**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2893-78-9 |Dichloroisocyanuric acid sodium salt | 96 | 220-767-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN O
Risk Phrases: 22 31 36/37 8
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Harmful if swallowed. Contact with acids liberates toxic gas.
Irritating to eyes and respiratory system. Contact with combustible
material may cause fire.
Potential Health Effects
The toxicological properties of this material have not been
investigated. Use appropriate procedures to prevent opportunities
for direct contact with the skin or eyes and to prevent inhalation.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Immediately flush
eyes with plenty of water for at least 15 minutes, occasionally
lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately. Do NOT induce vomiting. If conscious and
alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Strong oxidizer. Contact with other material may
cause fire.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use agent most appropriate to extinguish
fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Sweep up or absorb material, then place into a suitable
clean, dry, closed container for disposal.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Avoid contact with clothing and other combustible materials.
Storage:
Do not store near combustible materials.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Personal Protective Equipment
Eyes:
Not available.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Not available.
Color: Not available.
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 0 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight: 219.95
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents - moisture - strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 2893-78-9: XZ1900000
LD50/LC50:
CAS# 2893-78-9: Draize test, rabbit, eye: 100 mg/24H Mild; Draize
test, rabbit, skin: 500 mg/24H Mild; Draize test, rabbit, skin: 500
mg Severe; Oral, rat: LD50 = 1420 mg/kg.
Carcinogenicity:
Dichloroisocyanuric acid sodium salt -
Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN O
Risk Phrases:
R 22 Harmful if swallowed.
R 31 Contact with acids liberates toxic gas.
R 36/37 Irritating to eyes and respiratory system.
R 8 Contact with combustible material may cause
fire.
Safety Phrases:
S 8 Keep container dry.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 41 In case of fire and/or explosion do not breathe
fumes.
WGK (Water Danger/Protection)
CAS# 2893-78-9: 2
United Kingdom Occupational Exposure Limits
United Kingdom Maximum Exposure Limits
Canada
CAS# 2893-78-9 is listed on Canada's DSL List.
CAS# 2893-78-9 is listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 2893-78-9 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 8/24/1997 Revision #2 Date: 6/10/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Methoxynaphthalene, 95% (gc)
| 2216-69-5 |
|
2-Bromo-4'-Chloroacetophenone, 98+%
| 536-38-9 |
|
Methyl 3-bromopropionate, 97%
| 3395-91-3 |
|
1,4,7-Triazacyclononane trihydrochloride , 97%
| 58966-93-1 |
|
Ethylene/Methacrylic Acid Ionomer, Sodium Ion
| 25608-26-8 |
|
1-Fluoro-4-nitrobenzene, 99%
| 350-46-9 |
|
Bis(trimethylsilyl)telluride, 98%
| 4551-16-0 |
|
1-Acetoxy-1,3-butadiene, 97%, mixture of isomers
| 1515-76-0 |
|
Heneicosanol, 99%
| 15594-90-8 |
|
Amberlite ira-900 cl ion-exchange resin
| 9050-97-9 |
|
2-Ethyl-1,3-hexanediol, mixture of isomers, 99%
| 94-96-2 |
|
Poly(butadiene), cis and trans, average m. w. 420.000
| 9003-17-2 |
|
3-Bromo-o-xylene, 99%
| 576-23-8 |
|
Dichloroisocyanuric acid sodium salt
| 2893-78-9 |
|
Dimethyl 1,3-acetonedicarboxylate, 97%
| 1830-54-2 |
|
Octyl 4-Methoxycinnamate, 98%
| 5466-77-3 |
|
2-Cyclohexylethanol, 98%
| 4442-79-9 |
|
4-Morpholinecarbonitrile, 97+%
| 1530-89-8 |
|
2-Oxo-1-Cyclohexanepropionitrile, 99+%
| 4594-78-9 |
|
Azelaoyl Chloride, 98% (Titr.)
| 123-98-8 |
|
2-(4-Methoxyphenyl)malondialdehyde, 95+% (nmr)
| 53868-40-9 |
|
4,7-Dichloroquinoline, Tech., 95+%
| 86-98-6 |
|
Methyl azodicarboxylate, 97%
| 2446-84-6 |
|
D(+)-10-Camphorsulfonyl Chloride, 97%
| 21286-54-4 |
|
Thioisonicotinamide, 95%
| 2196-13-6 |
|
N-Methyl-4-nitroaniline, 99% (Titr.)
| 100-15-2 |
|
FLUORESCENT POLYMER SPHERES
| |
|
4-(2-Pyridylazo)resorcinol Disodium Salt, Dihydrate, 75% (UV-Vis)
| 52722-53-9 |
|
1,4-Diphenyl-1-butanone
| 5407-91-0 |
|
Amberlite ira-420, anion exchange resin
| 9002-24-8 |
|
Dibenzo-15-Crown-5, 98%
| 14262-60-3 |
|
Ammonium Hexachlororhodate(III)Trihydrate
| 81044-09-9 |
|
Methylmagnesium chloride, 22 wt% solution in tetrahydrofuran (THF)
| 109-99-9 |
|
3,3-Tetramethyleneglutaric Anhydride, 98%
| 5662-95-3 |
|
2-Chloro-6-Methylaniline, 98%
| 87-63-8 |
|
Aluminum Perchlorate Nonahydrate, 99%
| 81029-06-3 |
|
3,4-Dimercaptotoluene, zinc salt
| 26293-80-1 |
|
1-Phenyl-1-cyclohexanecarbonitrile 97%
| 2201-23-2 |
|
Allyl Mercaptan, Tech., 70+% Remainder Mainly Sulfide
| 870-23-5 |
|
4-Acetoxyacetophenone, 99%
| 13031-43-1 |
|
Lithiumtriethylborohydride, 1M solution in THF
| 109-99-9 |
|
Dimethyl Methoxymethylenemalonate, 98+%
| 22398-14-7 |
|
Methyl Oxalyl Chloride, 97%
| 5781-53-3 |
|
alpha-Hydroxy-heptafluoronaphthalene, 98%
| 5386-30-1 |
|
2-Chloro-5-fluoroanisole, 97%
| 450-89-5 |
|
Potassium selenocyanate, 99%
| 3425-46-5 |
|
2-Bromonaphtalene, 99% (GC)
| 580-13-2 |
|
Azobenzene, 99%
| 103-33-3 |
|
N-Carbobenzyloxy-DL-alanine
| 4132-86-9 |
|
Trimellitic Anhydride Acid Chloride, 99%
| 1204-28-0 |
|
|