Material Safety Data Sheet
Phoenix 27-A Water Dispersible Pipe Joint Lubricant Date of Preparation: August 2001
Section 1 - Chemical Product and Company Identification
Product/Chemical Name: Phoenix 27-A Water Dispersible Pipe Joint Lubricant
Chemical Formula: 88-6
Manufacturer: JTM Products, Inc., 9505 Cassius Avenue, Cleveland, OH 44105, Phone (216) 341-2212, FAX (216) 341-2214
(CHEM-TEL 24-hour emergency: (800) 255-3924)
Section 2 - Composition / Information on Ingredients
Blend of soap and non-toxic ingredients to lower freezing point.
Section 3 - Hazards Identification
HMIS
露 露 露 露 露 Emergency Overview 露 露 露 露 露 H 1
F 0
Potential Health Effects R 0
Primary Entry Routes: Not Hazardous 鈥?
PPE
Carcinogenicity: IARC, NTP, and OSHA do not list the ingredients in Phoenix 27-A Water Dispersible Pipe Joint 鈥? Sec. 8
Lubricant as carcinogens.
Section 4 - First Aid Measures
Eye Contact: Flush with copious volumes of water for 15 minutes while holding eyelids open.
Skin Contact: Wash with water.
If irritation persists, call a physician.
Section 5 - Fire-Fighting Measures
NFPA
Flash Point: >220 掳F (>104 掳C) LEL: NA
Flash Point Method: NA, contains water UEL: NA
0
Autoignition Temperature: NA Flammability Classification: 0
0
1
Extinguishing Media: Water, water fog, alcohol foam, carbon dioxide or dry chemical are all suitable.
鈥?
Unusual Fire or Explosion Hazards: None
Hazardous Combustion Products: None
Fire-Fighting Instructions: Do not release runoff from fire control methods to sewers or waterways.
Fire-Fighting Equipment: Because fire may produce toxic thermal decomposition products, wear a self-contained breathing
apparatus (SCBA) with a full facepiece operated in pressure-demand or positive-pressure mode.
Section 6 - Accidental Release Measures
Spill /Leak Procedures: This product is a biodegradable soap.
Containment: For large spills, dike far ahead of spill for later disposal.
Cleanup: Place the bulk of any spilled material into drums, then rinse any remaining material to sewage treatment facility, in
accordance with any applicable regulations.
Regulatory Requirements: Follow applicable OSHA regulations (29 CFR 1910.120).
Section 7 - Handling and Storage
Handling Precautions: No special precautions are required.
Storage Requirements: No special precautions are required.
Regulatory Requirements: No known regulatory requirement for handling and storage.
Section 8 - Exposure Controls / Personal Protection
Engineering Controls:
Ventilation: Provide general or local exhaust ventilation systems.
Administrative Controls:
Respiratory Protection: If respirators are used, OSHA requires a written respiratory protection program that includes at least:
medical certification, training, fit-testing, periodic environmental monitoring, maintenance, inspection, cleaning, and convenient,
sanitary storage areas.
Page 1 of 2
Phoenix 27-A Water Dispersible Pipe Joint Lubricant
Protective Clothing/Equipment: Wear chemically protective gloves to prevent prolonged or repeated skin contact. Wear
protective eyeglasses or chemical safety goggles, per OSHA eye- and face-protection regulations (29 CFR 1910.133). Contact
lenses are not eye protective devices. Appropriate eye protection must be worn instead of, or in conjunction with contact lenses.
Safety Stations: Make emergency eyewash stations, safety/quick-drench showers, and washing facilities available in work area.
Contaminated Equipment: Launder before reuse. Remove this material from your shoes and clean personal protective equipment.
Comments: Never eat, drink, or smoke in work areas. Practice good personal hygiene after using this material, especially before
eating, drinking, smoking, using the toilet, or applying cosmetics.
Section 9 - Physical and Chemical Properties
Physical State: Paste Water Solubility: complete solubility in water
Appearance and Odor: amber paste, bland odor Boiling Point: >220 掳F
Odor Threshold: NA Freezing/Melting Point: <32 掳F
Vapor Pressure: NA Viscosity: viscous paste
Vapor Density (Air=1): NA Refractive Index: unknown
Formula Weight: NA (blend) Surface Tension: unknown
Density: 8.3 lbs./gal. % Volatile: 55
Specific Gravity (H2 O=1, at 4 掳C): 1.0 Evaporation Rate: NA
pH: 11
Section 10 - Stability and Reactivity
Stability: Phoenix 27-A Water Dispersible Pipe Joint Lubricant is stable at room temperature in closed containers under normal
storage and handling conditions.
Polymerization: Hazardous polymerization will not occur.
Chemical Incompatibilities:
Conditions to Avoid: Reactive alloys such as aluminum, brass, bronze. Also avoid contact with strong oxidizing agents.
Hazardous Decomposition Products: Thermal oxidative decomposition of Phoenix 27-A Water Dispersible Pipe Joint Lubricant
can produce oxides of carbon and nitrogen.
Section 11- Toxicological Information
Toxicity Data:
Eye Effects: Eye irritant.
Skin Effects: Slight skin irritant if allowed to remain in contact.
Section 12 - Ecological Information
Ecotoxicity:
Environmental Fate
Environmental Transport: Unknown.
Environmental Degradation: Soaps are well known to be biodegradable.
Soil Absorption/Mobility: Unknown.
Section 13 - Disposal Considerations
Disposal: Contact your supplier or a licensed contractor for detailed recommendations. Follow applicable Federal, state, and local
regulations.
Section 14 - Transport Information
Not hazardous under DOT regulations.
Section 15 - Regulatory Information
EPA Regulations: None apply.
Section 16 - Other Information
Prepared By: J. Vavrik Approved By: J. Cahoon
Disclaimer: JTM PRODUCTS, INC. makes no warranty, expressed or implied, as to the accuracy, completeness, or reliability of
information contained herein, except that such information is, to the best of JTM鈥檚 knowledge and belief, accurate as of the date
indicated. It is for the purchaser and/or user to decide whether this information is suitable for his purposes.
Page 2 of 2
|