Search   
MSDS 
:
 Brilliant Green
CAS 
:
 633-03-4
SYNONYMS 
:
 C.I. 42040; Malachite Green G; Ethyl Green; Emerald Green; Diamond     Green G; Fast Green J; Solid Green
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 633-03-4 |C.I. Basic Green 1 | ca. 100 | 211-190-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Hygroscopic (absorbs moisture from the air).

Potential Health Effects
Eye:
This product contains a cationic dye. Similar dyes have caused
permanent injury to the cornea and conjunctiva in documented
exposure cases with human or rabbit eyes.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. SPEEDY ACTION IS CRITICAL!
Skin:
Get medical aid if irritation develops or persists. Wash clothing
before reuse. Flush skin with plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use alcohol foam, carbon dioxide, or water spray when fighting fires
involving this material.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Remove all sources of
ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Keep container tightly closed. Do not
ingest or inhale. Wash clothing before reuse.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 633-03-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: yellow-green to green
Odor: odorless
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Decomposes.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 210 deg C
Solubility in water: Moderately soluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: C27H33N2.HSO4
Molecular Weight: 385.2444

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 633-03-4: BP6825000
LD50/LC50:
Not available.
Carcinogenicity:
C.I. Basic Green 1 -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 633-03-4: 2
Canada
CAS# 633-03-4 is listed on Canada's DSL List.
CAS# 633-03-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 633-03-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/08/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
O,n-dimethylhydroxylamine hydrochloride, 98% 6638-79-5
Dl-mandelic acid, 99+% 611-72-3
Trans, Trans-2,4-Decadienal, Tech., 95%. 25152-84-5
Phenanthrene, 90% 85-01-8
N-(Propargyloxy)phthalimide, 98% 4616-63-1
Tetra-normal-butyltin, 96% 1461-25-2
Oxindole, 97+% (TLC) 59-48-3
Water, Demineralized 7732-18-5
Polyethyleneglycol 200 Monooctylether 27252-75-1
Cyclopropyl methyl ketone, 98% 765-43-5
Aniline Blue, certified biological stain 28631-66-5
Barbital Sodium 144-02-5
1,2,3,5-Tetrafluorobenzene, 99+% 2367-82-0
1-Chloro-9,10-bis(phenylethynyl)anthracene 41105-35-5
2-Chloroethyl isocyanate, 98% 1943-83-5
Brilliant Green 633-03-4
2-Methoxyphenylisocyanate, 99% 700-87-8
n-Methyl-o-toluamide, 99% 2170-09-4
1-Bromo-3,4-Dichlorobenzene, 98+% 18282-59-2
L(-)-Malic Acid,30 Wt% Aqueous Solution 97-67-6
Bromothymol Blue 76-59-5
Thallium (I) Nitrate, 99.5% 10102-45-1
Bromophenol Blue 115-39-9
Diethylene glycol dibutyl ether, 98% 112-73-2
D-Glutamic Acid, 99+% 6893-26-1
Bromophenol Blue Sodium Salt, Reagent ACS 62625-28-9
Blue Tetrazolium, Recrystallized 1871-22-3
4-Nitrobenzenesulfonyl Fluoride, 99% (HPLC) 349-96-2
Bromocresol Green 76-60-8
Tetraphenylarsonium chloride hydro- chloride, 95% (titr.) 21006-73-5
Acetone Oxime, 98% 127-06-0
Cresyl Violet Acetate (Cert) 10510-54-0
Hematein, 94% (uv-vis) 475-25-2
Poly(isobutylene), approximate MW 400,000 9003-27-4
Congo Red 573-58-0
DL-alpha-Methylbenzylamine, 99% 618-36-0
Allyl Trifluoroacetate 383-67-5
2-(2,4,5-Trichlorophenoxy)-propionic acid, 97% 93-72-1
2,6-Dichloroindophenol Sodium Salt 620-45-1
Eosin Y 17372-87-1
4-Nitrobenzoyl Azide 2733-41-7
Eosin b, spirit soluble 56360-46-4
Acetone sodium bisulfite, 97%(titr.) 540-92-1
Eriochrome Black T, Indicator Grade 1787-61-7
2-Nitrophenylacetonitrile, 98% 610-66-2
Ir-132, laser grade, 99% (uv-vis) 51010-97-0
Evans Blue Certified 314-13-6
Fast Green FCF 2353-45-9
Giemsa Stain 51811-82-6
7-Hydroxyquinoline, 99% 580-20-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net