**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 81029-06-3 |Aluminum Perchlorate Nonahydrate | 99 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: O C
Risk Phrases: 34 8
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns. Contact with combustible material may cause
fire.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause permanent corneal opacification. May
cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause burns to the gastrointestinal tract. May cause
systemic effects. May cause nausea, vomiting, and diarrhea, possibly
with blood.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead
to pulmonary edema. May cause systemic effects. May cause acute
pulmonary edema, asphyxia, chemical pneumonitis, and upper airway
obstruction caused by edema.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Strong oxidizer. Contact with other material may
cause fire. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Use water with
caution and in flooding amounts.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Contact professional
fire-fighters immediately.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Remove all sources of ignition. Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Keep container tightly
closed. Avoid contact with clothing and other combustible materials.
Do not get on skin or in eyes. Avoid ingestion and inhalation.
Discard contaminated shoes.
Storage:
Keep away from heat, sparks, and flame. Do not store near
combustible materials. Keep container closed when not in use.
Corrosives area.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 81029-06-3:
United Kingdom, WEL - TWA: (listed as aluminum, soluble salts): 2
mg/m3 TWA
United Kingdom, WEL - STEL: (listed as aluminum, soluble salts):
mg/m3 STEL
Belgium - TWA: (listed as aluminum, soluble salts): 2 mg/m3 VLE (
Al)
France - VME: (listed as aluminum, soluble salts): 2 mg/m3 VME
Germany: (listed as aluminum, soluble salts): 2 mg/m3 VME
Malaysia: (listed as aluminum, soluble salts): 2 mg/m3 TWA (as Al
Spain: (listed as aluminum, soluble salts): 2 mg/m3 VLA-ED (as Al
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear a chemical apron. Wear appropriate clothing to
prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Crystals
Color: moist white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: AlCl3O12.9H2O
Molecular Weight: 487.46
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation,
combustible materials, reducing agents, strong oxidants.
Incompatibilities with Other Materials:
Reducing agents, moisture.
Hazardous Decomposition Products:
Hydrogen chloride, irritating and toxic fumes and gases, aluminum
oxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 81029-06-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Aluminum Perchlorate Nonahydrate -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: PERCHLORATES, INORGANIC, N.O.S.
Hazard Class: 5.1
UN Number: 1481
Packing Group: II
IMO
Shipping Name: PERCHLORATES, INORGANIC, N.O.S.
Hazard Class: 5.1
UN Number: 1481
Packing Group: II
RID/ADR
Shipping Name: PERCHLORATES, INORGANIC, N.O.S.
Hazard Class: 5.1
UN Number: 1481
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: O C
Risk Phrases:
R 34 Causes burns.
R 8 Contact with combustible material may cause
fire.
Safety Phrases:
S 17 Keep away from combustible material.
WGK (Water Danger/Protection)
CAS# 81029-06-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 81029-06-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 81029-06-3 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 7/30/1999 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Methoxynaphthalene, 95% (gc)
| 2216-69-5 |
|
2-Bromo-4'-Chloroacetophenone, 98+%
| 536-38-9 |
|
Methyl 3-bromopropionate, 97%
| 3395-91-3 |
|
1,4,7-Triazacyclononane trihydrochloride , 97%
| 58966-93-1 |
|
Ethylene/Methacrylic Acid Ionomer, Sodium Ion
| 25608-26-8 |
|
1-Fluoro-4-nitrobenzene, 99%
| 350-46-9 |
|
Bis(trimethylsilyl)telluride, 98%
| 4551-16-0 |
|
1-Acetoxy-1,3-butadiene, 97%, mixture of isomers
| 1515-76-0 |
|
Heneicosanol, 99%
| 15594-90-8 |
|
Amberlite ira-900 cl ion-exchange resin
| 9050-97-9 |
|
2-Ethyl-1,3-hexanediol, mixture of isomers, 99%
| 94-96-2 |
|
Poly(butadiene), cis and trans, average m. w. 420.000
| 9003-17-2 |
|
3-Bromo-o-xylene, 99%
| 576-23-8 |
|
Dichloroisocyanuric acid sodium salt
| 2893-78-9 |
|
Dimethyl 1,3-acetonedicarboxylate, 97%
| 1830-54-2 |
|
Octyl 4-Methoxycinnamate, 98%
| 5466-77-3 |
|
2-Cyclohexylethanol, 98%
| 4442-79-9 |
|
4-Morpholinecarbonitrile, 97+%
| 1530-89-8 |
|
2-Oxo-1-Cyclohexanepropionitrile, 99+%
| 4594-78-9 |
|
Azelaoyl Chloride, 98% (Titr.)
| 123-98-8 |
|
2-(4-Methoxyphenyl)malondialdehyde, 95+% (nmr)
| 53868-40-9 |
|
4,7-Dichloroquinoline, Tech., 95+%
| 86-98-6 |
|
Methyl azodicarboxylate, 97%
| 2446-84-6 |
|
D(+)-10-Camphorsulfonyl Chloride, 97%
| 21286-54-4 |
|
Thioisonicotinamide, 95%
| 2196-13-6 |
|
N-Methyl-4-nitroaniline, 99% (Titr.)
| 100-15-2 |
|
FLUORESCENT POLYMER SPHERES
| |
|
4-(2-Pyridylazo)resorcinol Disodium Salt, Dihydrate, 75% (UV-Vis)
| 52722-53-9 |
|
1,4-Diphenyl-1-butanone
| 5407-91-0 |
|
Amberlite ira-420, anion exchange resin
| 9002-24-8 |
|
Dibenzo-15-Crown-5, 98%
| 14262-60-3 |
|
Ammonium Hexachlororhodate(III)Trihydrate
| 81044-09-9 |
|
Methylmagnesium chloride, 22 wt% solution in tetrahydrofuran (THF)
| 109-99-9 |
|
3,3-Tetramethyleneglutaric Anhydride, 98%
| 5662-95-3 |
|
2-Chloro-6-Methylaniline, 98%
| 87-63-8 |
|
Aluminum Perchlorate Nonahydrate, 99%
| 81029-06-3 |
|
3,4-Dimercaptotoluene, zinc salt
| 26293-80-1 |
|
1-Phenyl-1-cyclohexanecarbonitrile 97%
| 2201-23-2 |
|
Allyl Mercaptan, Tech., 70+% Remainder Mainly Sulfide
| 870-23-5 |
|
4-Acetoxyacetophenone, 99%
| 13031-43-1 |
|
Lithiumtriethylborohydride, 1M solution in THF
| 109-99-9 |
|
Dimethyl Methoxymethylenemalonate, 98+%
| 22398-14-7 |
|
Methyl Oxalyl Chloride, 97%
| 5781-53-3 |
|
alpha-Hydroxy-heptafluoronaphthalene, 98%
| 5386-30-1 |
|
2-Chloro-5-fluoroanisole, 97%
| 450-89-5 |
|
Potassium selenocyanate, 99%
| 3425-46-5 |
|
2-Bromonaphtalene, 99% (GC)
| 580-13-2 |
|
Azobenzene, 99%
| 103-33-3 |
|
N-Carbobenzyloxy-DL-alanine
| 4132-86-9 |
|
Trimellitic Anhydride Acid Chloride, 99%
| 1204-28-0 |
|
|