**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5407-91-0 |1,4-Diphenyl-1-butanone | ca. 100 | 226-471-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Antidote:
None reported.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5407-91-0:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C16H16O
Molecular Weight: 224.30
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Has not been fully evaluated.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 5407-91-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1,4-Diphenyl-1-butanone -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 5407-91-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 5407-91-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5407-91-0 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 2/25/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Methoxynaphthalene, 95% (gc)
| 2216-69-5 |
|
2-Bromo-4'-Chloroacetophenone, 98+%
| 536-38-9 |
|
Methyl 3-bromopropionate, 97%
| 3395-91-3 |
|
1,4,7-Triazacyclononane trihydrochloride , 97%
| 58966-93-1 |
|
Ethylene/Methacrylic Acid Ionomer, Sodium Ion
| 25608-26-8 |
|
1-Fluoro-4-nitrobenzene, 99%
| 350-46-9 |
|
Bis(trimethylsilyl)telluride, 98%
| 4551-16-0 |
|
1-Acetoxy-1,3-butadiene, 97%, mixture of isomers
| 1515-76-0 |
|
Heneicosanol, 99%
| 15594-90-8 |
|
Amberlite ira-900 cl ion-exchange resin
| 9050-97-9 |
|
2-Ethyl-1,3-hexanediol, mixture of isomers, 99%
| 94-96-2 |
|
Poly(butadiene), cis and trans, average m. w. 420.000
| 9003-17-2 |
|
3-Bromo-o-xylene, 99%
| 576-23-8 |
|
Dichloroisocyanuric acid sodium salt
| 2893-78-9 |
|
Dimethyl 1,3-acetonedicarboxylate, 97%
| 1830-54-2 |
|
Octyl 4-Methoxycinnamate, 98%
| 5466-77-3 |
|
2-Cyclohexylethanol, 98%
| 4442-79-9 |
|
4-Morpholinecarbonitrile, 97+%
| 1530-89-8 |
|
2-Oxo-1-Cyclohexanepropionitrile, 99+%
| 4594-78-9 |
|
Azelaoyl Chloride, 98% (Titr.)
| 123-98-8 |
|
2-(4-Methoxyphenyl)malondialdehyde, 95+% (nmr)
| 53868-40-9 |
|
4,7-Dichloroquinoline, Tech., 95+%
| 86-98-6 |
|
Methyl azodicarboxylate, 97%
| 2446-84-6 |
|
D(+)-10-Camphorsulfonyl Chloride, 97%
| 21286-54-4 |
|
Thioisonicotinamide, 95%
| 2196-13-6 |
|
N-Methyl-4-nitroaniline, 99% (Titr.)
| 100-15-2 |
|
FLUORESCENT POLYMER SPHERES
| |
|
4-(2-Pyridylazo)resorcinol Disodium Salt, Dihydrate, 75% (UV-Vis)
| 52722-53-9 |
|
1,4-Diphenyl-1-butanone
| 5407-91-0 |
|
Amberlite ira-420, anion exchange resin
| 9002-24-8 |
|
Dibenzo-15-Crown-5, 98%
| 14262-60-3 |
|
Ammonium Hexachlororhodate(III)Trihydrate
| 81044-09-9 |
|
Methylmagnesium chloride, 22 wt% solution in tetrahydrofuran (THF)
| 109-99-9 |
|
3,3-Tetramethyleneglutaric Anhydride, 98%
| 5662-95-3 |
|
2-Chloro-6-Methylaniline, 98%
| 87-63-8 |
|
Aluminum Perchlorate Nonahydrate, 99%
| 81029-06-3 |
|
3,4-Dimercaptotoluene, zinc salt
| 26293-80-1 |
|
1-Phenyl-1-cyclohexanecarbonitrile 97%
| 2201-23-2 |
|
Allyl Mercaptan, Tech., 70+% Remainder Mainly Sulfide
| 870-23-5 |
|
4-Acetoxyacetophenone, 99%
| 13031-43-1 |
|
Lithiumtriethylborohydride, 1M solution in THF
| 109-99-9 |
|
Dimethyl Methoxymethylenemalonate, 98+%
| 22398-14-7 |
|
Methyl Oxalyl Chloride, 97%
| 5781-53-3 |
|
alpha-Hydroxy-heptafluoronaphthalene, 98%
| 5386-30-1 |
|
2-Chloro-5-fluoroanisole, 97%
| 450-89-5 |
|
Potassium selenocyanate, 99%
| 3425-46-5 |
|
2-Bromonaphtalene, 99% (GC)
| 580-13-2 |
|
Azobenzene, 99%
| 103-33-3 |
|
N-Carbobenzyloxy-DL-alanine
| 4132-86-9 |
|
Trimellitic Anhydride Acid Chloride, 99%
| 1204-28-0 |
|
|