M. E. Taylor Engineering, Inc.
15817 Crabbs Branch Way
Rockville, MD 20855
Material Safety Data Sheet
Revision Date Technical Information
February 4th, 2005 1-301-975-9798 or support@semicro.org
Head Office Emergency
21604 Gentry Lane, Brookeville, MD, 20833 Phone Canutech (613) 996-6666 Collect 24 hrs
For updates please download from www.semicro.org or phone 1-301-975-9798
Section 1: Product Identification
MSDS Code: SE 鈥? Part A Name: Epoxy 鈥? Electrically Conductive Adhesive
Related Part Numbers: SE; SE-B
Use: Electrically conductive adhesive.
Section 2: Hazardous Ingredients
CAS# Chemical Name % by weight ACGIH TWA Osha Pel Osha Stel
28064-14-4 reaction product of epichlorohydrin 30 鈥? 50 n/e n/e n/e
and bisphenol F
0.01mg/m3 0.01mg/m3
7440-22-4 silver 50 鈥? 70 n/e
Section 3: Hazards Identification
WHMIS Codes: B3, D2B
NFPA Ratings: Health 2 Flammability 1 Reactivity 0
HMIS Ratings: Health 2 Flammability 1 Reactivity 0
Eyes: Causes irritation.
Skin: Prolonged exposure may cause skin irritation. May cause allergic reaction in some individuals.
Inhalation: At room temperature, exposure to vapors is unlikely due to physical property of low volatility. Higher temperatures may
generate vapor levels sufficient to cause irritation to the respiratory tract (nose, throat, and lungs).
Ingestion: Single dose oral toxicity is low. Amounts ingested incidental to industrial handling are not likely to cause injury; however,
ingestion of large amounts may be harmful.
Chronic: Chronic inhalation or ingestion of silver salts may cause argyria characterized by a permanent blue-gray discoloration of
the eyes, skin, mucous membranes, and internal organs. Inhalation and/or of fumes may cause metal fume fever, which
is characterized by flu-like symptoms with metallic taste, fever, chills, cough, weakness, chest pain, muscle pain and
increased white blood cell count
Section 4: First Aid Measure
Eyes: Remove contact lenses if worn. Flush with water or saline for 20 minutes, occasionally lifting the upper and lower
eyelids. Get medical aid.
Skin: Thoroughly wash skin with soap. Remove contaminated clothing and wash before reuse. Solvents should not be used to
clean hands or skin because they increase the penetration of the material into the skin. Get medical aid if symptoms
persist.
Inhalation: Immediately remove from exposure to fresh air. Get medical aid if symptoms persist.
Ingestion: Do not induce vomiting. If conscious, give 1-2 glasses of water. Get medical aid.
___________________________________________________________________________________
PAGE 1 / 4
M. E. Taylor Engineering, Inc.
15817 Crabbs Branch Way
Rockville, MD 20855
Section 5: Fire Fighting Measures
Autoignition Temperature: n/e Flash Point: n/e LEL / UEL: n/e
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
General Information: n/a
Section 6: Accidental Release Measures
Spill Remove all sources of ignition. Provide adequate ventilation. Wear appropriate personal protection. Wipe up with paper
Procedure: towel and place in container. Wash spill area with soap and water.
Section 7: Handling and Storage
Handling: Avoid contact with eyes, skin, and clothing. Wash hands thoroughly after handling. Do not ingest or inhale. Do not
expose container to heat or flame.
Storage: Keep away from sources of ignition. Store closed container in a cool, dry, and well ventilated area away from
incompatible substances.
Section 8: Exposure Controls
Routes of entry: Eyes, ingestion, inhalation, and skin.
Ventilation: Use adequate general or local exhaust ventilation to keep airborne concentrations below exposure limits.
Personal Wear appropriate protective eyeglasses or chemical safety goggles. Wear appropriate protective clothing to
Protection: prevent skin contact. Use a NIOSH approved respirator when necessary.
