Modec, Inc. MATERIAL SAFETY DATA SHEET
WWW.DECONSOLUTIONS.COM PHONE: 303-287-0186
AUTHORIZED SANDIA LICENSEE MSDS NO: SNL872-500-0212
DISTRIBUTED FROM: 4725 OAKLAND ST. MSDS DATE: 12-02-04
DENVER, COLORADO 80239 REVISED: New
IDENTIFICATION, COMPOSITION AND INGREDIENTS
PRODUCT NAME: Modec Decon Formula 500Concentrate
BRAND: Modec Decon Formulation: "MDF-500" - Part A
COMPOSITION: Biodegradable mixture of cationic detergents and fatty alcohols
HAZARD RATING: Health: 1; Flammability: 0; Reactivity: 0. (NFPA)
ACTIVE INGREDIENTS: % OSHA PEL ACGIH
N,N,N,N',N'-Pentamethyl,N'-Tallow Alkyl 1,3-Propanamine Diammonium 2.1 Not Established
Chloride; n-Tallow Pentamethyl Propane (CAS 68607-29-4)
Quaternary Ammonium Compounds, Benzyl-C12-18 Alkyl Dimethyl 4.2 Not Established
(CAS 68424-85-1)
INERT INGREDIENTS 93.7
TOTAL 100
PHYSICAL DATA
APPEARANCE: Yellowish clear liquid SOLUBILITY IN WATER: Complete
ODOR: Sweet SPECIFIC GRAVITY: 1.056
EVAPORATION RATE: 1 (water=1) pH of CONCENTRATE: 10.6
VAPOR PRESSURE: Unknown BOILING POINT: 212掳 F.
FIRE AND EXPLOSION DATA
FLAMMABILITY: Not flammable
EXTINGUISHING MEDIA: As for surrounding fire
UNUSUAL FIRE AND EXPLOSION HAZARDS: None
SPECIAL FIR FIGHTING PROCEDURES: None
EXPLOSION LIMITS: N/A
FIRST AID EMERGENCY PROCEDURES
EYE CONTACT: Flush eye with cool running water for at least 15 minutes. Call a Physician.
SKIN CONTACT: Flush with cool running water. If irritation develops, call a Physician.
INGESTION: Drink promptly several glasses of water or milk. Call a Physician.
BREATHING: Move to fresh air. If breathing becomes heavy seek medical attention
SPECIAL PROTECTION INFORMATION
PROTECTIVE GLOVES: Recommended (rubber or PVC) when working with concentrate.
EYE PROTECTION: Recommended (goggles, safety glasses) when working with concentrate
LOCAL EXHAUST: None required for local exhaust, normal dilution ventilation is acceptable.
OTHER EQUIPMENT: None required
REACTIVITY DATA
INCOMPATIBLE MATERIALS: Anionic materials
STABILITY: Product is stable
POLYMERIZATION: Will not occur
DECOMPOSITION PRODUCTS: Thermal decomposition may give off nitrous oxides and ammoniac vapors and
carbon dioxide during a fire.
SPILL OR LEAK PROCEDURES AND DISPOSAL
SPILL: Contain spill; flush with large excess of water. Avoid large discharges; sorbents may be used.
DISPOSAL: Remove material or dispose in accordance with all applicable federal, state and local regulations.
Material collected with absorbent may be disposed of in permitted landfill
TRANSPORTATION INFORMATION
DOT: The product is non-hazardous under DOT Regulations. No special handling procedures are required.
ADDITIONAL INFORMATION
This MSDS may be required by law, but this is not an assertion that the substance is hazardous when used in accordance with proper
safety practices and normal handling procedures. Data supplied is for use only in connection with occupational safety and health.
The information contained herein has been compiled from sources considered by Modec, Inc. to be dependable and is accurate to the
best of the Company鈥檚 knowledge. No guarantee of accuracy is made. It is the user鈥檚 responsibility to determine the suitability of this
information for the adoption of necessary safety precautions and disposal considerations. The information relates to the specific
materials designated herein, and does not relate to the use in combination with any other material or other process. The listed hazard
data herein may reflect the hazards related to the formulation as a whole or to individual components at 100% concentration.
Therefore, certain warnings and hazard statements contained on this MSDS may not be applicable to or included in the package
labeling.
