MSDS for 071 IronClad Quick Dry Industrial Enamel Page 1 of 3
MATERIAL SAFETY DATA SHEET Rev 07100.03B
For Coating, Resins, and Related Materials NPCA 1-84
MANUFACTURER'S NAME EMERGENCY TELEPHONE NO.
BENJAMIN MOORE & Co. 800-424-9300 (CHEMTREC)
51 CHESTNUT RIDGE RD.
MONTVALE, NJ 07645
DATE OF PREPARATION INFORMATION TELEPHONE
28-MAR-94 (Sup. 25-JUN-90) 201-573-9600
================================================================================
SECTION I - PRODUCT ID
================================================================================
HMIS CODE SARA TITLE 312
PRODUCT CODE: 071,C071,D071 | | | Acute: NO |
CLASS: SOLVENT THINNED PAINT | Health: 1* | | Chronic: YES |
NAME: IRONCLAD QUICK DRY INDUSTRIAL | Flammability: 2 | | Fire: YES |
ENAMEL | Reactivity: 0 | | Pressure: NO |
COLOR: ALL | Personal Prot.: G| | React: NO |
================================================================================
SECTION II - HAZARDOUS INGREDIENTS
================================================================================
INGREDIENT MAX PCT CAS NO.
TLV PEL STEL CEIL MM Hg TEMP
Stoddard Solvent (fn) 47.1 8052413
100ppm 100ppm N/E N/E 2.0 @ 20
Xylene (f3n) 2.2 1330207
100ppm 100ppm 150ppm N/E 21 @ 38
Ethyl Benzene (f3n) 1.4 100414
100ppm 100ppm 125ppm N/E 10 @ 20
Bentonite Clay (f*) 1.2 121888662
0.1mg/m3 N/E N/A
Silica, Crystalline 0.3 14808607
(f*n) .1mg/m3 .1mg/m3 N/E N/E N/A
Titanium Dioxide (f*) 26.1 13463677
10mg/m3 10mg/m3 N/E N/E N/A
Petroleum Distillates, 12.1 8002059
n.o.s. (fn) 300ppm 300ppm 400ppm 26 @100
Hydrous Alum Silicates 8.2 1332587
(f*) 10mg/m3 10mg/m3 N/E N/E N/A
Pigment Blue (f*) 2.4 147148
1mg/m3 1mg/m3 N/E N/E N/A
C.I. Yellow 11741 (f*) 6.3 6358312
10mg/m3 15mg/m3 N/E N/E N/A
Iron Oxide (f*n) 9.3 1309371
5mg/m3 10mg/m3 N/E N/E N/A
Phthalocyanine Green 1.5 1328536
(f*) 1mg/m3 1mg/m3 N/E N/E N/A
C.I. Yellow 77492 (f*) 8.1 51274001
10mg/m3 10mg/m3 N/E N/E N/A
Carbon Black (f*n) 3.1 1333864
7mg/m3 3.5mg/m3 N/E N/E N/A
Talc (f*n) 32.6 14807966
2mg/m3
2mg/m3 N/E N/E N/A
f Federal Hazard List
* Hazardous only as dust when product is sanded.
3 Sect. 313 of the Emergency Planning & Community Right-To-Know Act of 1986
and of 40 CFR 37
http://www.benjaminmoore.com/msds/MSDS/071.html 12/31/98
MSDS for 071 IronClad Quick Dry Industrial Enamel Page 2 of 3
n New Jersey Label Law hazardous chemical
This product may contain small amounts of materials known to the
State of California to cause cancer and reproductive harm.
================================================================================
SECTION III - PHYSICAL DATA
================================================================================
BOILING RANGE: 313 to 405 F VAPOR DENSITY: HEAVIER THAN AIR
WEIGHT PER GAL: 7.5 - 10.0
EVAPORATION RATE: SLOWER THAN ETHER % VOLATILE VOLUME: 43.1 - 60.3
================================================================================
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
================================================================================
D.O.T. FLAMMABILITY CLASSIFICATION: COMBUSTIBLE FLASH PT.: 107 F PMCC
LEL: 1.0%
EXTINGUISHING MEDIA: FOAM CO2 DRY CHEMICAL WATER FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS: Closed containers may burst to extreme heat
or fire. Toxic gases may form when product burns.
SPECIAL FIREFIGHTING PROCEDURES: Do not use water stream on burning liquid.