Section 9: Physical and Chemical Properties
Physical: liquid Odor: slightly aromatic Solubility: none Evaporation Rate: n/e
State:
Boiling n/e Specific 2.47 Vapor n/e Vapor >1 pH: n/a
Point: Gravity: Pressure: Density: (Air=1)
Section 10: Stability and Reactivity
Stability: Stable at normal temperatures and pressures.
Conditions to avoid: n/a
Incompatibilities: Avoid strong oxidizing agents, mineral acids, ethyleneimine, and strong mineral and organic bases.
Polymerization: Will undergo hazardous polymerization at elevated temperatures.
Decomposition: Carbon dioxide, carbon monoxide, hydrocarbons and silver fumes.
Section 11: Toxicological Information
Sensitization: (effects of repeated exposure) This product is a skin sensitizer.
___________________________________________________________________________________
PAGE 2/ 4
M. E. Taylor Engineering, Inc.
15817 Crabbs Branch Way
Rockville, MD 20855
Carcinogenicity: (risk of cancer) This material does not contain 0.1% or more of any chemical listed by
IARC, NTP, or OSHA as a carcinogen.
Teratogenicity: (risk of malformation in No
an unborn fetus)
Reproductive Toxicity: (risk of sterility) No
Mutangenicity: (risk of heritable genetic No
effects)
Lethal Exposure Ingestion (LD50): n/e Inhalation (LC50): n/e Skin (LD50): n/e
Concentrations:
Section 12: Ecological Information
General Avoid runoff into storms and sewers which lead into waterways. Water runoff can cause
Information: environmental damage.
Environmental Impact Data: (percentage by weight)
CFC: 0 HFC: 0 Cl.Solv.: 0 VOC: 0 HCFC: 0 ODP: 0
Section 13: Disposal Information
General Dispose of in accordance with all local, provincial, state, and federal regulations. Water runoff
Information: can cause environmental damage.
Section 14: Transportation Information
Ground:
Non-regulated
Air:
Non-regulated
Sea:
Non-regulated
Section 15: Regulatory Information
This product has been classified in accordance with the hazard criteria of the Controlled Products
Regulations and the MSDS contains all of the information required by the Controlled Products Regulations.
SARA (Superfund Amendments and Reauthorization Act of 1986, USA, 40 CFR 372.4)
None of the chemicals in this product have a reportable quantity.
EPCRA (Emergency Planning and Right to Know Act, USA, 40 CFR 372.45)
This product does not contain any chemicals subject to the reporting requirements of section 313 Title III of the
SARA of 1986 and 40 CFR part 372.
TSCA (Toxic Substances Control Act of 1976, USA)
All substances are TSCA listed.
___________________________________________________________________________________
PAGE 3/ 4
M. E. Taylor Engineering, Inc.
15817 Crabbs Branch Way
Rockville, MD 20855
Section 15: Regulatory Information Cont.
CAA (Clean Air Act, USA)
This product does not contain any class 1 ozone depletors.
This product does not contain any class 2 ozone depletors.
This product does not contain any chemicals listed as hazardous air pollutants.
California Proposition 65 (Chemicals know to cause cancer or reproductive toxicity, May 1, 1997 revision, USA)
This product does not contain any chemicals listed.
Health Canada
Labeling and containers used in this product are listed in compliance with Consumer Chemicals and Container regulations.
Environment Canada
Chemicals in this product are listed on the Domestic Substances List in the Canadian Environmental Protection Act
This product does not contain any ozone depleting substances.
Industry and Science Canada
Labeling, product identity, net quantity declaration, minimum printing type size heights, and packaging of this product is in
compliance with the Consumer Packaging and Labeling Act and Regulations. This product is not slack filled in accordance to
chapter 4 prohibitions.
RoHS (The restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2004).
This product is RoHS compliant.
Section 16: Other Information
Definitions: n/a = not applicable, n/e = not established
Disclaimer: This material safety data sheet is provided as an information resource only. M. E. Taylor Engineering believes the
information contained herein is accurate and compiled from reliable sources. It is the responsibility of the user to verify its
validity. The buyer assumes all responsibility of using and handling the product in accordance with federal, state, and
local regulations.
___________________________________________________________________________________
PAGE 4/ 4
|