**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 540-92-1 |Acetone sodium bisulfite | 97 | 208-761-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Avoid ingestion and
inhalation. Use with adequate ventilation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.)
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 540-92-1:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: Not available.
Odor: sulfurous odor - weak odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: freely soluble
Specific Gravity/Density:
Molecular Formula: C3H7NaO4S
Molecular Weight: 162.14
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, acids.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 540-92-1: TZ6550000
LD50/LC50:
Not available.
Carcinogenicity:
Acetone sodium bisulfite -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 540-92-1: No information available.
Canada
CAS# 540-92-1 is listed on Canada's NDSL List.
CAS# 540-92-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 540-92-1 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 10/16/1998 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
O,n-dimethylhydroxylamine hydrochloride, 98%
| 6638-79-5 |
|
Dl-mandelic acid, 99+%
| 611-72-3 |
|
Trans, Trans-2,4-Decadienal, Tech., 95%.
| 25152-84-5 |
|
Phenanthrene, 90%
| 85-01-8 |
|
N-(Propargyloxy)phthalimide, 98%
| 4616-63-1 |
|
Tetra-normal-butyltin, 96%
| 1461-25-2 |
|
Oxindole, 97+% (TLC)
| 59-48-3 |
|
Water, Demineralized
| 7732-18-5 |
|
Polyethyleneglycol 200 Monooctylether
| 27252-75-1 |
|
Cyclopropyl methyl ketone, 98%
| 765-43-5 |
|
Aniline Blue, certified biological stain
| 28631-66-5 |
|
Barbital Sodium
| 144-02-5 |
|
1,2,3,5-Tetrafluorobenzene, 99+%
| 2367-82-0 |
|
1-Chloro-9,10-bis(phenylethynyl)anthracene
| 41105-35-5 |
|
2-Chloroethyl isocyanate, 98%
| 1943-83-5 |
|
Brilliant Green
| 633-03-4 |
|
2-Methoxyphenylisocyanate, 99%
| 700-87-8 |
|
n-Methyl-o-toluamide, 99%
| 2170-09-4 |
|
1-Bromo-3,4-Dichlorobenzene, 98+%
| 18282-59-2 |
|
L(-)-Malic Acid,30 Wt% Aqueous Solution
| 97-67-6 |
|
Bromothymol Blue
| 76-59-5 |
|
Thallium (I) Nitrate, 99.5%
| 10102-45-1 |
|
Bromophenol Blue
| 115-39-9 |
|
Diethylene glycol dibutyl ether, 98%
| 112-73-2 |
|
D-Glutamic Acid, 99+%
| 6893-26-1 |
|
Bromophenol Blue Sodium Salt, Reagent ACS
| 62625-28-9 |
|
Blue Tetrazolium, Recrystallized
| 1871-22-3 |
|
4-Nitrobenzenesulfonyl Fluoride, 99% (HPLC)
| 349-96-2 |
|
Bromocresol Green
| 76-60-8 |
|
Tetraphenylarsonium chloride hydro- chloride, 95% (titr.)
| 21006-73-5 |
|
Acetone Oxime, 98%
| 127-06-0 |
|
Cresyl Violet Acetate (Cert)
| 10510-54-0 |
|
Hematein, 94% (uv-vis)
| 475-25-2 |
|
Poly(isobutylene), approximate MW 400,000
| 9003-27-4 |
|
Congo Red
| 573-58-0 |
|
DL-alpha-Methylbenzylamine, 99%
| 618-36-0 |
|
Allyl Trifluoroacetate
| 383-67-5 |
|
2-(2,4,5-Trichlorophenoxy)-propionic acid, 97%
| 93-72-1 |
|
2,6-Dichloroindophenol Sodium Salt
| 620-45-1 |
|
Eosin Y
| 17372-87-1 |
|
4-Nitrobenzoyl Azide
| 2733-41-7 |
|
Eosin b, spirit soluble
| 56360-46-4 |
|
Acetone sodium bisulfite, 97%(titr.)
| 540-92-1 |
|
Eriochrome Black T, Indicator Grade
| 1787-61-7 |
|
2-Nitrophenylacetonitrile, 98%
| 610-66-2 |
|
Ir-132, laser grade, 99% (uv-vis)
| 51010-97-0 |
|
Evans Blue Certified
| 314-13-6 |
|
Fast Green FCF
| 2353-45-9 |
|
Giemsa Stain
| 51811-82-6 |
|
7-Hydroxyquinoline, 99%
| 580-20-1 |
|
|