Search   
MSDS 
:
 2-(4-Methoxyphenyl)malondialdehyde, 95+% (nmr)
CAS 
:
 53868-40-9
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 53868-40-9 |2-(4-Methoxyphenyl)malondialdehyde | >95 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Corrosive.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea,
vomiting and possible burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Do not get on skin or in eyes. Do
not ingest or inhale.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower.
Exposure Limits
CAS# 53868-40-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: off-white
Odor: Not available.
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 178 - 181 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C10H10O3
Molecular Weight: 178.19

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Light.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 53868-40-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-(4-Methoxyphenyl)malondialdehyde -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 53868-40-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 53868-40-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 53868-40-9 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Methoxynaphthalene, 95% (gc) 2216-69-5
2-Bromo-4'-Chloroacetophenone, 98+% 536-38-9
Methyl 3-bromopropionate, 97% 3395-91-3
1,4,7-Triazacyclononane trihydrochloride , 97% 58966-93-1
Ethylene/Methacrylic Acid Ionomer, Sodium Ion 25608-26-8
1-Fluoro-4-nitrobenzene, 99% 350-46-9
Bis(trimethylsilyl)telluride, 98% 4551-16-0
1-Acetoxy-1,3-butadiene, 97%, mixture of isomers 1515-76-0
Heneicosanol, 99% 15594-90-8
Amberlite ira-900 cl ion-exchange resin 9050-97-9
2-Ethyl-1,3-hexanediol, mixture of isomers, 99% 94-96-2
Poly(butadiene), cis and trans, average m. w. 420.000 9003-17-2
3-Bromo-o-xylene, 99% 576-23-8
Dichloroisocyanuric acid sodium salt 2893-78-9
Dimethyl 1,3-acetonedicarboxylate, 97% 1830-54-2
Octyl 4-Methoxycinnamate, 98% 5466-77-3
2-Cyclohexylethanol, 98% 4442-79-9
4-Morpholinecarbonitrile, 97+% 1530-89-8
2-Oxo-1-Cyclohexanepropionitrile, 99+% 4594-78-9
Azelaoyl Chloride, 98% (Titr.) 123-98-8
2-(4-Methoxyphenyl)malondialdehyde, 95+% (nmr) 53868-40-9
4,7-Dichloroquinoline, Tech., 95+% 86-98-6
Methyl azodicarboxylate, 97% 2446-84-6
D(+)-10-Camphorsulfonyl Chloride, 97% 21286-54-4
Thioisonicotinamide, 95% 2196-13-6
N-Methyl-4-nitroaniline, 99% (Titr.) 100-15-2
FLUORESCENT POLYMER SPHERES
4-(2-Pyridylazo)resorcinol Disodium Salt, Dihydrate, 75% (UV-Vis) 52722-53-9
1,4-Diphenyl-1-butanone 5407-91-0
Amberlite ira-420, anion exchange resin 9002-24-8
Dibenzo-15-Crown-5, 98% 14262-60-3
Ammonium Hexachlororhodate(III)Trihydrate 81044-09-9
Methylmagnesium chloride, 22 wt% solution in tetrahydrofuran (THF) 109-99-9
3,3-Tetramethyleneglutaric Anhydride, 98% 5662-95-3
2-Chloro-6-Methylaniline, 98% 87-63-8
Aluminum Perchlorate Nonahydrate, 99% 81029-06-3
3,4-Dimercaptotoluene, zinc salt 26293-80-1
1-Phenyl-1-cyclohexanecarbonitrile 97% 2201-23-2
Allyl Mercaptan, Tech., 70+% Remainder Mainly Sulfide 870-23-5
4-Acetoxyacetophenone, 99% 13031-43-1
Lithiumtriethylborohydride, 1M solution in THF 109-99-9
Dimethyl Methoxymethylenemalonate, 98+% 22398-14-7
Methyl Oxalyl Chloride, 97% 5781-53-3
alpha-Hydroxy-heptafluoronaphthalene, 98% 5386-30-1
2-Chloro-5-fluoroanisole, 97% 450-89-5
Potassium selenocyanate, 99% 3425-46-5
2-Bromonaphtalene, 99% (GC) 580-13-2
Azobenzene, 99% 103-33-3
N-Carbobenzyloxy-DL-alanine 4132-86-9
Trimellitic Anhydride Acid Chloride, 99% 1204-28-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net