 - 11.0 cst @ 100 C
__________________________________________________________________________
10. STABILITY AND REACTIVITY
Hazardous Polymerization
Product will not undergo hazardous polymerization.
Hazardous Decomposition
May form: aldehydes, carbon dioxide and carbon monoxide, hydrogen
sulfide, oxides of sulfur, nitrogen and phosphorus, toxic fumes,
various hydrocarbons.
MATERIAL SAFETY DATA SHEET
The Valvoline Company Page 009
Date Prepared: 01/14/02
Date Printed: 09/03/03
MSDS No: 505.0170829-014.004
ALL CLIMATE MOTOR OIL SAE 10W30
__________________________________________________________________________
Chemical Stability
Stable.
Incompatibility
Avoid contact with: acids, halogens, strong oxidizing agents.
__________________________________________________________________________
11. TOXICOLOGICAL INFORMATION
No data
__________________________________________________________________________
12. ECOLOGICAL INFORMATION
No data
__________________________________________________________________________
13. DISPOSAL CONSIDERATION
Waste Management Information
Dispose of in accordance with all applicable local, state and
federal regulations.
__________________________________________________________________________
14. TRANSPORT INFORMATION
DOT Information - 49 CFR 172.101
DOT Description:
Not Regulated
Container/Mode:
CASES/SURFACE - NO EXCEPTIONS
MATERIAL SAFETY DATA SHEET
The Valvoline Company Page 010
Date Prepared: 01/14/02
Date Printed: 09/03/03
MSDS No: 505.0170829-014.004
ALL CLIMATE MOTOR OIL SAE 10W30
__________________________________________________________________________
NOS Component:
None
RQ (Reportable Quantity) - 49 CFR 172.101
Not applicable
http://www.napaonline.com/cgi-bin/ncommerce3/ExecMacro/NAPAonline/msds_data.d2... 2/16/2004
The Official NAPAonline.com E-commerce Site | Shop NAPAonline Page 6 of 6
__________________________________________________________________________
15. REGULATORY INFORMATION
US Federal Regulations
TSCA (Toxic Substances Control Act) Status
TSCA (UNITED STATES) The intentional ingredients of this
product are listed.
CERCLA RQ - 40 CFR 302.4
None
SARA 302 Components - 40 CFR 355 Appendix A
None
Section 311/312 Hazard Class - 40 CFR 370.2
Immediate(X) Delayed(X) Fire( ) Reactive( ) Sudden
Release of Pressure( )
SARA 313 Components - 40 CFR 372.65
Section 313 Component(s) CAS Number
---------------------------------------- -------------
ZINC C1-C14 ALKYLDITHIOPHOSPHATE 68649-42-3
International Regulations
Inventory Status
DSL (CANADA) The intentional ingredients of this product are
listed.
State and Local Regulations
California Proposition 65
None
MATERIAL SAFETY DATA SHEET
The Valvoline Company Page 011
Date Prepared: 01/14/02
Date Printed: 09/03/03
MSDS No: 505.0170829-014.004
ALL CLIMATE MOTOR OIL SAE 10W30
__________________________________________________________________________
16. OTHER INFORMATION
The information accumulated herein is believed to be accurate but
is not warranted to be whether originating with the company or
not. Recipients are advised to confirm in advance of need that the
information is current, applicable, and suitable to their
circumstances.
circumstances.
Return to previous page.
Return to top of page.
About NAPAonline Customer Support Privacy/Legal SiteMap
漏2002, National Automotive Parts Association
This site is best viewed using JavaScript-enabled Internet Explorer Version 5.0 and above.
--
For best printing results, please use Internet Explorer.
http://www.napaonline.com/cgi-bin/ncommerce3/ExecMacro/NAPAonline/msds_data.d2... 2/16/2004
|