Cool exposed container with water. use self-contained breathing apparatus.
================================================================================
SECTION V - HEALTH HAZARD DATA
================================================================================
EFFECTS OF OVEREXPOSURE - ACUTE:
Inhalation - Harmful if inhaled. May affect the brain or nervous system,
causing dizziness, headache or nausea.
Contact - Causes eye irritation. Contact - Causes skin irritation.
Ingestion - Irritation of the digestive tract and nervous system depression
(drowsiness, dizziness, loss of coordination and fatigue). Aspiration Hazard -
This material can enter lungs during swallowing or vomiting and cause lung
inflammation and damage.
EFFECTS OF OVEREXPOSURE - CHRONIC:
Skin Contact - Prolonged or repeated exposure may cause dermititis.
Inhalation statement: Sanding dust inhalation may cause lung damage.
Crystalline silica has been classified as probably carcinogenic for humans (2A)
by IARC. NOTICE: Reports have associated permanent brain and nervous system
damage with repeated, prolonged overexposure to solvents among persons engaged
in the painting trade. Intentional misuse by deliberately concentrating and
inhaling the contents may be harmful or fatal.
MEDICAL CONDITIONS PRONE TO AGGRAVATION BY EXPOSURE:
None expected when used in accordance with Safe Handling and Use Information
(Section VIII).
PRIMARY ROUTE(S) OF ENTRY: DERMAL INHALATION INGESTION
EMERGENCY AND FIRST AID PROCEDURES:
Inhalation - Remove from hazard area, maintain breathing, call physician.
Skin Contact - Remove with soap and water.
Eye Contact - Flush immediately with large amounts of water. Call physician.
Ingestion - Drink 1 or 2 glasses of water to dilute. Do NOT induce vomiting.
Call physician.
================================================================================
SECTION VI - REACTIVITY DATA
================================================================================
STABILITY: STABLE HAZARDOUS POLYMERIZATION WILL NOT OCCUR
HAZARDOUS DECOMPOSITION PRODUCTS: Burning may produce carbon dioxide and carbon
monoxide.
CONDITIONS TO AVOID: Elevated temperatures and build up of vapors.
http://www.benjaminmoore.com/msds/MSDS/071.html 12/31/98
MSDS for 071 IronClad Quick Dry Industrial Enamel Page 3 of 3
INCOMPATIBILITY (MATERIALS TO AVOID): None reasonably foreseeable.
================================================================================
SECTION VII - SPILL OR LEAK PROCEDURES
================================================================================
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Remove all sources
of ignition. Avoid breathing vapors. Use non-sparking tools to return
materials to container. Absorb residue with Fuller's earth.
WASTE DISPOSAL METHOD: Conventional procedures in compliance with local, state
and federal regulations. Do not incinerate sealed containers.
================================================================================
SECTION VIII - SAFE HANDLING AND USE INFORMATION
================================================================================
RESPIRATORY PROTECTION: Wear a properly fitted vapor/particulate approved by
NIOSH/MSHA for use with paints (TC-23C) during application or sanding and until
all vapors and spray mist are exhausted. In confined spaces or in situations
where continuous sprayoperations are typical, or if proper respirator fit is
not possible, wear a positive-pressure, supplied air respirator (NIOSH/MSHA
TC-19C)
VENTILATION: Adequate to maintain working atmosphere below T.L.V. and L.E.L.
(See Sect. II for ingredient data and concentrations). Mechanical exhaust may
be required in confined areas. Discharge exhaust only in area away from
ignition sources.
PROTECTIVE GLOVES: Solvent impermeable gloves are required.
EYE PROTECTION: Splash goggles or safety glasses with side shields.
OTHER PROTECTIVE EQUIPMENT: Clothing adequate to protect skin.
HYGIENIC PRACTICES: Remove and wash clothing before reuse. Wash hands before
eating, smoking or using the washroom.
================================================================================
SECTION IX - SPECIAL PRECAUTIONS
================================================================================
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Combustible - Keep away from
heat and flame.
OTHER PRECAUTIONS: Use only with adequate ventilation. Avoid prolonged
contact with skin and breathing of vapor spray mist or sanding dust. Close
container after each use. Keep out of reach of children. Do not take
internally.
http://www.benjaminmoore.com/msds/MSDS/071.html 12/31/98
|