Page 1 of 6
MSDS #: PF1003-0101
MATERIAL SAFETY DATA SHEET Product Code: 7101A003(AA)
SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
COMPANY/UNDERTAKING
TS Film TS-MT460
Product Name: TS4400
Distributor: Canon Australia Pty Ltd
7101A003(AA)
Product Code:
1 Thomas Holt Drive,
Company Name: Canon Inc.
North Ryde NSW 2113
30-2, Shimomaruko 3-Chome, Ohta-ku, Tokyo 146-8501, Japan
Address:
Use of the Product: Transparent Film Roll for Canon Thermal Transfer Sealing Machine Ph: 02 9805 2000
SECTION 2 COMPOSITION/INFORMATION ON INGREDIENTS
< Ingredient(s) >
CAS # / Weight EU Symbol/ USA
Chemical Name / ACGIH TLV EU ILV DFG MAK
EC # % R-Phrase OSHA PEL
Generic name
Polyethylene Not applicable 57-60 Not designated Not designated Not designated Not designated Not designated
Terephthalate
Acrylic Resin Not applicable 33-43 Not designated Not designated Not designated Not designated Not designated
Silicone Resin Not applicable 3-6 Not designated Not designated Not designated Not designated Not designated
< Carcinogen >
Chemical Name CAS # Reference
No component of this film is listed as a human carcinogen or a potential
carcinogen in IARC Monographs,NTP,OSHA regulations and Annex I to
Directive 67/548/EEC.
SECTION 3 HAZARDS IDENTIFICATION
EU Classification:
Not applicable
Emergency Overview:
Roll form product of Polyethylene Terephthalate film coated with acrylic resin.
Potential Health Effects and Symptoms:
Inhalation:
Not applicable
Ingestion:
Ingestion is a minor route of entry under nomal conditions of use.
Eye:
Not applicable
Skin:
No significant irritation is expected.
Chronic Effects:
Not identified
Medical Conditions Generally known to be Aggravated by Exposure:
Not identified
Date of Issue: June 7, 2002 Revised:
Page 2 of 6
MSDS #: PF1003-0101
MATERIAL SAFETY DATA SHEET Product Code: 7101A003(AA)
SECTION 4 FIRST AID MEASURES
First Aid Measures:
Inhalation:
If discomfort occurs, get medical attention.
Ingestion:
Rinse mouth. If irritation or discomfort occurs, obtain medical advice immediately.
Eye:
Immediately flush with water for 5 minutes or until the chemical is removed.
If irritation persists, obtain medical advice immediately.
Skin:
Wash with water and soap or mild detergent.
If irritation persists, obtain medical advice.
Note to Physicians:
None
SECTION 5 FIRE FIGHTING MEASURES
Fire Fighting Measures:
Extinguishing Media:
CO2 , water , dry chemicals , and other common extinguisher
Unsuitable Extinguishing Media:
None
Special Fire Fighting Procedures:
None
Unusual Fire and Explosion Hazards:
None
Fire and Explosive Properties (See also Section 9):
Hazardous Combustion Products:
CO2 , CO
Other Properties:
None
SECTION 6 ACCIDENTAL RELEASE MEASURES
Personal Precautions:
Not applicable
Environmental Precautions:
Not applicable
Method for Cleaning Up:
Not applicable
SECTION 7 HANDLING AND STORAGE
Handling:
Use with adequate ventilation.
Storage:
Keep in a cool and dry place.
Specific Uses:
Transpearent Film Roll for Thermal Transfer Sealing Machine.
For more information, please refer to the instruction manual of this product.
SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Guidelines:
Not applicable
Engineering Controls:
Use adequate ventilation.
P lP i E i ()
Date of Issue: June 7, 2002 Revised:
Page 3 of 6
MSDS #: PF1003-0101
MATERIAL SAFETY DATA SHEET Product Code: 7101A003(AA)
Personal Protection Equipment(s):
Required
Respiratory Protection:
Not Required
Eye/Face Protection: Required
Not Required
Required
Skin Protection:
Not Required
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Transparent roll film
None. But there may be a faint toluene odor by operating of the equipment.
