Search   
MSDS 
:
 2-Chloro-6-Methylaniline, 98%
CAS 
:
 87-63-8
SYNONYMS 
:
 6-Chloro-o-Toluidine; 2-Amino-3 Chlorotoluene.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 87-63-8 |2-Chloro-6-Methylaniline | 99 | 201-759-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
Causes skin irritation. Harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea. May cause methemoglobinemia, cyanosis
(bluish discoloration of skin due to deficient oxygenation of the
blood), convulsions, and death. The toxicological properties of this
substance have not been fully investigated. Effects may be delayed 2
to 4 hours. Methemoglobinemia is characterized by dizziness,
drowsiness, headache, shortness of breath, cyanosis (bluish
discoloration of skin due to deficient oxygenation of the blood),
rapid heart rate and chocolate-brown colored blood.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Harmful if inhaled.
Chronic:
May cause methemoglobinemia, which is characterized by
chocolate-brown colored blood, headache, weakness, dizziness, breath
shortness, cyanosis (bluish skin due to deficient oxygenation of
blood), rapid heart rate, unconsciousness and possible death.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Containers may explode in the heat of a fire.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Cool containers with flooding quantities of
water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use only in a well-ventilated area. Avoid breathing dust, vapor,
mist, or gas. Avoid contact with skin and eyes. Keep container
tightly closed.
Storage:
Keep away from heat and flame. Store in a cool, dry, well-ventilated
area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 87-63-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear wine red - dark purple
Odor: characteristic odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 215 deg C @ 760.00mmHg
Freezing/Melting Point: 2 deg C
Autoignition Temperature: Not available.
Flash Point: 98 deg C ( 208.40 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: immiscible in water
Specific Gravity/Density: 1.1520g/cm3
Molecular Formula: C7H8ClN
Molecular Weight: 141.60

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources.
Incompatibilities with Other Materials:
Acids - acid chlorides - acid anhydrides - chloroformates - strong
oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 87-63-8: XU5100000
LD50/LC50:
Not available.
Carcinogenicity:
2-Chloro-6-Methylaniline -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CHLOROTOLUIDINES, LIQUID
Hazard Class: 6.1
UN Number: 2239
Packing Group: III
IMO
Shipping Name: CHLOROTOLUIDINES, LIQUID
Hazard Class: 6.1
UN Number: 2239
Packing Group: III
RID/ADR
Shipping Name: CHLOROTOLUIDINES, LIQUID
Hazard Class: 6.1
UN Number: 2239
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 87-63-8: No information available.
Canada
CAS# 87-63-8 is listed on Canada's DSL List.
CAS# 87-63-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 87-63-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/05/1998 Revision #4 Date: 12/01/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Methoxynaphthalene, 95% (gc) 2216-69-5
2-Bromo-4'-Chloroacetophenone, 98+% 536-38-9
Methyl 3-bromopropionate, 97% 3395-91-3
1,4,7-Triazacyclononane trihydrochloride , 97% 58966-93-1
Ethylene/Methacrylic Acid Ionomer, Sodium Ion 25608-26-8
1-Fluoro-4-nitrobenzene, 99% 350-46-9
Bis(trimethylsilyl)telluride, 98% 4551-16-0
1-Acetoxy-1,3-butadiene, 97%, mixture of isomers 1515-76-0
Heneicosanol, 99% 15594-90-8
Amberlite ira-900 cl ion-exchange resin 9050-97-9
2-Ethyl-1,3-hexanediol, mixture of isomers, 99% 94-96-2
Poly(butadiene), cis and trans, average m. w. 420.000 9003-17-2
3-Bromo-o-xylene, 99% 576-23-8
Dichloroisocyanuric acid sodium salt 2893-78-9
Dimethyl 1,3-acetonedicarboxylate, 97% 1830-54-2
Octyl 4-Methoxycinnamate, 98% 5466-77-3
2-Cyclohexylethanol, 98% 4442-79-9
4-Morpholinecarbonitrile, 97+% 1530-89-8
2-Oxo-1-Cyclohexanepropionitrile, 99+% 4594-78-9
Azelaoyl Chloride, 98% (Titr.) 123-98-8
2-(4-Methoxyphenyl)malondialdehyde, 95+% (nmr) 53868-40-9
4,7-Dichloroquinoline, Tech., 95+% 86-98-6
Methyl azodicarboxylate, 97% 2446-84-6
D(+)-10-Camphorsulfonyl Chloride, 97% 21286-54-4
Thioisonicotinamide, 95% 2196-13-6
N-Methyl-4-nitroaniline, 99% (Titr.) 100-15-2
FLUORESCENT POLYMER SPHERES
4-(2-Pyridylazo)resorcinol Disodium Salt, Dihydrate, 75% (UV-Vis) 52722-53-9
1,4-Diphenyl-1-butanone 5407-91-0
Amberlite ira-420, anion exchange resin 9002-24-8
Dibenzo-15-Crown-5, 98% 14262-60-3
Ammonium Hexachlororhodate(III)Trihydrate 81044-09-9
Methylmagnesium chloride, 22 wt% solution in tetrahydrofuran (THF) 109-99-9
3,3-Tetramethyleneglutaric Anhydride, 98% 5662-95-3
2-Chloro-6-Methylaniline, 98% 87-63-8
Aluminum Perchlorate Nonahydrate, 99% 81029-06-3
3,4-Dimercaptotoluene, zinc salt 26293-80-1
1-Phenyl-1-cyclohexanecarbonitrile 97% 2201-23-2
Allyl Mercaptan, Tech., 70+% Remainder Mainly Sulfide 870-23-5
4-Acetoxyacetophenone, 99% 13031-43-1
Lithiumtriethylborohydride, 1M solution in THF 109-99-9
Dimethyl Methoxymethylenemalonate, 98+% 22398-14-7
Methyl Oxalyl Chloride, 97% 5781-53-3
alpha-Hydroxy-heptafluoronaphthalene, 98% 5386-30-1
2-Chloro-5-fluoroanisole, 97% 450-89-5
Potassium selenocyanate, 99% 3425-46-5
2-Bromonaphtalene, 99% (GC) 580-13-2
Azobenzene, 99% 103-33-3
N-Carbobenzyloxy-DL-alanine 4132-86-9
Trimellitic Anhydride Acid Chloride, 99% 1204-28-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net