**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 28631-66-5 |C.I. Acid Blue 22 | 100 | 249-113-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation. This product contains an anionic dye.
Similar dyes have not caused injury to the cornea or conjunctiva in
documented exposure cases with human or rabbit eyes.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Low hazard for usual industrial handling.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual
industrial handling.
Chronic:
Prolonged or repeated skin contact may cause irritation. May cause
methemoglobinemia, which is characterized by chocolate-brown colored
blood, headache, weakness, dizziness, breath shortness, cyanosis
(bluish skin due to deficient oxygenation of blood), rapid heart
rate, unconsciousness and possible death.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Wash clothing
before reuse. Flush skin with plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
breathing dust.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 28631-66-5:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: dark purple
Odor: odorless
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: Not available.
Molecular Formula: C32H25N3O9S3Na2
Molecular Weight: 737.76
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 28631-66-5: DB4958000
LD50/LC50:
Not available.
Carcinogenicity:
C.I. Acid Blue 22 -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 28631-66-5: No information available.
Canada
CAS# 28631-66-5 is listed on Canada's DSL List.
CAS# 28631-66-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 28631-66-5 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 12/12/1997 Revision #4 Date: 3/04/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
O,n-dimethylhydroxylamine hydrochloride, 98%
| 6638-79-5 |
|
Dl-mandelic acid, 99+%
| 611-72-3 |
|
Trans, Trans-2,4-Decadienal, Tech., 95%.
| 25152-84-5 |
|
Phenanthrene, 90%
| 85-01-8 |
|
N-(Propargyloxy)phthalimide, 98%
| 4616-63-1 |
|
Tetra-normal-butyltin, 96%
| 1461-25-2 |
|
Oxindole, 97+% (TLC)
| 59-48-3 |
|
Water, Demineralized
| 7732-18-5 |
|
Polyethyleneglycol 200 Monooctylether
| 27252-75-1 |
|
Cyclopropyl methyl ketone, 98%
| 765-43-5 |
|
Aniline Blue, certified biological stain
| 28631-66-5 |
|
Barbital Sodium
| 144-02-5 |
|
1,2,3,5-Tetrafluorobenzene, 99+%
| 2367-82-0 |
|
1-Chloro-9,10-bis(phenylethynyl)anthracene
| 41105-35-5 |
|
2-Chloroethyl isocyanate, 98%
| 1943-83-5 |
|
Brilliant Green
| 633-03-4 |
|
2-Methoxyphenylisocyanate, 99%
| 700-87-8 |
|
n-Methyl-o-toluamide, 99%
| 2170-09-4 |
|
1-Bromo-3,4-Dichlorobenzene, 98+%
| 18282-59-2 |
|
L(-)-Malic Acid,30 Wt% Aqueous Solution
| 97-67-6 |
|
Bromothymol Blue
| 76-59-5 |
|
Thallium (I) Nitrate, 99.5%
| 10102-45-1 |
|
Bromophenol Blue
| 115-39-9 |
|
Diethylene glycol dibutyl ether, 98%
| 112-73-2 |
|
D-Glutamic Acid, 99+%
| 6893-26-1 |
|
Bromophenol Blue Sodium Salt, Reagent ACS
| 62625-28-9 |
|
Blue Tetrazolium, Recrystallized
| 1871-22-3 |
|
4-Nitrobenzenesulfonyl Fluoride, 99% (HPLC)
| 349-96-2 |
|
Bromocresol Green
| 76-60-8 |
|
Tetraphenylarsonium chloride hydro- chloride, 95% (titr.)
| 21006-73-5 |
|
Acetone Oxime, 98%
| 127-06-0 |
|
Cresyl Violet Acetate (Cert)
| 10510-54-0 |
|
Hematein, 94% (uv-vis)
| 475-25-2 |
|
Poly(isobutylene), approximate MW 400,000
| 9003-27-4 |
|
Congo Red
| 573-58-0 |
|
DL-alpha-Methylbenzylamine, 99%
| 618-36-0 |
|
Allyl Trifluoroacetate
| 383-67-5 |
|
2-(2,4,5-Trichlorophenoxy)-propionic acid, 97%
| 93-72-1 |
|
2,6-Dichloroindophenol Sodium Salt
| 620-45-1 |
|
Eosin Y
| 17372-87-1 |
|
4-Nitrobenzoyl Azide
| 2733-41-7 |
|
Eosin b, spirit soluble
| 56360-46-4 |
|
Acetone sodium bisulfite, 97%(titr.)
| 540-92-1 |
|
Eriochrome Black T, Indicator Grade
| 1787-61-7 |
|
2-Nitrophenylacetonitrile, 98%
| 610-66-2 |
|
Ir-132, laser grade, 99% (uv-vis)
| 51010-97-0 |
|
Evans Blue Certified
| 314-13-6 |
|
Fast Green FCF
| 2353-45-9 |
|
Giemsa Stain
| 51811-82-6 |
|
7-Hydroxyquinoline, 99%
| 580-20-1 |
|
|