SECTION 3 - PHYSICAL DATA AND CHEMICAL PROPERTIES
Semi-Solid
Form:
Dark Brown
Colour:
Petroleum
Odour:
o
0.95
Specific Gravity @ 15 C:
0
Volatiles (wt%):
Insoluble
Solubility in Water:
SECTION 4 - FIRE AND EXPLOSION HAZARD
Flammability: 鈱es Open flame above flash point.
No Conditions:
o
Flash Point : 175 C (COC)
Not applicable. Not applicable.
Upper Flammable Limit: Lower Flammable Limit:
Not applicable. Not classified.
Auto Ignition Temperature: TDG Flammability Classification:
Not applicable. Not applicable.
Sensitivity to Impact: Sensitivity to Static Discharge:
Water fog, Carbon dioxide, dry chemical, foam, earth or sand. Water may cause frothing.
Means of Extinction:
Carbon monoxide and carbon dioxide.
Hazardous Combustion Products:
Wear self-contained breathing apparatus when fighting fire. Use water to cool fire-exposed
Special Procedures:
containers.
SECTION 5 - REACTIVITY DATA
This product is stable.
Stability:
Will not occur.
Hazardous Polymerisation:
Excessive heat or open flame.
Conditions to avoid:
Strong oxidising agents.
Incompatibility with other substances:
Not determined.
Hazardous decomposition products:
Irritation to skin and eyes.
Effects of Acute Exposure:
Not determined.
Effects of Chronic Exposure:
Not determined. Not determined.
Exposure Limits: Carcinogenicity:
Not determined. Not determined.
Reproductive Toxicity: Teratogenicity:
Slight. Not determined.
Irritancy of Product: Mutagenicity:
The information contained in this form is based on data from sources considered to be reliable but Irving Oil Limited does not guarantee the accuracy or completeness thereof. The
information is provided as a service to the persons purchasing or using the material to which it refers and Irving Oil Limited expressly disclaims all liability for loss or damage including
consequential loss or for injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
Limited
weartex.DOC
Page 1 of 2
MATERIAL SAFETY DATA SHEET
SECTION 7 - PREVENTATIVE AND CORRECTIVE MEASURES
Gloves: Oil/Chemical resistant.
Personal Protective Equipment:
Eye: Chemical safety glasses or full face shield.
Respiratory: None normally required.
Footwear: None normally required.
Clothing: None normally required.
Other:
None normally required.
Engineering Controls:
Absorb with sand or inert material. Sweep or scoop to remove.
Leak and Spill Procedure:
Consult local authorities.
Waste Disposal:
Keep container closed, in a cool, dry area.
Storage Requirements
None.
Special Shipping Information:
SECTION 8 - FIRST AID MEASURES
Not applicable.
Inhalation:
Do not induce vomiting, seek medical attention.
Ingestion:
Flush with water for 15 minutes.
Eye:
Clean area exposed with soap and water.
Skin:
General Advice:
SECTION 9 - PREPARATION DATE OF MSDS
Irving Lubricants (506) 632-7000
MSDS Prepared by: Phone:
MSDS Date: February 14, 2007
Revision 02
The information contained in this form is based on data from sources considered to be reliable but Irving Oil Limited does not guarantee the accuracy or completeness thereof. The
information is provided as a service to the persons purchasing or using the material to which it refers and Irving Oil Limited expressly disclaims all liability for loss or damage including
consequential loss or for injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
Limited
weartex.DOC
Page 2 of 2
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP