**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 112-73-2 |Diethylene glycol dibutyl ether | 98 | 204-001-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be absorbed through the skin.
Ingestion:
May cause digestive tract disturbances.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Containers
may explode when heated. This liquid floats on water and may travel
to a source of ignition and spread fire.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Avoid ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Storage under a nitrogen blanket has been
recommended.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 112-73-2:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: almost colorless
Odor: characteristic odor
pH: Not available.
Vapor Pressure: < 0.01 mm Hg @ 20 deg C
Viscosity: 2.39 cP 20 deg C
Boiling Point: 256 deg C @ 760 mmHg
Freezing/Melting Point: -60 deg C
Autoignition Temperature: 310 deg C ( 590.00 deg F)
Flash Point: 101 deg C ( 213.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 0.3% @ 20C
Specific Gravity/Density: .8800g/cm3
Molecular Formula: C12H26O3
Molecular Weight: 218.34
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Absorbs carbon
dioxide from the air. May decompose violently on contact with nitric
acid.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, copper, copper alloys.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, acrid smoke and fumes.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 112-73-2: KN0350000
LD50/LC50:
CAS# 112-73-2: Oral, rat: LD50 = 3900 mg/kg; Skin, rabbit: LD50 =
4040 uL/kg.
Carcinogenicity:
Diethylene glycol dibutyl ether -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Other
No information available.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not Regulated
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not Regulated
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not Regulated
Hazard Class: 3
UN Number:
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 112-73-2: No information available.
Canada
CAS# 112-73-2 is listed on Canada's DSL List.
CAS# 112-73-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 112-73-2 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 12/30/1998 Revision #6 Date: 3/04/2004
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
O,n-dimethylhydroxylamine hydrochloride, 98%
| 6638-79-5 |
|
Dl-mandelic acid, 99+%
| 611-72-3 |
|
Trans, Trans-2,4-Decadienal, Tech., 95%.
| 25152-84-5 |
|
Phenanthrene, 90%
| 85-01-8 |
|
N-(Propargyloxy)phthalimide, 98%
| 4616-63-1 |
|
Tetra-normal-butyltin, 96%
| 1461-25-2 |
|
Oxindole, 97+% (TLC)
| 59-48-3 |
|
Water, Demineralized
| 7732-18-5 |
|
Polyethyleneglycol 200 Monooctylether
| 27252-75-1 |
|
Cyclopropyl methyl ketone, 98%
| 765-43-5 |
|
Aniline Blue, certified biological stain
| 28631-66-5 |
|
Barbital Sodium
| 144-02-5 |
|
1,2,3,5-Tetrafluorobenzene, 99+%
| 2367-82-0 |
|
1-Chloro-9,10-bis(phenylethynyl)anthracene
| 41105-35-5 |
|
2-Chloroethyl isocyanate, 98%
| 1943-83-5 |
|
Brilliant Green
| 633-03-4 |
|
2-Methoxyphenylisocyanate, 99%
| 700-87-8 |
|
n-Methyl-o-toluamide, 99%
| 2170-09-4 |
|
1-Bromo-3,4-Dichlorobenzene, 98+%
| 18282-59-2 |
|
L(-)-Malic Acid,30 Wt% Aqueous Solution
| 97-67-6 |
|
Bromothymol Blue
| 76-59-5 |
|
Thallium (I) Nitrate, 99.5%
| 10102-45-1 |
|
Bromophenol Blue
| 115-39-9 |
|
Diethylene glycol dibutyl ether, 98%
| 112-73-2 |
|
D-Glutamic Acid, 99+%
| 6893-26-1 |
|
Bromophenol Blue Sodium Salt, Reagent ACS
| 62625-28-9 |
|
Blue Tetrazolium, Recrystallized
| 1871-22-3 |
|
4-Nitrobenzenesulfonyl Fluoride, 99% (HPLC)
| 349-96-2 |
|
Bromocresol Green
| 76-60-8 |
|
Tetraphenylarsonium chloride hydro- chloride, 95% (titr.)
| 21006-73-5 |
|
Acetone Oxime, 98%
| 127-06-0 |
|
Cresyl Violet Acetate (Cert)
| 10510-54-0 |
|
Hematein, 94% (uv-vis)
| 475-25-2 |
|
Poly(isobutylene), approximate MW 400,000
| 9003-27-4 |
|
Congo Red
| 573-58-0 |
|
DL-alpha-Methylbenzylamine, 99%
| 618-36-0 |
|
Allyl Trifluoroacetate
| 383-67-5 |
|
2-(2,4,5-Trichlorophenoxy)-propionic acid, 97%
| 93-72-1 |
|
2,6-Dichloroindophenol Sodium Salt
| 620-45-1 |
|
Eosin Y
| 17372-87-1 |
|
4-Nitrobenzoyl Azide
| 2733-41-7 |
|
Eosin b, spirit soluble
| 56360-46-4 |
|
Acetone sodium bisulfite, 97%(titr.)
| 540-92-1 |
|
Eriochrome Black T, Indicator Grade
| 1787-61-7 |
|
2-Nitrophenylacetonitrile, 98%
| 610-66-2 |
|
Ir-132, laser grade, 99% (uv-vis)
| 51010-97-0 |
|
Evans Blue Certified
| 314-13-6 |
|
Fast Green FCF
| 2353-45-9 |
|
Giemsa Stain
| 51811-82-6 |
|
7-Hydroxyquinoline, 99%
| 580-20-1 |
|
|