Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: tapplastics_com---PB-IPS2007.asp
                                                       WELD-ON 2007
SOLVENT CEMENT FOR
RIGID AND FOAMED VINYL (PVC)



SUBSTRATE RECOMMENDATIONS
WELD-ON 2007 is formulated for rigid vinyl, and foamed PVC to themselves and to each other.

BONDING RECOMMENDATIONS
WELD-ON 2007 is recommended where a water-thin cement is desired. It is suitable and used on both large
assemblies and small delicate assemblies. These include a wide variety of items: signs, large displays, lighting
fixtures, housewares, electrical assemblies, decorator items and many other fabrications.

GENERAL DESCRIPTION
WELD-ON 2007 is a clear, water-thin, fast drying solvent. It may be applied by brush, syringe, spray, and most
any other method. It forms bonds by the softening and fusion of the two surfaces in contact. Bonds made with
WELD-ON 2007 cure rapidly. Cure is effected by dissipation of the solvent. Initial bond takes place within a few
minutes and is often of sufficient strength to permit handling of the bonded item. Relatively high strength is
reached in 24 to 48 hours and continues to increase for a number of weeks. Joined materials will generally have
the same rigidity or flexibility and other physical properties as prior to bonding.

1 Week
SUBSTRATE MATERIAL 2 Hours 24 Hours
PVC 400 PSI 800 PSI 1200 PSI

ADHESIVE PROPERTIES AND CHARACTERISTICS
COLOR: Clear
VISCOSITY: Water-Thin
WORKING TIME: 1 鈥? 2 minutes
FIXTURE TIME: 3 minutes
80% STRENGTH: 24 鈥? 48 hours
SPECIFIC GRAVITY: .85 卤 .040
COVERAGE Unknown, no way to determine

DIRECTIONS FOR USE
JOINT PREPARATION: Parts to be joined should fit without forcing. Surfaces should be clean and smooth.
鈥?
A good machine finish or sanding with 200-400 grit sandpaper should be satisfactory. Surfaces 鈥渁s molded
or extruded鈥? may not require additional preparation.
APPLICATION OF CEMENT: WELD-ON 2007 can be applied by brush, spray, pump type oil cans, syringe,
鈥?
eye dropper, saturated felt pad and other devices. Cement may be applied to one or both surfaces.
ASSEMBLY OF PARTS: Assemble while parts are still wet. If cement is applied to one surface, let the two
鈥?
surfaces be in gentle contact for a few seconds to allow the cement to soften the dry surface. Then press
parts together in firm contact. If both the parts have been coated, they may be brought firmly together
immediately. The application of pressure of 2 to 10 pounds per square inch should materially increase
bond strength. Spring loaded clothespins may be suitable as clamps. The length of time required for clamp
or jig pressure will vary. A few hours may be required for difficult joints and a few minutes for parts that fit
well and have modest load requirements.

SHELF LIFE
Three years expectancy in tightly sealed containers. Stability of the product is limited by the permanence of the
container and the evaporation of the solvent when container is open.




漏IPS Copyright 07/02
SHIPPING
Shipping Information for Individual Containers Larger than One Liter: DOT Shipping Name: Flammable
Liquid, n.o.s. (Methyl Ethyl Ketone, Tetrahydrofuran). DOT Hazard Class: 3. ID #: UN1993. Packaging Group: II.
Label: Flammable Liquid.
Shipping Information for Less than One Liter: DOT Shipping Name: Consumer Commodity. DOT Shipping
Class: ORM-D.

SAFETY AND ENVIRONMENTAL PRECAUTIONS
Weld-On 2007 is a flammable, fast evaporating, solvent cement. It is considered a hazardous material. In
conformance with the Federal Hazardous Substances Labeling Act, the following hazards and precautions are
given. Purchasers who may re-package this product must also conform to all local, state and federal labeling,
safety and other regulations.
DANGER! 鈥? EXTREMELY FLAMMABLE 鈥? VAPOR HARMFUL 鈥?
MAY BE HARMFUL IF SWALLOWED 鈥? MAY IRRITATE SKIN OR EYES
Keep out of reach of children. Do not take internally. Keep away from heat, spark, open flame and other sources
of ignition. Keep container closed when not in use. Store in the shade below 80潞F. Use only with adequate
ventilation. Avoid breathing of vapors. Atmospheric levels should be maintained below established exposure limit
values contained in Section II and VIII of the Material Safety Data Sheet. If airborne concentrations exceed those
limits, use of a NIOSH-approved organic vapor cartridge respirator with full face-piece is recommended. The
effectiveness of an air-purifying respirator is limited. Use it only for a single short-term exposure. For emergency
and other conditions where short-term exposure guidelines may be exceeded, use an approved positive pressure
self-contained breathing apparatus. Do not smoke, eat or drink while working with this product. Avoid contact with
skin, eyes and clothing. May cause eye injury. Protective equipment such as gloves, safety goggles and
impervious apron should be used. Carefully read Material Safety Data Sheets and follow all precautions. Contains
Tetrahydrofuran (109-99-9) and Methyl Ethyl Ketone (78-93-3). Do not use this product for other than intended
use.
"Title Ill Section 313 Supplier Notification": This product contains toxic chemicals subject to the reporting
requirements of Section 313 of the Emergency Planning and Community Right-to-Know Act of 1986 and of
40CFR372. This information must be included in all MSDS鈥檚 that are copied and distributed for this material.
FIRST AID
Inhalation: If ill effects from inhalation, remove to fresh air. If not breathing, give artificial respiration. If breathing is
difficult, give oxygen. Call physician.
Eye or Skin Contact: Flush with plenty of water for 15 minutes. If irritation persists, get medical attention.
Ingestion: If swallowed, do not induce vomiting. Contact physician immediately.

