Search   
MSDS 
:
 2-Chloroethyl isocyanate, 98%
CAS 
:
 1943-83-5
SYNONYMS 
:
 Ethane, 1-chloro-2-isocyanato-; Isocyanic acid, 2-chloroethyl ester
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1943-83-5 |2-Chloroethyl isocyanate | 98 | 217-734-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if swallowed.
Irritating to eyes, respiratory system and skin.Moisture
sensitive.Lachrymator (substance which increases the flow of tears).

Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the
flow of tears). May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin irritation. Exposure may cause dermatitis and
sensitization. Substance is readily absorbed through the skin. May
cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Ingestion of large amounts may cause CNS depression.
Inhalation:
Causes respiratory tract irritation. Inhalation may be fatal as a
result of spasm, inflammation, edema of the larynx and bronchi,
chemical pneumonitis and pulmonary edema. Vapors may cause dizziness
or suffocation. May cause burning sensation, coughing, wheezing,
laryngitis, shortness of breath, headache, nausea, and vomiting. May
cause respiratory sensitization.
Chronic:
Repeated exposure may cause allergic respiratory reaction (asthma).
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be
ineffective. Use carbon dioxide or dry chemical. Do NOT get water
inside containers. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Remove all sources of ignition. Absorb spill using
an absorbent, non-combustible material such as earth, sand, or
vermiculite. Do not use combustible materials such as sawdust. Use a
spark-proof tool. Provide ventilation. Do not get water inside
containers. A vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Do not get in eyes,
on skin, or on clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Do not ingest or
inhale. Do not allow contact with water. Wash clothing before reuse.
Do not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames. Keep from contact
with moist air and steam. Do not breathe vapor.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Refrigerator/flammables. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low. Use
adequate general or local explosion-proof ventilation to keep
airborne levels to acceptable levels.
Exposure Limits
CAS# 1943-83-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 135 deg C @ 760.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 56 deg C ( 132.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: May decompose.
Specific Gravity/Density: 1.2200g/cm3
Molecular Formula: C3H4ClNO
Molecular Weight: 105.52

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat.
Incompatibilities with Other Materials:
Moisture, heat, water, alcohols, amines, strong bases, strong
oxidizing agents, acids.
Hazardous Decomposition Products:
Hydrogen chloride, hydrogen cyanide, nitrogen oxides, carbon
monoxide, carbon dioxide, chloride fumes.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1943-83-5: NQ8450000
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
2-Chloroethyl isocyanate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ISOCYANATES, TOXIC, FLAMMABLE, N.O.S.*
Hazard Class: 6.1 (3)
UN Number: 3080
Packing Group: II
IMO
Shipping Name: ISOCYANATES, TOXIC, FLAMMABLE, N.O.S.
Hazard Class: 6.1 (3)
UN Number: 3080
Packing Group: II
RID/ADR
Shipping Name: ISOCYANATES, TOXIC, FLAMMABLE, N.O.S.
Hazard Class: 6.1
UN Number: 3080
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 1943-83-5: No information available.
Canada
CAS# 1943-83-5 is listed on Canada's DSL List.
CAS# 1943-83-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1943-83-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #8 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
O,n-dimethylhydroxylamine hydrochloride, 98% 6638-79-5
Dl-mandelic acid, 99+% 611-72-3
Trans, Trans-2,4-Decadienal, Tech., 95%. 25152-84-5
Phenanthrene, 90% 85-01-8
N-(Propargyloxy)phthalimide, 98% 4616-63-1
Tetra-normal-butyltin, 96% 1461-25-2
Oxindole, 97+% (TLC) 59-48-3
Water, Demineralized 7732-18-5
Polyethyleneglycol 200 Monooctylether 27252-75-1
Cyclopropyl methyl ketone, 98% 765-43-5
Aniline Blue, certified biological stain 28631-66-5
Barbital Sodium 144-02-5
1,2,3,5-Tetrafluorobenzene, 99+% 2367-82-0
1-Chloro-9,10-bis(phenylethynyl)anthracene 41105-35-5
2-Chloroethyl isocyanate, 98% 1943-83-5
Brilliant Green 633-03-4
2-Methoxyphenylisocyanate, 99% 700-87-8
n-Methyl-o-toluamide, 99% 2170-09-4
1-Bromo-3,4-Dichlorobenzene, 98+% 18282-59-2
L(-)-Malic Acid,30 Wt% Aqueous Solution 97-67-6
Bromothymol Blue 76-59-5
Thallium (I) Nitrate, 99.5% 10102-45-1
Bromophenol Blue 115-39-9
Diethylene glycol dibutyl ether, 98% 112-73-2
D-Glutamic Acid, 99+% 6893-26-1
Bromophenol Blue Sodium Salt, Reagent ACS 62625-28-9
Blue Tetrazolium, Recrystallized 1871-22-3
4-Nitrobenzenesulfonyl Fluoride, 99% (HPLC) 349-96-2
Bromocresol Green 76-60-8
Tetraphenylarsonium chloride hydro- chloride, 95% (titr.) 21006-73-5
Acetone Oxime, 98% 127-06-0
Cresyl Violet Acetate (Cert) 10510-54-0
Hematein, 94% (uv-vis) 475-25-2
Poly(isobutylene), approximate MW 400,000 9003-27-4
Congo Red 573-58-0
DL-alpha-Methylbenzylamine, 99% 618-36-0
Allyl Trifluoroacetate 383-67-5
2-(2,4,5-Trichlorophenoxy)-propionic acid, 97% 93-72-1
2,6-Dichloroindophenol Sodium Salt 620-45-1
Eosin Y 17372-87-1
4-Nitrobenzoyl Azide 2733-41-7
Eosin b, spirit soluble 56360-46-4
Acetone sodium bisulfite, 97%(titr.) 540-92-1
Eriochrome Black T, Indicator Grade 1787-61-7
2-Nitrophenylacetonitrile, 98% 610-66-2
Ir-132, laser grade, 99% (uv-vis) 51010-97-0
Evans Blue Certified 314-13-6
Fast Green FCF 2353-45-9
Giemsa Stain 51811-82-6
7-Hydroxyquinoline, 99% 580-20-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net