+-------------------------------------------------------+
| MATERIAL SAFETY DATA SHEET |
+-------------------------------------------------------+
+-------------------------------------------------------------------------+
| SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
+-------------------------------------------------------------------------+
PRODUCT NAME : WHITE MULTI-PURPOSE-PART A
IDENTIFICATION NUMBER: 00022-499 A
DATE PRINTED : 08/30/00
PRODUCT USE/CLASS : EPOXI SHIELD FLOOR COAT.-ACTIV
SUPPLIER: MANUFACTURER:
Rust-Oleum Corporation Manufactured for Rust-Oleum at:
11 Hawthorn Parkway Rust-Oleum-Epoxi Tech
Vernon Hills, Illinois 32700 Industrial Drive
60061 USA Madison Heights, MI 48071
(847) 367-7700 Rust-Oleum Corp. EMRG.PHONE:(847)367-7700 (R-O)
8:00 AM-4:30 PM/24-hr Emer.Assist 8:00AM-4:30PMCTS(24hr.Emer.Assis)
PREPARER: L.J.W., PHONE: 847-816-2445, PREPARE DATE: 08/30/00
+-------------------------------------------------------------------------+
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS |
+-------------------------------------------------------------------------+
WT/WT %
ITEM ------------ CHEMICAL NAME ------------- CAS NUMBER LESS THAN
---------------------------------------------------------------------------
01 Ethylene Glycol Monopropyl Ether 2807-30-9 10.0 %
---------------------- EXPOSURE LIMITS --------------------
ACGIH OSHA MEXICAN
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
---------------------------------------------------------------------------
01 N.E. N.E. N.E. N.E. N.E. NO
(See Section 16 for abbreviation legend)
+-------------------------------------------------------------------------+
| SECTION 3 - HAZARDS IDENTIFICATION |
+-------------------------------------------------------------------------+
*** EMERGENCY OVERVIEW ***: Harmful if inhaled. Causes eye irritation.
Causes skin irritation.
EFFECTS OF OVEREXPOSURE - EYE CONTACT: Causes eye irritation.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: Causes skin irritation. Allergic
reactions are possible. May cause skin sensitization, an allergic
reaction, which becomes
evident on reexposure to this material.
(Continued on Page 2)
---------------------------------------------------------------------------
Product: 00022-499 A Preparation Date: 08/30/00 Page 2
+-------------------------------------------------------------------------+
| SECTION 3 - HAZARDS IDENTIFICATION |
+-------------------------------------------------------------------------+
EFFECTS OF OVEREXPOSURE - INHALATION: High gas, vapor, mist or dust
concentrations may be harmful if inhaled. Prolonged or excessive
inhalation may cause respiratory tract irritation.
EFFECTS OF OVEREXPOSURE - INGESTION: Substance may be harmful if
swallowed.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Reports have associated
repeated and prolonged occupational overexposure to solvents with permanent
brain and nervous system damage.
PRIMARY ROUTE(S) OF ENTRY: INHALATION
+-------------------------------------------------------------------------+
| SECTION 4 - FIRST AID MEASURES |
+-------------------------------------------------------------------------+
FIRST AID - EYE CONTACT: Hold eyelids apart and flush with plenty of water
for at lease 15 minutes. Get medical attention.
FIRST AID - SKIN CONTACT: Wash with soap and water. Get medical attention
if irritation develops or persists.
FIRST AID - INHALATION: If you experience difficulty in breathing, leave
the area to obtain fresh air. If continued difficulty is experienced, get
medical assistance immediately.
FIRST AID - INGESTION: If swallowed, do not induce vomiting. Give victim
a glass of water or milk. Call a physician or poison control center
immediately. Never give anything by mouth to an unconscious person.
+-------------------------------------------------------------------------+
| SECTION 5 - FIRE FIGHTING MEASURES |
+-------------------------------------------------------------------------+
FLASH POINT: N.A. LOWER EXPLOSIVE LIMIT: N.A.
UPPER EXPLOSIVE LIMIT: N.A.
AUTOIGNITION TEMPERATURE: N.D.
