May be used to comply with Occupational Safety and Health Administration
OSHA's Hazard Communication Standard, (Non-Mandatory Form)
29 CFR 1910.1200. Standard Must Be Form Approved
Consulted for Specific Requirements OMB No. 1218-0072
IDENTITY (As Used on Label and List) NOTE: Blank spaces are not permitted. If any item is not applicable, or no
information is available, the space must be marked to indicate that
Dixon Permanent Markers
SECTION I
Manufacturer's Name Emergency Telephone Number
DIXON TICONDEROGA (419) 625-9545
Address( Number, Street, City, State, and ZIP) Telephone Number for Information
(419) 625-9545
Date Prepared
Route 61
Deer Lake, PA 17961 05/24/00
Signature of Preparer (optional)
SECTION II - HAZARDOUS INGREDIENTS/INDENTITY INFORMATION
Hazardous Components Other Limits
(Specific Chemical Identity; Common Name(s)) OSHA PEL ACGIH TLV Recommended %Optional
Markers are coonsidered to be articles and as such are not required to have an
MSDS prepared for them. This document is prepared for the convenience of our customers.
Products bearing the CP certified seal or AP approved product seal of the Art and Carft Materials, Inc.
are certified in a program of toxicological evaluation by a medical expert, subject to review by the
institute's toxicological advisory board to contain no material in sufficient quantities to be toxic
or injurios to humans or cause acute or chronic health problems.
Conforms to ASTM D4236
SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point Specific Gravity (H2O = 1)
N\A N\A
Vapor Pressure (mm Hg) Melting Point
N/A N/A
Vapor Density (Air=1) Evaporation Rate
(Butyl Acetate = 1)
N/A N/A
Solubility In Water
N\A
Appearance and Odor
Various odors and colors.
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
Flash Point (Method Used) Flammable Limits LEL UEL
N/A N/A N/A N/A
Extinguishing Media
Use approved H2O, CO2, or foam spray fire extinguisher.
Special Fire Fighting Procedures
Use a self contained breathing apparatus when fighting a fire.
Unusual Fire and Explosion Hazards
Keep away from heat or flame.
(Reproduce Locally) OSHA 174, SEPT. 1985
Page 1
|::
SECTION V - REACTIVITY DATA
Stability Unstable Conditions To Avoid
Stable NONE
YES
Incompatibility (Materials To Avoid)
NONE
Hazardous Decomposition or Byproducts
As with all burning organic matter, Carbon Monoxide and other toxic fumes may be given off.
Hazardous May Occur Conditions To Avoid
Polymerization
Will Not Occur NONE
X
SECTION VI - HEALTH HAZARD DATA
Route(s) Of Entry: Inhalation? Skin? Ingestion?
NO YES YES
Health Hazards (Acute and Chronic)
Conforms to ASTM D-4236
Carcinogenicity: NTP? IARC Monographs? OSHA Regulated?
N/A N/A N/A
Signs and Symptoms of Exposure
N/A
Medical Conditions Generally Aggravated by Exposure
N/A
Emergency and First Aid Procedures
Eyes--flush with copious amounts of water and contact a physician
Contact with skin--Wash area with soap and water; Ingestion--seek medical attention;
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to Be Taken in Case Material Is Released or Spilled
Contain and place in approved containers.
Waste Disposal Method
Dispose of per all Local, State, and Federal Regulations.
Precautions to Be Taken in Handling and Storing
Do not store near heat or open flame.
Other Precautions
None
SECTION VIII - CONTROL MEASURES
Respiratory Protection (specify Type)
N/A
Ventilation Local Exhaust Special
OKAY N/A
Mechanical (General) Other
OKAY N/A
Protective Gloves Eye Protection
N/A YES
Other Protective Clothing or Equipment
N/A
Work/Hygenic Practices
Contents will stain most fabrics, use of smocks, gloves, etc to protect
personel clothing is suggested. Wash hands and surfaces after use.
Page 2 * USGPO 1986-491-529/45775
Page 2
|