MATERIAL SAFETY DATA SHEET
SikaFast 3141
HMIS
HEALTH *2
FLAMMABILITY 3
REACTIVITY 2
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
30800 Stephenson Highway 30800 Stephenson Highway
Madison Heights, MI 48071 U.S.A. Madison Heights, MI 48071 U.S.A.
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikaindustry.com Web Site: www.sikaindustry.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 07/01/2004
Product Name: SikaFast 3141
CAS Number: Not Established
Chemical Family: Methacrylate Ester
MSDS Number: 3263
Product Code: 3141550
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
METHYL METHACRYLATE 80-62-6 50 - 60
XYLENE (MIXED ISOMERS) 1330-20-7 0.5 - 2.5
3. Hazards Identification
Eye Hazards
Causes eye irritation.
Skin Hazards
May cause skin irritation. Prolonged and/or repeated skin contact may cause an allergic reaction/sensitization.
Ingestion Hazards
Harmful if swallowed.
Inhalation Hazards
May cause nose, throat, and lung irritation. May cause an allergic respiratory reaction / sensitization after
prolonged or repeated contact. Reports have associated repeated and prolonged exposure to some of the
Page 1 of 6
MATERIAL SAFETY DATA SHEET
SikaFast 3141
3. Hazards Identification - Continued
Inhalation Hazards - Continued
chemicals in this product with permanent brain, liver, kidney, and Central Nervous System (CNS) damage.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration.
5. Fire Fighting Measures
Flash Point: <55 掳F <12.7 掳C
Flash Point Method: ASTM D-93
Lower Explosive Limit: N/AV
Upper Explosive Limit: N/AV
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Eliminate all ignition sources. Use appropriate Personal Protective Equipment (PPE). Absorb and/or contain spill with
inert materials (e.g. sand, vermiculite) and then place in appropriate container. For large spills, use water spray to
disperse vapors. Prevent runoff from entering waterways or sewers.
7. Handling And Storage
Handling And Storage Precautions
Keep containers tightly closed. Keep out of reach of children. Not for internal consumption.
Handling Precautions
Avoid breathing vapor. Keep away from heat, sparks, flame, and other sources of ignition (i.e., pilot lights, electric
motors, and static electricity).
Storage Precautions
Keep away from heat, sparks, flame, and other sources of ignition (i.e., pilot lights, electric motors and static
electricity). Store in a cool dry place at temperatures between 40 - 72 F in original sealed containers.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
No Data Available...
Page 2 of 6
MATERIAL SAFETY DATA SHEET
SikaFast 3141
8. Exposure Controls/Personal Protection - Continued
Engineering Controls
Use of a system of local and/or general exhaust is recommended to keep employee below applicable expsoure
limits. Refer to the current edition of "Industrial Ventilation: A Manual of Recommended Practice" published by
the American Conference of Governmental Industrial Hygienists for information on the design, installation, use,
and maintenance of exhaust systems.
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Exposure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Ingredient(s) - Exposure Limits
METHYL METHACRYLATE
ACGIH TLV-STEL 100 ppm (Proposed)
ACGIH TLV-TWA 100 ppm (Notice of Intended Change)
ACGIH TLV-TWA 50 ppm (Proposed)
OSHA PEL-TWA 100 ppm
XYLENE (MIXED ISOMERS)
ACGIH TLV-STEL 150 ppm
ACGIH TLV-TWA 100 ppm
OSHA PEL-TWA 100 ppm
9. Physical And Chemical Properties
Appearance
Light straw, white paste
Odor
Characteristic odor
Chemical Type: Mixture
Physical State: Liquid
Specific Gravity: 1.00 +/- 0.1
Percent Volatiles: 5.0 - 6.0
VOC Content: 52 grams / liter
VOC Content measured as curing adhesive in closed bead.
10. Stability And Reactivity
Stability: Unstable with heat
Hazardous Polymerization: Will not occur
Incompatible Materials
Oxidizing and reducing agents
Hazardous Decomposition Products
CO, CO2
Page 3 of 6
MATERIAL SAFETY DATA SHEET
SikaFast 3141
10. Stability And Reactivity - Continued
Conditions To Avoid (Polymerization)
Hazardous polymerization may occur upon depletion of inhibitor. May cause heat and pressure build-up in closed
containers
11. Toxicological Information
Conditions Aggravated By Exposure
Eye disease, skin disorders and allergies, chronic respiratory conditions.
Ingredient(s) - Carginogenicity
METHYL METHACRYLATE
Listed In The IARC Monographs
12. Ecological Information
No Data Available...
13. Disposal Considerations
Waste generators must determine whether a discarded material is classified as a hazardous waste. USEPA guidelines
for the classification determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state
and local hazardous waste regulations to ensure complete and accurate classification. Dispose in accordance with
applicable federal, state and local government regulations.
RCRA Information
Waste solutions may meet the RCRA Ignitable characteristic.
14. Transport Information
Proper Shipping Name
Adhesives, containing a flammable liquid
Hazard Class
3, PG II
DOT Identification Number
UN1133
DOT Shipping Label
Flammable Liquid
Additional Information
The information above pertains to 5 gallon and 55 gallon containers only.
490 ml cartridges, please refer to 49 CFR 173.150.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
SARA Title III - Section 313 Supplier Notification
This product contains the following toxic chemicals that are subject to the reporting requirements of section 313 of
the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and of 40 CFR 372.
Page 4 of 6
MATERIAL SAFETY DATA SHEET
SikaFast 3141
15. Regulatory Information - Continued
SARA Title III - Section 313 Supplier Notification - Continued
METHYL METHACRYLATE (80-62-6) 50 - 60 %
XYLENE (MIXED ISOMERS) (1330-20-7) 0.5 - 2.5 %
This information must be included on all MSDSs that are copied and distributed for this material.
Ingredient(s) - U.S. Regulatory Information
METHYL METHACRYLATE
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
SARA - Acute Health Hazard
SARA - Chronic Health Hazard
SARA - Fire Hazard
XYLENE (MIXED ISOMERS)
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
SARA - Acute Health Hazard
SARA - Chronic Health Hazard
SARA - Fire Hazard
Ingredient(s) - State Regulations
METHYL METHACRYLATE
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Pennsylvania - Environmental Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
XYLENE (MIXED ISOMERS)
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Pennsylvania - Environmental Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
16. Other Information
HMIS Rating
Health: *2
F i re : 3
Reactivity: 2
PP E: C
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201 933 8800
This MSDS Supercedes A Previous MSDS Dated: 07/01/2004
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Page 5 of 6
MATERIAL SAFETY DATA SHEET
SikaFast 3141
Disclaimer - Continued
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
Sika Corp.
Printed Using MSDS Generator鈩? 2000
Page 6 of 6
|