EXTINGUISHING MEDIA: DRY CHEMICAL FOAM WATER FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS: Closed containers may explode when
exposed to extreme heat due to buildup of steam. Isolate from heat,
electrical equipment, sparks and open flame. FLASH POINT IS TESTED TO BE
GREATER THAN 212 DEGREES F (>100 DEGREES C).
SPECIAL FIREFIGHTING PROCEDURES: Evacuate area and fight fire from a safe
distance.
(Continued on Page 3)
---------------------------------------------------------------------------
Product: 00022-499 A Preparation Date: 08/30/00 Page 3
+-------------------------------------------------------------------------+
| SECTION 6 - ACCIDENTAL RELEASE MEASURES |
+-------------------------------------------------------------------------+
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Dispose of
according to local, state (provincial) and federal regulations. Do not
incinerate closed containers.
+-------------------------------------------------------------------------+
| SECTION 7 - HANDLING AND STORAGE |
+-------------------------------------------------------------------------+
HANDLING: Wash thoroughly after handling. Wash hands before eating.
Remove contaminated clothing and launder before reuse. Use only in a
well-ventilated area. Use with adequate ventilation. Avoid prolonged or
repeated contact with skin.
STORAGE: Keep containers tightly closed. Isolate from heat, electrical
equipment, sparks and open flame. Keep container closed when not in use.
+-------------------------------------------------------------------------+
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
+-------------------------------------------------------------------------+
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation,
or other engineering controls to control airborne levels below recommended
exposure limits. Prevent build-up of vapors by opening all doors and
windows to achieve cross-ventilation.
RESPIRATORY PROTECTION: A NIOSH/MSHA approved air purifying respirator
with an organic vapor cartridge or canister may be permissible under
certain circumstances where airborne concentrations are expected to exceed
exposure limits. Protection provided by air purifying respirators
is limited. Use a positive pressure air supplied respirator if there is
any potential for an uncontrolled release, exposure levels are not known,
or any other circumstances where air purifying respirators may not provide
adequate protection.
SKIN PROTECTION: Use impervious gloves to prevent skin contact and
absorption of this material through the skin. Nitrile or Neoprene gloves
may afford adequate skin protection.
EYE PROTECTION: Use safety eyewear designed to protect against splash of
liquids.
OTHER PROTECTIVE EQUIPMENT: Refer to safety supervisor or industrial
hygienist for further guidance on types of personal protective equipment
and their applications.
HYGIENIC PRACTICES: Wash thoroughly with soap and water before eating,
drinking or smoking. Remove contaminated clothing immediately and launder
before reuse.
(Continued on Page 4)
---------------------------------------------------------------------------
Product: 00022-499 A Preparation Date: 08/30/00 Page 4
+-------------------------------------------------------------------------+
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
+-------------------------------------------------------------------------+
BOILING RANGE : 212 - 245 F VAPOR DENSITY : Is heavier than air
ODOR : AMMONICAL ODOR THRESHOLD : N.D.
APPEARANCE : PIGMENTED LIQUID EVAPORATION RATE: Is slower than Ether
SOLUBILITY IN H2O : SOLUBLE
FREEZE POINT : N.D. SPECIFIC GRAVITY: 1.0672
VAPOR PRESSURE : < 20 mmHg pH @ 0.0 % : N.D.
PHYSICAL STATE : LIQUID VISCOSITY : N.D.
COEFFICIENT OF WATER/OIL DISTRIBUTION: N.D.
(See Section 16 for abbreviation legend)
+-------------------------------------------------------------------------+
| SECTION 10 - STABILITY AND REACTIVITY |
+-------------------------------------------------------------------------+
CONDITIONS TO AVOID: Avoid contact with strong acid and strong bases.
INCOMPATIBILITY: Incompatible with strong oxidizing agents, strong acids
and strong alkalies.
HAZARDOUS DECOMPOSITION PRODUCTS: By open flame, carbon monoxide and
carbon dioxide. When heated to decomposition it emits acrid smoke and
irritating fumes.