Odor:
Not applicable
pH:
Not applicable
Boiling Point/Range(掳C):
Not available
Melting Point/Range(掳C):
Decomposition Temperature(掳C): Not available
Not available
Flash Point(掳C):
Flammable (Explosive) Limits: Not applicable
Autoignition Temperature(掳C): Not available
Not available
Flammability:
Not applicable
Explosive Properties:
None
Oxidizing Properties:
Not applicable
Vapor Pressure:
Not applicable
Vapor Density:
1.32
Density / Specific Gravity:
Water Solubility: Negligible
Not available
Fat Solubility:
Partition Coefficient (n-Octanol/Water): Not applicable
Percent Volatile: Not applicable
Not applicable
Evaporation Rate:
Not applicable
Viscosity (mPa s):
Date of Issue: June 7, 2002 Revised:
Page 4 of 6
MSDS #: PF1003-0101
MATERIAL SAFETY DATA SHEET Product Code: 7101A003(AA)
SECTION 10 STABILITY AND REACTIVITY
Stable
Stability:
Unstable
None
Conditions to Avoid:
Strong acid
Materials to Avoid:
Hazardous Decomposition Products: CO, CO2
May Occur
Hazardous Polymerization:
Will Not Occur
Conditions to Avoid: None
SECTION 11 TOXICOLOGICAL INFORMATION
Acute Toxicity:
Inhalation:
Not available
Ingestion:
Not available
Eye:
Not available
Skin:
Not available
Sensitization:
Not available
Mutagenicity:
Ames Test : Negative
(test strains : Salmonella typhimurium)
Reproductive Toxicity:
Not available
Carcinogenicity:
Not available
Others:
Not available
Date of Issue: June 7, 2002 Revised:
Page 5 of 6
MSDS #: PF1003-0101
MATERIAL SAFETY DATA SHEET Product Code: 7101A003(AA)
SECTION 12 ECOLOGICAL INFORMATION
Not available
Mobility:
Persistence / Degradability: Not available
Not available
Bioaccumulation:
Not available
Ecotoxicity:
Not available
Other Adverse Effects:
SECTION 13 DISPOSAL CONSIDERATION
Method of Disposal:
Disposal may be subject to federal, state and local laws.
SECTION 14 TRANSPORT INFORMATION
None
UN #:
UN Shipping Name: None
None
UN Classification:
UN Packing Group: None
Chemical name (wt%):
Marine Pollutant: Yes
No
Special Precautions: None
SECTION 15 REGULATORY INFORMATION
< EU Information >
Information on the Label:
Symbol & Indication: Not required
R-Phrase:
Not required
S-Phrase:
Not required
Dangerous Component(s):
None
Special Precautions under 1999/45/EC Annex V:
Not applicable
Specific Provisions in Relation to Protection of Man or the Environment:
Not regulated
76/769/EEC:
(EC)2037/2000: Not applicable
(EEC)2455/92: Not regulated
None
Others:
< USA Information >
Information on the Label:
Signal Word: Not required
Hazard warning:
Not required
Date of Issue: June 7, 2002 Revised:
Page 6 of 6
MSDS #: PF1003-0101
MATERIAL SAFETY DATA SHEET Product Code: 7101A003(AA)
Safety Advice:
Not required
Hazardous Component(s):
None
SARA Title III 搂313:
Chemical Name Weight %
None
California Proposition 65:
Chemical Name Weight %
None
< Canada Information >
Not applicable
WHMIS Controlled Product:
< Australia Information >
Statement of Hazardous Nature: Not applicable
SECTION 16 OTHER INFORMATION
None
Literature Reference:
- U.S. Department of Labor, 29CFR Part 1910
- U.S. Environmental Protection Agency, 40CFR Part 372
- U.S. Consumer Product Safety Commission, 16CFR Part 1500
- ACGIH, Threshold Limit Values for Chemical Substances and Physical Agents and Biological Exposure Indices
- U.S. Department of Health and Human Services National Toxicology Program, Annual Report on Carcinogens
- World Health Organization International Agency for Research on Cancer, IARC Monographs on the Evaluation on the Carcinogenic Risk of
Chemicals to Humans
- DFG, List of MAK and BAT Values
- EU Directive 76/769/EEC, 67/548/EEC, 1999/45/EC
- EU Regulation (EC)2037/2000, (EEC)2455/92
- Canada Workplace Hazardous Materials Information System
- Australia National Occupational Health and Safety Commission's Approved Criteria for Classifying Hazardous Substances [NOHSC:1008]
Abbreviations:
"EU" stands for European Union.
"OSHA PEL" stands for PEL(Permissible Exposure Limit) under Occupational Safety and Health Administration (USA).
"ACGIH TLV" stands for TLV(Threshold Limit Value) under American Conference of Governmental Industrial Hygienists.
"EU ILV" stands for Indicative Limit Values for Occupational Exposure under EU Directive 91/322/EEC and 2000/39/EC.
"DFG MAK" stands for MAK(Maximale Arbeitsplatzkonzentrationen) under Deutsche Forschungsgemeinschaft.
"TWA" stands for Time Weighted Average.
"IARC" stands for International Agency for Research on Cancer.
"NTP" stands for National Toxicology Program (USA).
"OSHA HCS" stands for Occupational Safety and Health Act, Hazard Communication Standard (USA).
"FHSA" stands for Federal Hazardous Substances Act (USA).
"WHMIS" stands for Workplace Hazardous Materials Information System.
"NOHSC" stands for National Occupational Health and Safety Commission Act 1985.
The information, data and recommendations set forth herein (the "Information") are presented in good faith and are believed to be correct as of the
date hereof. The company/manufacturer makes no representations as to the completeness or accuracy of the Information and disclaims
responsibility for any reliance thereon. The Information is provided upon the condition that the persons receiving same will make their own
determination as to its suitability for their purposes prior to use. Any use of the Information must be determined by the user to be in accordance
with applicable Federal, state and local laws and regulations. In no event will the company/manufacturer be responsible for damages of any
nature whatsoever resulting from the use or reliance upon the Information.
NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE WITH RESPECT TO THE INFORMATION OR THE PRODUCT
TO WHICH THE INFORMATION REFERS.
Date of Issue: June 7, 2002 Revised:
|