MSDS Intact-PTH rev.02 Page 1
MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF THE PREPARATION AND COMPANY NAME.
Product Name: Intact-PTH (Parathyroid Hormone) Catalog No: PT131T
Manufacturer: Calbiotech, Inc.
Telephone No. in Case of Emergency: 619-846-9553 Day: 619-660-6162
2. COMPOSITION of the kit COMPONENTS
Components Identification Quantity Main Ingredients
1. Microwell Strips Coated wells 1
Peroxidase (Enzyme) labeled PTH 1 bottle (5.4 mL)
2. Enzyme Conjugate
Antibody (ready to use)
1 bottle (5.4 mL)
3. Biotinylated Conjugate PTH Antibody
(ready to use)
1 bottle (25 mL)
4. Wash Concentrate Wash Concentrate 20X
1 bottle (12 mL)
5. TMB Chromogenic Substrate TMB Substrate
(ready to use)
1 bottle (20 mL)
6. Stop Solution Stop Solution 1N HCL (1N H2SO4)
(ready to use)
6 Lyophilized
7. PTH Standards Standards
vials
8. Package Insert Package Insert 1 N/A
3. HAZARDS IDENTIFICATION
3.1. Potential Biohazard:
The calibrators contain human source components which have been tested and found non-reactive for
hepatitis B surface antigen as well as HIV antibody with FDA licensed reagents. However, as there is
no test method that can offer complete assurance that HIV, Hepatitis B virus or other infectious agents
are absent, these reagents should be handled at the Biosafety Level 2, as recommended in the Centers
for Disease Control/National Institutes of Health manual, "Biosafety in Microbiological and Biomedical
Laboratories." 1984
All bovine products and goat sera have been derived from animals of US origin and processed in USDA
licensed facilities
3.2. Chemical Hazard:
The TMB Chromogenic Substrate containing TMB, is formulated with DMSO, an irritant and mucous
membranes. In case of contact with any of these reagents, wash thoroughly with water. TMB is a
suspected carcinogen.
Component Stop Solution is an acidic and corrosive agent. Avoid contact with skin.
10461 Austin Drive, Suite G, Spring Valley, CA U.S.A. 鈥? Tel: (619) 660-6162 鈥? FAX: (619) 660-6970 鈥? Web: www.calbiotech.com
MSDS Intact-PTH rev.02 Page 2
4. FIRST AID
4.1. Skin Contact: Remove contaminated clothing and wash the exposed skin area thoroughly with soap
and water.
4.2. Eye Contact: Flush with copious amounts of water for at least 15 minutes. Seek medical attention.
4.3. Inhalation: Remove to fresh air, give oxygen if breathing becomes difficult and seek medical
attention.
4.4 Ingestion: Flush mouth with copious amounts of water, provided that the person is conscious and
seek medical attention.
5. MEASURES IN CASE OF FIRE
5.1. Suitable Extinguishing Media: Chemical or water fire extinguisher.
5.2. Extinguishing Media Not to be Used: None known.
5.3. Special Fire Fighting Procedures: None Known.
5.4. Unusual Fire and Explosion Hazards: N/A
5.5. NFPA Rating: Health: 3, Flammability: 0, Reactivity: 2 (for concentrated
Sulfuric Acid)
6. MEASURES IN CASE OF ACCIDENTAL SPILL
6.1. Body Precautions: Wear rubber gloves, impermeable shoe covers and long laboratory coat.
6.2. Environmental Precautions: Contain the spill to the smallest area possible.
6.3. Cleaning Measures: Take care not to contaminate body. Absorb the material with disposable
towels. Soak area with a 10% bleach solution and wipe up with disposable towels. Dispose of all
contaminated trash in accordance with local regulations.
7. MANIPULATION AND STORAGE
7.1. Manipulation: Wear suitable personal protective equipment. Take care not to splash spill or splatter
reagents. Do not eat, drink, smoke or apply cosmetics in laboratory areas. Do not pipette samples or
reagents by mouth.
7.2. Storage: Store the test kits in 2 - 80 C refrigerators designated and labeled to contain human blood
products.
8. TOXICOLOGY INFORMALTION
Effects of Dangerous Substances at the concentrations Present in the Preparation:
8.2 Toxic Affects: Potential Biohazard
8.3 Harmful Affects: Potential Biohazard
8.4 Sensitizing Affects: None Known
8.5 Carcinogenic / Mutagenic/ Teratogen Effects: None Known
9. ECOLOGICAL EFFECTS None known.
10. DISPOSAL REQUIREMENTS
10.1. Disposal of Preparation Left: Dispose according to current regional and national rules.
10.2. Contaminated Containers: Dispose of following current regulations.
11. TRANSPORTATION INFORMATION (Due to the sulfuric acid preparation in the kit):
10461 Austin Drive, Suite G, Spring Valley, CA U.S.A. 鈥? Tel: (619) 660-6162 鈥? FAX: (619) 660-6970 鈥? Web: www.calbiotech.com
MSDS Intact-PTH rev.02 Page 3
11.1. Road / Railway Haulage ADR/RID: Class 8, Corrosive, limited quantity of material, excepted
package
11.2. Sea Freight IMO (IMDG): Class 8, Corrosive, limited quantity of material, excepted
package
11.3. Air Freight IATA (ICAO): Class 8, Corrosive, limited quantity of material, excepted
package
11.4. UN Number: 2796
12. INFORMATION ON REGULATION
12.1. Classification: This preparation is classified and labeled in accordance with applicable national and
international regulations.
12.2. Symbols of Danger: N/A
12.3. "R" Phrases Indicating Specific Risks: Irritant
R36/37/38, Irritating to the eyes, respiratory system and skin.
12.4. "S" Phrases Indicating Caution:
S26, In case of contact with any reagents rinse with copious amounts of water for at least 15 minutes. If
irritation persists, seek medical attention.
S36, Wear suitable protective clothing.
13. OTHER INFORMATION
Recommended Use: For Research Use Only or clinical investigational use only.
Not for use on or in human and animals.
Information contained in this MSDS relies upon our best knowledge of the product upon issue of this
document to describe the use, storage, transport and disposal under safe and secure measures. Such
information is not a guarantee of the characteristics and specific quality of the product. This MSDS
concerns the stated preparation and cannot apply to the product if used with other materials or in a
process other than those specifically stated.
2008-01-30
10461 Austin Drive, Suite G, Spring Valley, CA U.S.A. 鈥? Tel: (619) 660-6162 鈥? FAX: (619) 660-6970 鈥? Web: www.calbiotech.com
|