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
+-------------------------------------------------------------------------+
| SECTION 11 - TOXICOLOGICAL PROPERTIES |
+-------------------------------------------------------------------------+
COMPONENT TOXICOLOGICAL INFORMATION:
----------- CHEMICAL NAME ----------- ------ LD50 ------ ------ LC50 ------
Ethylene Glycol Monopropyl Ether 3 g/Kg rat 2132 ppm/6hr/rat
+-------------------------------------------------------------------------+
| SECTION 12 - ECOLOGICAL INFORMATION |
+-------------------------------------------------------------------------+
ECOLOGICAL INFORMATION: Product is a mixture of listed components.
According to our raw material suppliers, all components are listed on the
TSCA Inventory as required or meet the polymer exemption as defined in
Section 5.5.2 of the Toxic Substances Control Act.
+-------------------------------------------------------------------------+
| SECTION 13 - DISPOSAL CONSIDERATIONS |
+-------------------------------------------------------------------------+
DISPOSAL METHOD: Dispose of material in accordance to local, state and
federal regulations and ordinances. Do not allow to enter storm drains or
(Continued on Page 5)
---------------------------------------------------------------------------
Product: 00022-499 A Preparation Date: 08/30/00 Page 5
+-------------------------------------------------------------------------+
| SECTION 13 - DISPOSAL CONSIDERATIONS |
+-------------------------------------------------------------------------+
sewer systems.
+-------------------------------------------------------------------------+
| SECTION 14 - TRANSPORTATION INFORMATION |
+-------------------------------------------------------------------------+
DOT PROPER SHIPPING NAME: PAINT
DOT TECHNICAL NAME:
DOT HAZARD CLASS: HAZARD SUBCLASS:
DOT UN/NA NUMBER: PACKING GROUP: RESP. GUIDE PAGE:
+-------------------------------------------------------------------------+
| SECTION 15 - REGULATORY INFORMATION |
+-------------------------------------------------------------------------+
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
CERCLA - SARA HAZARD CATEGORY:
This product has been reviewed according to the EPA 'Hazard Categories'
promulgated under Sections 311 and 312 of the Superfund Amendment and
Reauthorization Act of 1986 (SARA Title III) and is considered, under
applicable definitions, to meet the following categories:
None
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
----------- CHEMICAL NAME ----------- CAS NUMBER WT/WT % IS LESS THAN
No SARA Section 313 components exist in this product above de minimis levels.
U.S. STATE REGULATIONS: AS FOLLOWS -
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:
----------- CHEMICAL NAME ----------- CAS NUMBER
EPOXY RESIN NOT AVAILABLE
Water 7732-18-5
WATER DEIONIZED 7732-18-5
Magnesium Aluminum Silicate 12174-11-7
(Continued on Page 6)
---------------------------------------------------------------------------
Product: 00022-499 A Preparation Date: 08/30/00 Page 6
+-------------------------------------------------------------------------+
| SECTION 15 - REGULATORY INFORMATION |
+-------------------------------------------------------------------------+
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at
greater than 3%:
----------- CHEMICAL NAME ----------- CAS NUMBER
EPOXY RESIN NOT AVAILABLE
Water 7732-18-5
WATER DEIONIZED 7732-18-5
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are
known to the state of California to cause cancer, birth defects or other
reproductive harm:
----------- CHEMICAL NAME ----------- CAS NUMBER
According to our raw material suppliers no Proposition 65 chemicals exist
in this product above OSHA de minimus levels. All products comply with
label provisions of Proposition 65.
INTERNATIONAL REGULATIONS: AS FOLLOWS -
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: D2B
+-------------------------------------------------------------------------+
| SECTION 16 - OTHER INFORMATION |
+-------------------------------------------------------------------------+
HMIS RATINGS - HEALTH: 2* FLAMMABILITY: 1 REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: 07/25/00
LEGEND: N.A. - Not Applicable, N.E. - Not Established,
N.D. - Not Determined
: No Information.
---------------------------------------------------------------------------
The information contained on this MSDS has been checked and should be
accurate. However, it is the responsibility of the user to comply with all
Federal, State, and Local laws and regulations.
