8137 Swenson Way, Delta, BC V4G 1J5
Phone: (604) 953-0093 Fax: (604) 953-0113
Toll Free: 1-877-952-0157
Web: www.concretech.com
Email: sales@concretech.com
ULTRABOND 580 (PART-B)
SECTION 01: PRODUCT IDENTIFICATION
Amines, Liquid, Corrosive
Product Identifier:
D-2B, Materials causing other toxic effects, E, Corrosive material
WHMIS Classification:
Crack Filler Grout / Putty.
Product Use:
UltraBond 580 Part B
Shipping Name:
Class 8, Corrosive material
Product Class:
UN 2735, Amines, liquid, Corrosive, N.O.S. (Trimethylhegxamethylenediamine
UN Number:
(TMD), Benzene-1,3- dimethaneamine, Paratertiarybutylphenol).
PG III
Packing Group:
N/A (mixture)
C.A.S. Number:
Concretech Decorative Concrete Supply Ltd.
Manufacturer鈥檚 Name:
Concretech Decorative Concrete Supply Ltd.
Supplier鈥檚 Name:
November, 25th, 2003
Preparation Date of MSDS:
rd
June 3 , 2004
Revision Date for MSDS:
Farhad Kazemian
MSDS Prepared By:
1-877-952-0157
Phone Number of Preparer:
SECTION 02: HAZARDOUS INGREDIENTS
Ingredients % CAS # LD/50 TLV Comments
1030 mg/kg/
2.0-5.0 2855-13-2 N/A
Isophoronediamine
(Oral rat)
910 mg/kg/
8.0-12.0 25620-58-0 N/A
Trimethylhegxamethylenediamine (TMD)
(Oral rat)
1230 mg/kg/
2.1-5.7 100-51-6 N/A
Benzyl Alcohol
(Oral rat)
3250 mg/kg/
8.2-13.5 98-54-4 N/A
Paratertiarybutylphenol
(Oral rat)
930 mg/kg/
2.7-8.1 1477-55-0 N/A
Benzene-1,3- dimethaneamine
(Oral rat)
SECTION 03: HAZARDOUS IDENTIFICATION
Route of entry:
May cause dryness, defatting, itching and / or rash. Contact of undiluted product cause severe
Skin contact:
irritation and pain. May cause burns, necrosis and permanent damage.
Product is adsorbed through skin. May cause nausea, headache and general discomfort.
Skin absorption:
May cause irritation. May cause conjunctivitis, mild corneal injury or other tissue damage.
Eye contact:
Severe respiratory tract irritant. May severely damage contacted tissue and produce scarring.
Inhalation:
Do not induce vomiting. Harmful or fatal if swallowed. Minute amounts aspirated into the lungs during
Ingestion:
swallowing or subsequent vomiting may cause dangerous bronchopneumonia or pulmonary edema.
N/A
Emergency Overview:
N/A
WHMIS Symbols:
Potential Health
N/A
Effects:
SECTION 04: FIRST AID MEASURES
Remove product and immediately flush with water for at least 15 minutes remove contaminated
Skin Contact:
clothing and shoe. Wash before reuse. Call a physician. Do not apply greases or ointments.
Flush with large quantities of water for 15 minutes, and seek medical attention.
Eye Contact:
Remove to the fresh air. Apply artificial respiration if breathing has ceased. If breathing is difficult give
Inhalation:
oxygen. Prevent aspiration of vomit. Turn victim head to the side. Contact physician.
Do not induce vomiting. Give large amount of water or milk if available and transport to medical
Ingestion:
facility.
SECTION 05: FIRE FIGHTING MEASURES
Not applicable
Flammable (yes / no)
Firefighters and others exposed to vapors or products of combustion should
Yes -
wear self-contained breathing apparatus.
Foam, dry chemical, carbon dioxide or any Class B extinguishing agent.
Water may be unsuitable as an extinguishing media, but helpful in keeping
Means of extinction
adjacent containers cool.
Over 93.3掳C TCC
掳
Flashpoint (掳C / Method)
N/A
Upper Flammable Limit (% by volume)
N/A
Lower Flammable Limit (% by volume)
8137 Swenson Way, Delta, BC V4G 1J5
Phone: (604) 953-0093 Fax: (604) 953-0113
Toll Free: 1-877-952-0157
Web: www.concretech.com
Email: sales@concretech.com
N/A
掳
Autoignition Temperature (掳C)
N/A
Explosion Data 鈥? Sensitivity to Impact
Explosion Data 鈥? Sensitivity to Static
Take precautionary measures against static discharges.
Discharge
May generate toxic or irritating combustion products. Oxides of carbon (CO,
Hazardous Combustion Products
CO2). Oxides of nitrogen. Ammonia.
N/A
NFPA
SECTION 06: ACCIDENTAL RELEASE MEASURES
Remove all sources of ignition. Wear protective equipment during cleanup. Ventilate area.
Keep spectators away. Floor may be slippery. Contain spill with inert material or
Leak and Spill Procedures:
absorbent such as sawdust, vermiculite or sand. Do not allow material to enter drain or
waterways.
SECTION 07: HANDLING AND STORAGE
Avoid prolonged or repeated inhalation of heated vapors or spray mists. Keep away from
Handling Procedures and
heat or open flame. Avoid all skin contact.
Equipment:
Keep containers closed. Store in a cool, well-ventilated area away from oxidizing agents,
other incompatible substances, and sources of ignition. Product is a static accumulator.
Storage Requirements:
Transfer equipment should be grounded or bonded.
