Search   
MSDS 
:
 Cresyl Violet Acetate (Cert)
CAS 
:
 10510-54-0
SYNONYMS 
:
 CVA
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10510-54-0 |Cresyl Violet Acetate | 100 | 234-043-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and respiratory system.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 10510-54-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: light to dark green
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 140-143 deg C
Autoignition Temperature: Not available.
Flash Point: > 146 deg C (> 294.80 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: 146 deg C
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C18H14N3O3
Molecular Weight: 320.32

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 10510-54-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Cresyl Violet Acetate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37 Irritating to eyes and respiratory system.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 10510-54-0: 1
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 10510-54-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10510-54-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/07/1998 Revision #2 Date: 5/14/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
O,n-dimethylhydroxylamine hydrochloride, 98% 6638-79-5
Dl-mandelic acid, 99+% 611-72-3
Trans, Trans-2,4-Decadienal, Tech., 95%. 25152-84-5
Phenanthrene, 90% 85-01-8
N-(Propargyloxy)phthalimide, 98% 4616-63-1
Tetra-normal-butyltin, 96% 1461-25-2
Oxindole, 97+% (TLC) 59-48-3
Water, Demineralized 7732-18-5
Polyethyleneglycol 200 Monooctylether 27252-75-1
Cyclopropyl methyl ketone, 98% 765-43-5
Aniline Blue, certified biological stain 28631-66-5
Barbital Sodium 144-02-5
1,2,3,5-Tetrafluorobenzene, 99+% 2367-82-0
1-Chloro-9,10-bis(phenylethynyl)anthracene 41105-35-5
2-Chloroethyl isocyanate, 98% 1943-83-5
Brilliant Green 633-03-4
2-Methoxyphenylisocyanate, 99% 700-87-8
n-Methyl-o-toluamide, 99% 2170-09-4
1-Bromo-3,4-Dichlorobenzene, 98+% 18282-59-2
L(-)-Malic Acid,30 Wt% Aqueous Solution 97-67-6
Bromothymol Blue 76-59-5
Thallium (I) Nitrate, 99.5% 10102-45-1
Bromophenol Blue 115-39-9
Diethylene glycol dibutyl ether, 98% 112-73-2
D-Glutamic Acid, 99+% 6893-26-1
Bromophenol Blue Sodium Salt, Reagent ACS 62625-28-9
Blue Tetrazolium, Recrystallized 1871-22-3
4-Nitrobenzenesulfonyl Fluoride, 99% (HPLC) 349-96-2
Bromocresol Green 76-60-8
Tetraphenylarsonium chloride hydro- chloride, 95% (titr.) 21006-73-5
Acetone Oxime, 98% 127-06-0
Cresyl Violet Acetate (Cert) 10510-54-0
Hematein, 94% (uv-vis) 475-25-2
Poly(isobutylene), approximate MW 400,000 9003-27-4
Congo Red 573-58-0
DL-alpha-Methylbenzylamine, 99% 618-36-0
Allyl Trifluoroacetate 383-67-5
2-(2,4,5-Trichlorophenoxy)-propionic acid, 97% 93-72-1
2,6-Dichloroindophenol Sodium Salt 620-45-1
Eosin Y 17372-87-1
4-Nitrobenzoyl Azide 2733-41-7
Eosin b, spirit soluble 56360-46-4
Acetone sodium bisulfite, 97%(titr.) 540-92-1
Eriochrome Black T, Indicator Grade 1787-61-7
2-Nitrophenylacetonitrile, 98% 610-66-2
Ir-132, laser grade, 99% (uv-vis) 51010-97-0
Evans Blue Certified 314-13-6
Fast Green FCF 2353-45-9
Giemsa Stain 51811-82-6
7-Hydroxyquinoline, 99% 580-20-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net