---------------------------------------------------------------------------
+-------------------------------------------------------+
| MATERIAL SAFETY DATA SHEET |
+-------------------------------------------------------+
+-------------------------------------------------------------------------+
| SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
+-------------------------------------------------------------------------+
PRODUCT NAME : WHITE MULTI-PURPOSE -PART B
IDENTIFICATION NUMBER: 00022-499 B
DATE PRINTED : 08/30/00
PRODUCT USE/CLASS : EPOXI SHIELD FLOOR COAT.-BASE
SUPPLIER: MANUFACTURER:
Rust-Oleum Corporation Manufactured for Rust-Oleum at:
11 Hawthorn Parkway Rust-Oleum-Epoxi Tech
Vernon Hills, Illinois 32700 Industrial Drive
60061 USA Madison Heights, MI 48071
(847) 367-7700 Rust-Oleum Corp. EMRG.PHONE:(847)367-7700 (R-O)
8:00 AM-4:30 PM/24-hr Emer.Assist 8:00AM-4:30PMCTS(24hr.Emer.Assis)
PREPARER: L.J.W., PHONE: 847-816-2445, PREPARE DATE: 08/30/00
+-------------------------------------------------------------------------+
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS |
+-------------------------------------------------------------------------+
WT/WT %
ITEM ------------ CHEMICAL NAME ------------- CAS NUMBER LESS THAN
---------------------------------------------------------------------------
01 DIETHYLENE GLYCOL METHYL ETHER 111-77-3 5.0 %
02 ESTER ALCOHOL 25265-77-4 5.0 %
---------------------- EXPOSURE LIMITS --------------------
ACGIH OSHA MEXICAN
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
---------------------------------------------------------------------------
01 N.E. N.E. N.E. N.E. N.E. YES
02 N.E. N.E. N.E. N.E. N.E. NO
(See Section 16 for abbreviation legend)
+-------------------------------------------------------------------------+
| SECTION 3 - HAZARDS IDENTIFICATION |
+-------------------------------------------------------------------------+
*** EMERGENCY OVERVIEW ***: Causes eye irritation. Use ventilation
necessary to keep exposures below recommended
exposure limits, if any.
EFFECTS OF OVEREXPOSURE - EYE CONTACT: Causes eye irritation.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: May cause skin irritation.
(Continued on Page 2)
---------------------------------------------------------------------------
Product: 00022-499 B Preparation Date: 08/30/00 Page 2
+-------------------------------------------------------------------------+
| SECTION 3 - HAZARDS IDENTIFICATION |
+-------------------------------------------------------------------------+
EFFECTS OF OVEREXPOSURE - INHALATION: Low hazard for usual industrial
handling or commercial handling by trained personnel.
EFFECTS OF OVEREXPOSURE - INGESTION: Substance may be harmful if
swallowed.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: Effects of overexposure may
include irritation of the nose and throat, irritation of the digestive
tract and signs of nervous system depression (e.g., headache, drowsiness,
loss of coordination and fatigue.
PRIMARY ROUTE(S) OF ENTRY: INHALATION EYE CONTACT
+-------------------------------------------------------------------------+
| SECTION 4 - FIRST AID MEASURES |
+-------------------------------------------------------------------------+
FIRST AID - EYE CONTACT: Hold eyelids apart and flush with plenty of water
for at lease 15 minutes. Get medical attention.
FIRST AID - SKIN CONTACT: Wash with soap and water. Get medical attention
if irritation develops or persists.
FIRST AID - INHALATION: Remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen. Get
immediate medical attention.
FIRST AID - INGESTION: Swallowing less than an ounce will not cause
significant harm. For larger amounts, do not induce vomiting, but give one
or two glasses of water to drink and get medical attention.
+-------------------------------------------------------------------------+
| SECTION 5 - FIRE FIGHTING MEASURES |
+-------------------------------------------------------------------------+
FLASH POINT: N.A. LOWER EXPLOSIVE LIMIT: 0.6 %
UPPER EXPLOSIVE LIMIT: 22.7 %
AUTOIGNITION TEMPERATURE: N.D.