SECTION 08: EXPOSURE CONTROL / PERSONAL PROTECTION
N/A
Exposure Limits: ACGIH TLV:
N/A
OSHA PEL:
N/A
OTHER:
General ventilation is required during normal use
Engineering Controls: General:
Local ventilation may be required during certain operations
Local Exhaust:
that generate fumes or spray mists.
N/A
Other:
Rubber Gloves
Personal Protective Equipment: Gloves
A canister type respirator may be necessary if spray mists or
fumes are generated. A NIOSH approved organic vapor mask
Respirator:
with a dust/mist pre-filter is recommended.
Safety Goggles
Eye:
Safety Shoes
Footwear:
Long Sleeve Cover-alls
Clothing:
N/A
Other:
SECTION 09: PHYSICAL AND CHEMICAL PROPERTIES
Paste
Physical State:
Ammoniac, Viscous gray paste.
Odor and Appearance:
N/A
Odor Threshold (ppm):
1.562
Specific Gravity:
N/A
Vapor Density (air=1):
N/A
Vapor Pressure (mmHg):
N/A
Evaporation Rate
N/A
Flammability Class:
205掳 C
Boiling Point 掳C:
N/A
Freezing Point 掳C:
0%
Volatile % by weight:
Alkaline
PH
Coefficient of Water/oil
N/A
Distribution:
N/A
Solubility in Water:
SECTION 10: STABILITY AND REACTIVITY
Stable
Chemical Stability:
Incompatibility with other
Do not mix with strong oxidizing agents, strong acids or bases, amines or halogens.
substances:
CAUTION! N-Nitrosamines, many of which are known to be powerful carcinogens, may
be formed when the product comes in contact with nitrous acid, nitrites, or atmospheres
with high concentrations of nitrous oxide. Product slowly corrodes copper, aluminum, zinc
Reactivity:
and galvanized surfaces. Reaction with peroxides may result in violent decomposition of
peroxide possibly creating an explosion. A reaction followed by a large heat release
8137 Swenson Way, Delta, BC V4G 1J5
Phone: (604) 953-0093 Fax: (604) 953-0113
Toll Free: 1-877-952-0157
Web: www.concretech.com
Email: sales@concretech.com
occurs when the product is mixed with acids.
Hazardous Decomposition
Carbon Dioxide, Carbon Monoxide, Nitrogen Oxides, Toxic Fumes.
Products:
SECTION 11: TOXICOLOGICAL INFORMATION
Contact of undiluted product with the eyes or skin quickly causes severe irritation and
Effects of Acute Exposure:
pain and may cause burns, necrosis and permanent injury.
Dryness of nasal passages may be experienced when material is inhaled over long
periods of time. Adverse eye effects (such as conjunctivitis or corneal damage). Adverse
Effects of Chronic Exposure:
respiratory effects (tightness of chest, cough, shortness of breath). Adverse skin effects
(such as defatting, rash, irritation or corrosion).
N/A
Irritancy of Product:
Allergic reaction/ sensitization may occur during repeated or prolonged contact with the
Skin Sensitization:
skin.
Excessive exposure to vapors or spray mists may cause headaches, nausea, vomiting,
Respiratory Sensitization:
dizziness and central nervous system depression.
N/A
Eye Sensitization:
N/A
Ingestion:
This material does not contain 0.1% or more of any substance that is listed as a
Carcinogenicity:
carcinogen by NTP, TARC or OSHA.
N/A
IARC (1, A2 or 2B
N/A
ACGIH (A1, A2or A3)
N/A
Reproductive Toxicity:
N/A
Teratogenicity:
N/A
Embryotoxicity:
N/A
Mutagenicity:
Name of Synergistic
N/A
Products/Effects:
SECTION 12: ECOLOGICAL INFORMATION
N/A
Aquatic Toxicity:
SECTION 13: DISPOSABLE CONSIDERATIONS
In accordance with municipal, provincial and federal regulations. Dispose in a permitted
Waste Disposal:
waste management facility.
SECTION 14: TRANSPORT INFORMATION
Shipping Name: UltraBond 580, Part B
Special Shipping Information:
UN 2735, Amines, liquid, Corrosive, N.O.S. (Trimethylhegxamethylenediamine (TMD),
PIN
Benzene-1,3- dimethaneamine, Paratertiarybutylphenol).
PGIII, Class 8, Corrosive material
TDG
N/A
DOT
N/A
IMO
N/A
ICAO
SECTION 15: REGULATORY INFORMATION
D-2B, Materials causing other toxic effects, E, Corrosive material
WHMIS Classification:
N/A
OSHA:
N/A
SERA:
N/A
TSCA:
All Raw Materials Listed.
DSL / TOSCA
SECTION 16: OTHER INFORMATION
Regulatory Information:
This material is not considered as a hazardous substance
SARA & WHMIS
as defined by SARA title 111 regulations (40 CFR 372).
Classification:
This material does not contain any substance that is
SARA SECTION 313
Subject to the reporting requirements of 40 CFR 372.
Listed Ingredients:
The above information is believed to be correct but does purport to be all inclusive and shall be used only as a guide. It is
provided solely for the customer鈥檚 consideration, investigation, and verification. Hereby specifically claims. It shall not be
held liable for any damage resulting from handling or from contact with the above products.
8137 Swenson Way, Delta, BC V4G 1J5
Phone: (604) 953-0093 Fax: (604) 953-0113
Toll Free: 1-877-952-0157
Web: www.concretech.com
Email: sales@concretech.com
|