MSDS: QuakeBond鈩? J200TC-B PAGE 1 OF 3 PAGES
QuakeWrap, Inc.
REV. DATE: 10/01/99 REV: 4
MATERIAL SAFETY DATA SHEET (MSDS)
Section 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: QuakeBond鈩? J200TC Tack Coat Hardener (Part 鈥淏鈥?)
CHEMICAL FAMILY: Polyethylenepolyamine Mixture
SUPPLIER鈥橲 NAME: QuakeWrap, Inc., P.O. Box 64757, Tucson, AZ 85728
EMERGENCY PHONE: 800/535-5053(Infotrac) GENERAL INFORMATION: (866) QuakeWrap [782-5397]
Section 2: COMPOSITION, INFORMATION ON INGREDIENTS
INGREDIENT % CAS # EXPOSURE LIMITS
Polyethylenepolyamine mixture 25-35 029320-38-5 N/E
Tetraethylenepentamine 5-10 112-57-2 N/E
TETA / TOFA reaction products 25-35 68082-29-1 N/E
Rubber Polymer 5-10 68683-29-4 N/E
Silicon Dioxide 1-5 112945-52-5 N/E
Benzyl Alcohol 5-10 100-51-6 N/E
TIO2 1-3 13463-67-7 N/E
Petroleum Distillates .1-1.5 64742-47-8 N/E *
(* 300 ppm supplier recommended)
Section 3: HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW: Epoxy hardener solution. Certain individuals may have pre-existing skin or
respiratory conditions causing a sensitivity or allergy which manifests as various reactions. Heating or
spraying this product or the mixed parts increases potential health hazards. Health and Safety personnel
should examine all handling procedures and remedy the existing and potential health and safety hazards.
POTENTIAL HEALTH EFFECTS:
EYE:
鈥? May cause irritation.
SKIN:
鈥? May cause irritation.
INGESTION:
鈥? May inflame or damage the G.I. tract. Ingestion may be harmful.
INHALATION:
鈥? May cause irritation.
CHRONIC EFFECTS:
鈥? Repeated exposure may cause irritation and sensitization.
SIGNS & SYMPTOMS:
鈥? Skin rash, irritation, reddening, or eczema; Breathing irritation or difficulty.
Section 4: FIRST AID MEASURES
鈾SE APPROPRIATE BLOOD-BORNE PATHOGENS PROTECTIONS鈾?
EYE:
鈥? Hold eyelids apart and flood with copious amounts of water. Seek medical attention.
SKIN:
ATTENTION: No representation is made as to the accuracy or correctness of the information contained herein, other
than to state that it is presented by this organization in good faith and we believe it to be correct and accurate per the
limits of our understanding and training as of the date of first publication. The user or handler of this product is warned
to take the most conservative and safest interpretation possible of all information contained herein and to use the
most extreme personal protection measures and exposure limitations prudently dictated by the specific usage or
handling situation, this MSDS information and good industrial safety and hygiene practices.
MSDS: QuakeBond鈩? J200TC-B PAGE 2 OF 3 PAGES
QuakeWrap, Inc.
REV. DATE: 10/01/99 REV: 4
鈥? Remove excess product. Wash thoroughly with soap and water. If irritation persists, seek
medical attention.
INGESTION:
鈥? Do not induce vomiting unless directed by medical personnel. Seek medical attention.
INHALATION:
鈥? Remove to fresh air. Seek medical attention.
Section 5: FIRE FIGHTING MEASURES
FLASH POINT: >138掳C >280掳F UEL: N.D.A.% LEL: N.D.A. VAPOR DENSITY: N.D.A.
NFPA FLAMMABILITY RATING: 1 AUTOIGNITION: N.D.A.
COMBUSTION PRODUCTS: CO, CO2, NOx, & misc. hydrocarbons
SPECIAL HAZARDS: Firefighters should wear butyl rubber boots, gloves, and body suit with SCBA. May
generate toxic and irritating combustion products. Use DOT Response Guide #153.
EXTINGUISHING MEDIA: Use foam, CO2, dry chemical, water fog.
FIRE FIGHTER INSTRUCTIONS: Stay upwind. Wear at least full bunker gear and SCBA.
Section 6: ACCIDENTAL RELEASE MEASURES
Wear appropriate personal protective equipment. Stop the leak and contain the spill. Vacuum, scoop, or
absorb spilled product with non-combustible materials. Clean up spill residues with soap and water.