EXTINGUISHING MEDIA: DRY CHEMICAL FOAM WATER FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS: FLASH POINT IS TESTED TO BE GREATER
THAN 212 DEGREES F (>100 DEGREES C).
SPECIAL FIREFIGHTING PROCEDURES: Water may be used to cool closed
containers to prevent buildup of steam.
(Continued on Page 3)
---------------------------------------------------------------------------
Product: 00022-499 B Preparation Date: 08/30/00 Page 3
+-------------------------------------------------------------------------+
| SECTION 6 - ACCIDENTAL RELEASE MEASURES |
+-------------------------------------------------------------------------+
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Dispose of
according to local, state (provincial) and federal regulations. Do not
incinerate closed containers.
+-------------------------------------------------------------------------+
| SECTION 7 - HANDLING AND STORAGE |
+-------------------------------------------------------------------------+
HANDLING: Wash thoroughly after handling. Wash hands before eating.
Avoid contact with eyes.
STORAGE: Keep from freezing. Keep container closed when not in use.
+-------------------------------------------------------------------------+
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
+-------------------------------------------------------------------------+
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation,
or other engineering controls to control airborne levels below recommended
exposure limits. Prevent build-up of vapors by opening all doors and
windows to achieve cross-ventilation.
RESPIRATORY PROTECTION: A respiratory protection program that meets OSHA
1910.134 and ANSI Z88.2 requirements must be followed whenever workplace
conditions warrant a respirator's use.
SKIN PROTECTION: Use gloves to prevent prolonged skin contact. Nitrile or
Neoprene gloves may afford adequate skin protection.
EYE PROTECTION: Use safety eyewear designed to protect against splash of
liquids.
OTHER PROTECTIVE EQUIPMENT: Refer to safety supervisor or industrial
hygienist for further information regarding personal protective equipment
and its application.
HYGIENIC PRACTICES: Wash thoroughly with soap and water before eating,
drinking or smoking.
+-------------------------------------------------------------------------+
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
+-------------------------------------------------------------------------+
BOILING RANGE : 381 - 471 F VAPOR DENSITY : Is heavier than air
ODOR : AMMONICAL ODOR THRESHOLD : N.D.
APPEARANCE : LIQUID EVAPORATION RATE: Is slower than Ether
SOLUBILITY IN H2O : SOLUBLE
FREEZE POINT : N.D. SPECIFIC GRAVITY: 1.2600
VAPOR PRESSURE : 17 mmHg@20 C pH @ 0.0 % : N.D.
PHYSICAL STATE : LIQUID VISCOSITY : N.D.
COEFFICIENT OF WATER/OIL DISTRIBUTION: N.D.
(Continued on Page 4)
---------------------------------------------------------------------------
Product: 00022-499 B Preparation Date: 08/30/00 Page 4
+-------------------------------------------------------------------------+
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
+-------------------------------------------------------------------------+
(See Section 16 for abbreviation legend)
+-------------------------------------------------------------------------+
| SECTION 10 - STABILITY AND REACTIVITY |
+-------------------------------------------------------------------------+
CONDITIONS TO AVOID: Avoid contact with strong acid and strong bases.
INCOMPATIBILITY: Incompatible with strong oxidizing agents, strong acids
and strong alkalies.
HAZARDOUS DECOMPOSITION PRODUCTS: By open flame, carbon monoxide and
carbon dioxide. When heated to decomposition it emits acrid smoke and
irritating fumes.
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
+-------------------------------------------------------------------------+
| SECTION 11 - TOXICOLOGICAL PROPERTIES |
+-------------------------------------------------------------------------+
COMPONENT TOXICOLOGICAL INFORMATION:
----------- CHEMICAL NAME ----------- ------ LD50 ------ ------ LC50 ------
DIETHYLENE GLYCOL METHYL ETHER RAT 5500MG/KG N.E.
ESTER ALCOHOL RAT 6.86ML/KG RAT >2.75MG/L 6HR
+-------------------------------------------------------------------------+
| SECTION 12 - ECOLOGICAL INFORMATION |
+-------------------------------------------------------------------------+
ECOLOGICAL INFORMATION: Product is a mixture of listed components.
