Search   
MSDS 
:
 FLUORESCENT POLYMER SPHERES
CAS 
:
 
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| |Fluorescent polymer spheres | | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
The toxicological properties of this material have not been
investigated. Use appropriate procedures to prevent opportunities
for direct contact with the skin or eyes and to prevent inhalation.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid
ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels.
Exposure Limits
CAS# :
United Kingdom, WEL - TWA: (listed as tellurium): 0.1 mg/m3 TWA
United Kingdom, WEL - STEL: (listed as tellurium): 0.3 mg/m3 STEL
United States OSHA: 0.1 mg/m3 TWA (listed under Tellurium).
Belgium - TWA: (listed as tellurium): 0.1 mg/m3 VLE
France - VME: (listed as tellurium): 0.1 mg/m3 VME
Germany: (listed as tellurium): 0.1 mg/m3 VME
Malaysia: (listed as tellurium): 0.1 mg/m3 TWA
Netherlands: (listed as tellurium): 0.1 mg/m3 MAC
Russia: (listed as tellurium): 0.01 mg/m3 TWA
Spain: (listed as tellurium): 0.1 mg/m3 VLA-ED

Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Not available.
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula:
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Not available.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Not available.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Fluorescent polymer spheres -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# : No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/04/2003 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Methoxynaphthalene, 95% (gc) 2216-69-5
2-Bromo-4'-Chloroacetophenone, 98+% 536-38-9
Methyl 3-bromopropionate, 97% 3395-91-3
1,4,7-Triazacyclononane trihydrochloride , 97% 58966-93-1
Ethylene/Methacrylic Acid Ionomer, Sodium Ion 25608-26-8
1-Fluoro-4-nitrobenzene, 99% 350-46-9
Bis(trimethylsilyl)telluride, 98% 4551-16-0
1-Acetoxy-1,3-butadiene, 97%, mixture of isomers 1515-76-0
Heneicosanol, 99% 15594-90-8
Amberlite ira-900 cl ion-exchange resin 9050-97-9
2-Ethyl-1,3-hexanediol, mixture of isomers, 99% 94-96-2
Poly(butadiene), cis and trans, average m. w. 420.000 9003-17-2
3-Bromo-o-xylene, 99% 576-23-8
Dichloroisocyanuric acid sodium salt 2893-78-9
Dimethyl 1,3-acetonedicarboxylate, 97% 1830-54-2
Octyl 4-Methoxycinnamate, 98% 5466-77-3
2-Cyclohexylethanol, 98% 4442-79-9
4-Morpholinecarbonitrile, 97+% 1530-89-8
2-Oxo-1-Cyclohexanepropionitrile, 99+% 4594-78-9
Azelaoyl Chloride, 98% (Titr.) 123-98-8
2-(4-Methoxyphenyl)malondialdehyde, 95+% (nmr) 53868-40-9
4,7-Dichloroquinoline, Tech., 95+% 86-98-6
Methyl azodicarboxylate, 97% 2446-84-6
D(+)-10-Camphorsulfonyl Chloride, 97% 21286-54-4
Thioisonicotinamide, 95% 2196-13-6
N-Methyl-4-nitroaniline, 99% (Titr.) 100-15-2
FLUORESCENT POLYMER SPHERES
4-(2-Pyridylazo)resorcinol Disodium Salt, Dihydrate, 75% (UV-Vis) 52722-53-9
1,4-Diphenyl-1-butanone 5407-91-0
Amberlite ira-420, anion exchange resin 9002-24-8
Dibenzo-15-Crown-5, 98% 14262-60-3
Ammonium Hexachlororhodate(III)Trihydrate 81044-09-9
Methylmagnesium chloride, 22 wt% solution in tetrahydrofuran (THF) 109-99-9
3,3-Tetramethyleneglutaric Anhydride, 98% 5662-95-3
2-Chloro-6-Methylaniline, 98% 87-63-8
Aluminum Perchlorate Nonahydrate, 99% 81029-06-3
3,4-Dimercaptotoluene, zinc salt 26293-80-1
1-Phenyl-1-cyclohexanecarbonitrile 97% 2201-23-2
Allyl Mercaptan, Tech., 70+% Remainder Mainly Sulfide 870-23-5
4-Acetoxyacetophenone, 99% 13031-43-1
Lithiumtriethylborohydride, 1M solution in THF 109-99-9
Dimethyl Methoxymethylenemalonate, 98+% 22398-14-7
Methyl Oxalyl Chloride, 97% 5781-53-3
alpha-Hydroxy-heptafluoronaphthalene, 98% 5386-30-1
2-Chloro-5-fluoroanisole, 97% 450-89-5
Potassium selenocyanate, 99% 3425-46-5
2-Bromonaphtalene, 99% (GC) 580-13-2
Azobenzene, 99% 103-33-3
N-Carbobenzyloxy-DL-alanine 4132-86-9
Trimellitic Anhydride Acid Chloride, 99% 1204-28-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net