Search   
MSDS 
:
 DL-alpha-Methylbenzylamine, 99%
CAS 
:
 618-36-0
SYNONYMS 
:
 DL-alpha-Phenylethylamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 618-36-0 |DL-alpha-Methylbenzylamine | 99 | 210-545-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 21/22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed. Causes
burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Harmful if absorbed through the skin. Causes skin burns. May cause
cyanosis of the extremities. May cause skin rash (in milder cases),
and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May be harmful if swallowed. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause systemic effects. Inhalation at high
concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Do not breathe
dust, vapor, mist, or gas. Do not get in eyes, on skin, or on
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Do not ingest or inhale. Discard
contaminated shoes. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 618-36-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear colorless
Odor: none reported
pH: Not available.
Vapor Pressure: 0.5 mm Hg @ 20 deg C
Viscosity: Not available.
Boiling Point: 185 deg C @ 756 mmHg
Freezing/Melting Point: -65 deg C
Autoignition Temperature: Not applicable.
Flash Point: 79 deg C ( 174.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 4.2% (20C)
Specific Gravity/Density: 0.9500g/cm3
Molecular Formula: C8H11N
Molecular Weight: 121.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Absorbs carbon
dioxide from the air.
Conditions to Avoid:
Incompatible materials, ignition sources, acids, excess heat.
Incompatibilities with Other Materials:
Acids, acid anhydrides, acid chlorides, strong oxidizing agents,
carbon dioxide.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 618-36-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
DL-alpha-Methylbenzylamine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 21/22 Harmful in contact with skin and if
swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 618-36-0: 1
Canada
CAS# 618-36-0 is listed on Canada's DSL List.
CAS# 618-36-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 618-36-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/18/1998 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
O,n-dimethylhydroxylamine hydrochloride, 98% 6638-79-5
Dl-mandelic acid, 99+% 611-72-3
Trans, Trans-2,4-Decadienal, Tech., 95%. 25152-84-5
Phenanthrene, 90% 85-01-8
N-(Propargyloxy)phthalimide, 98% 4616-63-1
Tetra-normal-butyltin, 96% 1461-25-2
Oxindole, 97+% (TLC) 59-48-3
Water, Demineralized 7732-18-5
Polyethyleneglycol 200 Monooctylether 27252-75-1
Cyclopropyl methyl ketone, 98% 765-43-5
Aniline Blue, certified biological stain 28631-66-5
Barbital Sodium 144-02-5
1,2,3,5-Tetrafluorobenzene, 99+% 2367-82-0
1-Chloro-9,10-bis(phenylethynyl)anthracene 41105-35-5
2-Chloroethyl isocyanate, 98% 1943-83-5
Brilliant Green 633-03-4
2-Methoxyphenylisocyanate, 99% 700-87-8
n-Methyl-o-toluamide, 99% 2170-09-4
1-Bromo-3,4-Dichlorobenzene, 98+% 18282-59-2
L(-)-Malic Acid,30 Wt% Aqueous Solution 97-67-6
Bromothymol Blue 76-59-5
Thallium (I) Nitrate, 99.5% 10102-45-1
Bromophenol Blue 115-39-9
Diethylene glycol dibutyl ether, 98% 112-73-2
D-Glutamic Acid, 99+% 6893-26-1
Bromophenol Blue Sodium Salt, Reagent ACS 62625-28-9
Blue Tetrazolium, Recrystallized 1871-22-3
4-Nitrobenzenesulfonyl Fluoride, 99% (HPLC) 349-96-2
Bromocresol Green 76-60-8
Tetraphenylarsonium chloride hydro- chloride, 95% (titr.) 21006-73-5
Acetone Oxime, 98% 127-06-0
Cresyl Violet Acetate (Cert) 10510-54-0
Hematein, 94% (uv-vis) 475-25-2
Poly(isobutylene), approximate MW 400,000 9003-27-4
Congo Red 573-58-0
DL-alpha-Methylbenzylamine, 99% 618-36-0
Allyl Trifluoroacetate 383-67-5
2-(2,4,5-Trichlorophenoxy)-propionic acid, 97% 93-72-1
2,6-Dichloroindophenol Sodium Salt 620-45-1
Eosin Y 17372-87-1
4-Nitrobenzoyl Azide 2733-41-7
Eosin b, spirit soluble 56360-46-4
Acetone sodium bisulfite, 97%(titr.) 540-92-1
Eriochrome Black T, Indicator Grade 1787-61-7
2-Nitrophenylacetonitrile, 98% 610-66-2
Ir-132, laser grade, 99% (uv-vis) 51010-97-0
Evans Blue Certified 314-13-6
Fast Green FCF 2353-45-9
Giemsa Stain 51811-82-6
7-Hydroxyquinoline, 99% 580-20-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net