According to our raw material suppliers, all components are listed on the
TSCA Inventory as required or meet the polymer exemption as defined in
Section 5.5.2 of the Toxic Substances Control Act.
+-------------------------------------------------------------------------+
| SECTION 13 - DISPOSAL CONSIDERATIONS |
+-------------------------------------------------------------------------+
DISPOSAL METHOD: Dispose of material in accordance to local, state and
federal regulations and ordinances. Do not allow to enter storm drains or
sewer systems.
+-------------------------------------------------------------------------+
| SECTION 14 - TRANSPORTATION INFORMATION |
+-------------------------------------------------------------------------+
DOT PROPER SHIPPING NAME: PAINT
(Continued on Page 5)
---------------------------------------------------------------------------
Product: 00022-499 B Preparation Date: 08/30/00 Page 5
+-------------------------------------------------------------------------+
| SECTION 14 - TRANSPORTATION INFORMATION |
+-------------------------------------------------------------------------+
DOT TECHNICAL NAME:
DOT HAZARD CLASS: HAZARD SUBCLASS:
DOT UN/NA NUMBER: PACKING GROUP: RESP. GUIDE PAGE:
+-------------------------------------------------------------------------+
| SECTION 15 - REGULATORY INFORMATION |
+-------------------------------------------------------------------------+
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
CERCLA - SARA HAZARD CATEGORY:
This product has been reviewed according to the EPA 'Hazard Categories'
promulgated under Sections 311 and 312 of the Superfund Amendment and
Reauthorization Act of 1986 (SARA Title III) and is considered, under
applicable definitions, to meet the following categories:
CHRONIC HEALTH HAZARD FIRE HAZARD
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
----------- CHEMICAL NAME ----------- CAS NUMBER WT/WT % IS LESS THAN
DIETHYLENE GLYCOL METHYL ETHER 111-77-3 5.0 %
U.S. STATE REGULATIONS: AS FOLLOWS -
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:
----------- CHEMICAL NAME ----------- CAS NUMBER
Water 7732-18-5
TITANIUM DIOXIDE 13463-67-7
EMULSION NOT AVAILABLE
WATER DEIONIZED 7732-18-5
NEPHELINE SYENITE 37244-96-5
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at
greater than 3%:
----------- CHEMICAL NAME ----------- CAS NUMBER
Water 7732-18-5
TITANIUM DIOXIDE 13463-67-7
EMULSION NOT AVAILABLE
(Continued on Page 6)
---------------------------------------------------------------------------
Product: 00022-499 B Preparation Date: 08/30/00 Page 6
+-------------------------------------------------------------------------+
| SECTION 15 - REGULATORY INFORMATION |
+-------------------------------------------------------------------------+
----------- CHEMICAL NAME ----------- CAS NUMBER
WATER DEIONIZED 7732-18-5
NEPHELINE SYENITE 37244-96-5
Aluminum Silicate 1332-58-7
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are
known to the state of California to cause cancer, birth defects or other
reproductive harm:
----------- CHEMICAL NAME ----------- CAS NUMBER
According to our raw material suppliers no Proposition 65 chemicals exist
in this product above OSHA de minimus levels. All products comply with
label provisions of Proposition 65.
INTERNATIONAL REGULATIONS: AS FOLLOWS -
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: D2B
+-------------------------------------------------------------------------+
| SECTION 16 - OTHER INFORMATION |
+-------------------------------------------------------------------------+
HMIS RATINGS - HEALTH: 2* FLAMMABILITY: 1 REACTIVITY: 0
PREVIOUS MSDS REVISION DATE: 07/25/00
LEGEND: N.A. - Not Applicable, N.E. - Not Established,
N.D. - Not Determined
: No Information.
---------------------------------------------------------------------------
The information contained on this MSDS has been checked and should be
accurate. However, it is the responsibility of the user to comply with all
Federal, State, and Local laws and regulations.
---------------------------------------------------------------------------
|