QUALITY ASSURANCE
Every batch of this cement is checked to assure that consistent quality is maintained. An infrared absorption curve
is recorded for each batch to ensure that this cement is properly formulated. Samples are taken from all batches
and kept for a period of at least one year. A batch identification code is stamped on each can.
IMPORTANT NOTE
This product is intended for use by skilled individuals at their own risk. These suggestions and data are based on
information we believe to be reliable. Users should verify by test that this product, as well as these methods, are
suited to their application. Since specific use, materials and handling are not controlled by IPS, our warranty is
limited to the replacement of defective IPS products.




_________________________________________________________________________________________________________________




I-2007

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
supercoproducts_com---MSDS-HURRICANE-A.asp 111-76-2 68476-86-8
surefootcorp_com---750_msds.asp 1336-21-6 7732-18-5 139497-04-4
sybronendo_com---SealapexBaseandCatalyst.asp N/A
sybronendo_com---TubliSealEWTBase.asp N/A
syngentacropprotection-us_com---Ordram15GM.asp N/A
syngentaprofessionalproducts_com---03_25071.asp 85-00-7
tapplastics_com---Briskheat.asp N/A
tapplastics_com---fiberglass_fabric_glossary.asp N/A
tapplastics_com---G00001.asp 25038-59-9 75-07-0
tapplastics_com---grdnpool.asp N/A
tapplastics_com---mekp_catalyst_ratios.asp N/A
tapplastics_com---MSDS_Acrylic_Sheet.asp N/A
tapplastics_com---PB-IPS16.asp N/A
tapplastics_com---PB-IPS2007.asp N/A
tapplastics_com---PB-IPS2354.asp N/A
tapplastics_com---PB-IPS3.asp N/A
tapplastics_com---pb09.asp N/A
tapplastics_com---pb15.asp N/A
tapplastics_com---pb16.asp N/A
tapplastics_com---pb17.asp N/A
tci_tdcj_state_tx_us---PURE-SAS.asp N/A
teamindustrialservices_com---802-0003_F-14_Fiber.asp 7440-43-9
technochemical_com---EN3925.asp 288-32-4
teckcominco_com---GALVA_GUARD_MSDS.asp 7440-66-6 7440-31-5 7440-50-8
tecodiag_com---178_MSDS_FSH-96.asp N/A
tecodiag_com---186_TC-151_User_Manual.asp N/A
tempcoat_com---msds.asp 12-02-0 68607-29-4 68424-85-1
thatchercompany_com---Calcium_Nitrite_MSDS.asp 13780-06-8
thcl_com_cn---T020.asp N/A
thcl_com_cn---T030.asp 111-76-2
the-scotts-exchange_com---91260.asp 15245-12-2 7487-88-9 10043-35-3 14025-15-1 15708-41-5 15375-84-5 13106-76-8 14025-21-9
thelaminexgroup_co_nz---Insulation_Board_MSDS_2007.asp N/A
thesoapkitchen_co_uk---MSDS_Mistletoe_Fragrance_Soap_Kitchen.asp 2050-08-0 6259-76-3 68039-49-6 84-66-2
thesoapkitchen_co_uk---MSDS_Rice_Bran_Oil_Soap_Kitchen.asp 68553-81-1
thestampstore_com---CS-100STAIN_MSDS.asp 7447-39-4 7664-38-2 7647-01-0 7732-38-2
threadlockers_com---541.asp 24448-20-2 27813-02-1 39382-25-7 80-15-9 81-07-2
thredtaper_com---thredtapeMSDS.asp 9002-84-0
timken_com---Conoco_HD_Calcium_Lube_529_-_10498.asp N/A
timtec_net---NPL400TimTec.asp N/A
tintometer_de---205697_-_Reference_Standard_Chlorine_4_mg_l_GB.asp 67-63-0 117-00-0 67-68-5
tintometer_de---215650-530_-_Verification_Standard_530_nm_GB.asp 67-68-5 1310-73-2 002-00-6
titanamerica_com---rcc_cement_kiln_dust.asp N/A
tnemec_com---m30.asp 25265-77-4 112-34-5 13463-67-7
tools_invitrogen_com---K1054.asp 67-68-5
tools_qa_invitrogen_com---56455_MTR-NAIV_EN.asp 67-68-5
tools_qa_invitrogen_com---98701.asp 67-68-5 77-86-1
tra-con_com---F253.asp 000112-57-2 013750-62-4 003236-53-1 003236-54-2
transdesign_com---MSDS-100.asp 7732-18-5 69430-24-6 5466-77-3 17955-88-3 25168-73-4 131-57-7 123-94-4 9004-99-3 111-01-3 9005-67-8 4191-73-5 4247-02-3 94-26-8 122-99-6
transportation_ky_gov---Stronghold_MSDS.asp N/A
tremcosealants_com---901874_805_C.asp 7631-86-9 57-55-6 13463-67-7 1897-45-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC