TM
GEL INSECTICIDE
Pressurized Bait System
PRECAUTIONARY STATEMENTS
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION!
May be harmful if swallowed. Avoid contact with skin and clothing. Wash hands thoroughly after handling.
FIRST AID
If Swallowed: Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to
swallow. Do not induce vomiting unless told to do so by the poison control center or doctor. Do not give anything by mouth to an
unconscious person. Have the product container or label with you when calling a poison control center or doctor or going for treatment.
In case of emergency, call day or night 800-832-HELP (4357).
PHYSICAL OR CHEMICAL HAZARDS
Contents under pressure. Do not puncture or incinerate container. Exposure to temperatures above 130藲F may cause bursting.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Do not apply this product by any method not specified on this
label.
Do not apply this product in a way that will contact a person or pet.
SIEGE GEL PRESSURIZED BAIT SYSTEM may be used as a spot or crack and crevice treatment for the control of cockroaches (including carbamate,
organophosphate and pyrethroid resistant strains) in and around homes and the non-food/feed areas of institutional, warehousing, and commercial
establishments (such as groceries and supermarkets; meat, poultry and shell egg grading plants; hotels and motels; hospitals and nursing homes;
schools; laboratories; computer facilities; sewers; buses; boats, ships, trains and planes; pet shops; and zoos.)
Nonfood areas are areas such as garbage rooms, lavatories, floor drains (to sewers), entries, vestibules, offices, locker rooms, machine rooms, boiler
rooms, garages, mop closets, and storage (after bottling or canning).
SIEGE GEL PRESSURIZED BAIT SYSTEM may be used only as a crack and crevice treatment in food/feed areas of restaurants and other commercial
or institutional food handling establishments, and food manufacturing, processing, storage and warehousing facilities. Food areas include areas for
receiving, storage, packing (canning, bottling, wrapping, boxing), preparing, edible waste storage and enclosed processing systems (mills, dairies, edible
oils, syrups) and distribution facilities. Serving areas (when food is exposed and facility is in operation) are also considered food areas. Serving areas are
areas where prepared foods are served, such as dining rooms, but excluding areas where foods may be prepared or held.
APPLICATIONS OF THIS PRODUCT IN THE FOOD/FEED AREAS OF FOOD/FEED -HANDLING ESTABLISHMENTS OTHER THAN AS A CRACK
AND CREVICE TREATMENT ARE NOT PERMITTED.
Keep exposed gel away from open food and food contact surfaces. Do not place treatments in locations where routine cleansing operations may transfer
diluted bait to food or food preparation surfaces. Do not apply gel to areas where food, food utensils or food processing/food preparation surfaces may
become contaminated. Do not apply to areas that are routinely washed such as: cracks and crevices in tops of tables, food preparation and prepared
food holding surfaces, as gel may be removed by washing. Do not apply to surfaces where the temperature exceeds 130藲F. Examples include, but are
not limited to, portions of stoves, ovens, grills, fume hoods, heat lamps, coffee urns, steam tables, toasters, fryers, dishwashers and hot water pipes.
Care should be taken to avoid depositing gel onto exposed surfaces. If gel contacts an exposed surface, remove gel and wash exposed surface promptly.
Do not apply gel to areas which have been recently sprayed with insecticide, and do not spray insecticide over gel as it may cause the bait to become
repellent.
Application rate is dependent on level of infestation and species to be controlled. Numerous smaller placements will provide faster control than few larger
spots, especially for German cockroach control. Pest population reduction will be apparent within a week or less. Cockroaches become lethargic after
ingesting the bait and some may be seen during daylight hours.
PRESSURIZED BAIT SYSTEM APPLICATION RATE: For low to moderate infestation of Cockroaches, place 6-12 bait points per square meter. For
heavy infestations of Cockroaches, 12-24 bait points per square meter. The pressurized bait system is approximately 0.04 grams per spot and occupies
an area about 3mm of space.
Cockroach Application Rate Application Method
Species (g/m2 infested surface areas)
Heavy Infestation
Low to Moderate Infestation
Small, such as German or Thin Film or Small Spots
0.5 - 1.0
0.24 - 0.50
brown-banded
Large, such as American, 0.50 to 1.0 Larger Spots
smokybrown or Oriental
The lower application rate should be used for low to moderate infestations and the higher rate for more severe infestations. Gel placements should be at 庐Registered Trademark of BASF
or near harborages or aggregation areas, such as cracks and crevices, corners, or areas of movement.
Outdoor Use Directions: For use outdoors to control smokybrown, American, oriental, woods, and other outdoor cockroach species. Apply bait to likely
points of entry or harborage sites, such as: the cracks and crevices around windows, doors, porches, sills and screens; holes where pipes or utilities
enter a structure; expansion joints; beneath siding or shingles; around firewood piles; eaves; attic or soffit vents; weep holes in masonry; and similar
sites. Also, apply bait in likely breeding areas, such as tree holes, behind palm fronds, basements, crawlspaces, attics, garages, or similar sites.
Priority treatment areas may be identified by visual inspection of such areas listed above or aided by trapping techniques or spot flushings.
To apply gel, remove the cap on nozzle, touch the application tip to surface, and apply. Recapping the application tip after treatment is completed is
recommended to preserve bait freshness. The bait will adhere to non-greasy or non-dusty surfaces and will remain palatable to cockroaches for at least 6
months. Repeat treatments as necessary to maintain adequate control.
DISCLAIMER
The label instructions for the use of this product reflect the opinion of experts based on field use and tests. The directions are believed to be reliable and
should be followed carefully. However, it is impossible to eliminate all risks inherently associated with use of this product. Reduced performance or other
unintended consequences may result from external factors such as environmental conditions, presence of other materials, or the use or application of the
product contrary to label instructions all of which are beyond the control of BASF. All such risks shall be assumed by the user. BASF warrants only that
the material contained herein conforms to the chemical description on the label and is reasonably fit for the use therein described when used in
accordance with the directions for use, subject to the risks referred to above.
Any damages arising from a breach of this warranty shall be limited to direct damages and shall not include consequential commercial damages such as
loss of profits or values or any other special or indirect damages.
BASF makes no other express or implied warranty, including any other express or implied warranty of fitness or merchantability.
STORAGE & DISPOSAL
Do not contaminate water, food, or feed by storage or disposal.
STORAGE: Store in a cool, dry area away from heat or open flame.
DISPOSAL: This container may be recycled in the few but growing number of communities where steel aerosol can recycling is available. Before offering
for recycling, empty the can by using the product according to the label. DO NOT PUNCTURE! If recycling is not available, wrap the container and
discard in the trash.
U.S. Patent Nos. 4,913,323, 5,419,466, 5,065,900.
Distributed by:
Waterbury Companies, Inc.
Professional Products Division
Waterbury, CT 06722
www.CBProProducts.com
|