Section 7: HANDLING AND STORAGE
Avoid skin and eye contact and breathing vapors or mists by appropriate measures. Do not eat or smoke
while handling this product. Wash thoroughly with mild soap and water after product handling or
exposure.
Store in original sealed container at ambient temperatures (65掳-80掳F) in dry, well-ventilated areas.
Section 8: EXPOSURE CONTROLS, PERSONAL PROTECTION
For Personal exposure Limits (PEL), Threshold Limit Values (TLV), or other exposure limits, see Sec.2.
GENERAL: Provide adequate ventilation that will keep airborne concentration at a minimum.
EYE/FACE: Safety glasses or splash goggles with face shield.
SKIN: Chemical resistant gloves. Don chemical resistant clothing where exposure may occur.
RESPIRATORY: NIOSH approved respirator with organic vapor/HEPA filter cartridges.
OTHER: Decontaminate or discard clothing and materials that have come in contact with this product.
Section 9: PHYSICAL AND CHEMICAL PROPERTIES
APPEARANCE: white paste ODOR: faint amine odor PHYSICAL STATE: liquid
VAPOR PRESS: N.D.A. SPECIFIC GRAVITY: 1.02 pH: alkaline
BOILING PT: N.D.A. MELT PT: N/A SOLUBILITY IN H2O: slight
Section 10: STABILITY AND REACTIVITY
ATTENTION: No representation is made as to the accuracy or correctness of the information contained herein, other
than to state that it is presented by this organization in good faith and we believe it to be correct and accurate per the
limits of our understanding and training as of the date of first publication. The user or handler of this product is warned
to take the most conservative and safest interpretation possible of all information contained herein and to use the
most extreme personal protection measures and exposure limitations prudently dictated by the specific usage or
handling situation, this MSDS information and good industrial safety and hygiene practices.
MSDS: QuakeBond鈩? J200TC-B PAGE 3 OF 3 PAGES
QuakeWrap, Inc.
REV. DATE: 10/01/99 REV: 4
CHEMICAL STABILITY: Stable.
INCOMPATIBILITY: Strong oxidizers, acids, epoxy resins in uncontrolled conditions; contact with other
unpolymerized monomers or polymers.
HAZARDOUS POLYMERIZATION: Will not occur.
HAZARDOUS DECOMPOSITION: None known, other than Sec. 5鈥檚 Combustion Products.
Section 11: TOXICOLOGICAL INFORMATION
Oral: N.D.A.
Dermal: N.D.A.
Inhalation: N.D.A.
Carcinogens under OSHA, ACGIH, NTP, IARC, or Other: None 鈮?0.1%
Section 12: ECOLOGICAL INFORMATION
N.D.A.
Section 13: DISPOSAL CONSIDERATIONS
Dispose of in accordance with applicable federal, state, and local laws and regulations.
Section 14: TRANSPORT INFORMATION
DOT: Not Regulated.
IATA:
IMO:
Section 15: REGULATORY INFORMATION
OSHA: 1910.1200 Hazardous Chemical 鈥淚rritant鈥?, 鈥淪ensitizer鈥?.
TSCA: Contains listed ingredients.
SARA III: Sec311 & 312 Immediate Health Hazard; Sec313 Chemicals above de minimus level: None.
CA PROP. 65 NOTICE: Not Listed
VOLATILE MATTER: Part 鈥淏鈥? = 0.0% Mixed Parts 鈥淎鈥?& 鈥淏鈥? = 0.0% EPA Method 24.
NFPA: HEALTH 2 FIRE 1 REACTIVITY 0 OTHER N/A
Section 16: CANADIAN REGULATORY INFORMATION
WHMIS: Hazard Classification: Class D Division 2B, Class D Division 2B Skin Sensitizer. Refer to MSDS
for specific warnings.
WHMIS Symbols: Stylized T.
WHMIS Trade Secret Registry Numbers: None.
ABBREVIATIONS: N/A = not applicable; N.D.A. = no data available; NE = not established
END OF MSDS
ATTENTION: No representation is made as to the accuracy or correctness of the information contained herein, other
than to state that it is presented by this organization in good faith and we believe it to be correct and accurate per the
limits of our understanding and training as of the date of first publication. The user or handler of this product is warned
to take the most conservative and safest interpretation possible of all information contained herein and to use the
most extreme personal protection measures and exposure limitations prudently dictated by the specific usage or
handling situation, this MSDS information and good industrial safety and hygiene practices.
|