Search   
MSDS 
:
 4-Nitrobenzoyl Azide
CAS 
:
 2733-41-7
SYNONYMS 
:
 P-Nitrobenzoyl Azide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2733-41-7 |Benzoyl Azide, 4-Nitro- | ca 100 | 220-351-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.The toxicological properties of this material have
not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause irritation and dermatitis. May cause cyanosis of the
extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. Ingestion of large amounts may cause CNS
depression.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Aspiration may lead to pulmonary edema. Vapors may
cause dizziness or suffocation. May cause burning sensation in the
chest.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Use water spray to keep fire-exposed
containers cool. Containers may explode in the heat of a fire. Dust
can be an explosion hazard when exposed to heat or flame. Flammable
solid. Vapors may be heavier than air. They can spread along the
ground and collect in low or confined areas. Vapors or dust may form
explosive mixture with air. Dangerous fire hazard in the form of
dust when exposed to heat or flame.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid runoff into storm sewers and ditches which lead to
waterways. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Remove all sources of ignition. Use a spark-proof tool. Provide
ventilation. A vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Ground and bond
containers when transferring material. Use spark-proof tools and
explosion proof equipment. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 2733-41-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: almost white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 72 deg C
Autoignition Temperature: Not applicable.
Flash Point: 115 deg C ( 239.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Slightly soluble.
Specific Gravity/Density: >1.0
Molecular Formula: C7H4N4O3
Molecular Weight: 192.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. May be
shock-sensitive.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess
heat, strong oxidants.
Incompatibilities with Other Materials:
Acids, metallic salts, strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2733-41-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Benzoyl Azide, 4-Nitro- -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE SOLID, ORGANIC, N.O.S.*
Hazard Class: 4.1
UN Number: 1325
Packing Group: III
IMO
Shipping Name: FLAMMABLE SOLID, ORGANIC, N.O.S.
Hazard Class: 4.1
UN Number: 1325
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE SOLID, ORGANIC, N.O.S.
Hazard Class: 4.1
UN Number: 1325
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 2733-41-7: No information available.
Canada
CAS# 2733-41-7 is listed on Canada's NDSL List.
CAS# 2733-41-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2733-41-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/29/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
O,n-dimethylhydroxylamine hydrochloride, 98% 6638-79-5
Dl-mandelic acid, 99+% 611-72-3
Trans, Trans-2,4-Decadienal, Tech., 95%. 25152-84-5
Phenanthrene, 90% 85-01-8
N-(Propargyloxy)phthalimide, 98% 4616-63-1
Tetra-normal-butyltin, 96% 1461-25-2
Oxindole, 97+% (TLC) 59-48-3
Water, Demineralized 7732-18-5
Polyethyleneglycol 200 Monooctylether 27252-75-1
Cyclopropyl methyl ketone, 98% 765-43-5
Aniline Blue, certified biological stain 28631-66-5
Barbital Sodium 144-02-5
1,2,3,5-Tetrafluorobenzene, 99+% 2367-82-0
1-Chloro-9,10-bis(phenylethynyl)anthracene 41105-35-5
2-Chloroethyl isocyanate, 98% 1943-83-5
Brilliant Green 633-03-4
2-Methoxyphenylisocyanate, 99% 700-87-8
n-Methyl-o-toluamide, 99% 2170-09-4
1-Bromo-3,4-Dichlorobenzene, 98+% 18282-59-2
L(-)-Malic Acid,30 Wt% Aqueous Solution 97-67-6
Bromothymol Blue 76-59-5
Thallium (I) Nitrate, 99.5% 10102-45-1
Bromophenol Blue 115-39-9
Diethylene glycol dibutyl ether, 98% 112-73-2
D-Glutamic Acid, 99+% 6893-26-1
Bromophenol Blue Sodium Salt, Reagent ACS 62625-28-9
Blue Tetrazolium, Recrystallized 1871-22-3
4-Nitrobenzenesulfonyl Fluoride, 99% (HPLC) 349-96-2
Bromocresol Green 76-60-8
Tetraphenylarsonium chloride hydro- chloride, 95% (titr.) 21006-73-5
Acetone Oxime, 98% 127-06-0
Cresyl Violet Acetate (Cert) 10510-54-0
Hematein, 94% (uv-vis) 475-25-2
Poly(isobutylene), approximate MW 400,000 9003-27-4
Congo Red 573-58-0
DL-alpha-Methylbenzylamine, 99% 618-36-0
Allyl Trifluoroacetate 383-67-5
2-(2,4,5-Trichlorophenoxy)-propionic acid, 97% 93-72-1
2,6-Dichloroindophenol Sodium Salt 620-45-1
Eosin Y 17372-87-1
4-Nitrobenzoyl Azide 2733-41-7
Eosin b, spirit soluble 56360-46-4
Acetone sodium bisulfite, 97%(titr.) 540-92-1
Eriochrome Black T, Indicator Grade 1787-61-7
2-Nitrophenylacetonitrile, 98% 610-66-2
Ir-132, laser grade, 99% (uv-vis) 51010-97-0
Evans Blue Certified 314-13-6
Fast Green FCF 2353-45-9
Giemsa Stain 51811-82-6
7-Hydroxyquinoline, 99% 580-20-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net