SARA requires submission of annual reports of release of toxic chemicals that appear in 40 CFR 372. This Information must be included
in all MSDS鈥檚 that are copied and distributed for this material. Components present in this product at a level which could require
reporting under the statute are: NONE
EMERGENCY TELEPHONE: INFOTRAC 1-800-535-5053
Modec, Inc. MATERIAL SAFETY DATA SHEET
WWW.DECONSOLUTIONS.COM PHONE: 303-287-0186
AUTHORIZED SANDIA LICENSEE MSDS NO: SNL872-500-0212
DISTRIBUTED FROM: 4725 OAKLAND ST. MSDS DATE: 12-02-04
DENVER, COLORADO 80239 REVISED: New
IDENTIFICATION, COMPOSITION AND INGREDIENTS
PRODUCT NAME: Stabilized Catalyst for MDF-500 Part B
BRAND: Modec Decon Formulation MDF-500 鈥? Part B
COMPOSITION: Stabilized Hydrogen Peroxide, water and inert ingredients
HAZARD RATING: Health: 0; Flammability: 0; Reactivity: 0. (NFPA)
ACTIVE INGREDIENTS: % TLV LIMIT IN AIR
Hydrogen Peroxide (7722-84-1) 7.99 1 ppm
Inert ingredients 92.01
TOTAL 100
PHYSICAL DATA
APPEARANCE: Clear liquid SOLUBILITY IN WATER: Complete
ODOR: Odorless SPECIFIC GRAVITY: 1.008 g/cm3
EVAPORATION RATE: 1 (water=1) pH of CONCENTRATE: 2.275
VAPOR PRESSURE: 23.3 MM HG @ 30 (C) BOILING POINT: 108 Celsius
MELTING POINT: -33
FIRE AND EXPLOSION DATA
FLAMMABILITY: Not flammable
EXTINGUISHING MEDIA: As for surrounding fire, water
UNUSUAL FIRE AND EXPLOSION HAZARDS: None
SPECIAL FIR FIGHTING PROCEDURES: None
EXPLOSION LIMITS: N/A
HEALTH HAZARD DATA 鈥揈FFECTS OF OVEREXPOSURE
ROUTES OF ENTRY: Eye contact, skin contact, ingestion, inhalation.
EYE EFFECT: May cause transient irritation. Rinse immediately with water
SKIN EFFECT: May be transiently irritating to skin. Will cause temporary whitening.
INGESTION: If swallowed, consult a physician. Do not induce vomiting. Drink a glass of water.
INHALATION: Avoid breathing mist. If inhaled, remove to fresh air. Give oxygen if breathing is difficult.
This product (or components of its mixture) is not listed in IARC Monographs, the NTP 6th Annual Report or
CARCINOGENICITY:
the current ACGIH TLV鈥檚 as a carcinogen or potential carcinogen.
FIRST AID EMERGENCY PROCEDURES
EYE CONTACT: Flush eye with cool running water for at least 15 minutes. Call a Physician.
SKIN CONTACT: Flush with cool running water. If irritation develops, call a Physician.
INGESTION: Drink promptly a glass of water. Call a Physician.
BREATHING: Move to fresh air. If breathing becomes heavy seek medical attention
SPECIAL PROTECTION INFORMATION
PROTECTIVE: If skin or contamination of clothing is likely, protective clothing should be worn.
EYE PROTECTION: Recommended (goggles, safety glasses).
RESPIRATORY: Atmospheric levels should be maintained below the exposure limits listed in Section
III by using engineering controls. If not feasible, use supplied air respirator.
LOCAL EXHAUST: Provide local exhaust, normal dilution ventilation is acceptable. Refer to Industrial
Ventilation by ACGIH for a manual of recommended practices.
OTHER EQUIPMENT: None required
REACTIVITY DATA
INCOMPATIBLE MATERIALS: Heavy metal ions, alkalis and combustible materials
STABILITY: Product is stable at normal temperatures and storage
POLYMERIZATION: Will not occur
DECOMPOSITION PRODUCTS: Oxygen which supports combustion.
SPILL OR LEAK PROCEDURES AND DISPOSAL
SPILL: Contain spill; flush with large excess of water. Avoid large discharges; sorbents may be used.
See prior sections for hazards and exposure controls. Dike with sand or earth to contain spill.
Avoid ignition sources. Transfer to approved DOT drum for recovery or disposal.
DISPOSAL: Remove material or dispose in accordance with all applicable federal, state and local regulations.
Material collected with absorbent may be disposed of in permitted landfill
TRANSPORTATION INFORMATION
DOT REGULATIONS: The product is non-hazardous under DOT Regulations. No special handling procedures are required.
ADDITIONAL INFORMATION
SARA requires submission of annual reports of release of toxic chemicals that appear in 40 CFR 372. This Information must be included in all MSDS鈥檚 that
are copied and distributed for this material. Components present in this product at a level which could require reporting under the statute are NONE. This
MSDS may be required by law, but this is not an assertion that the substance is hazardous when used in accordance with proper safety practices and normal
handling procedures. Data supplied is for use only in connection with occupational safety and health. The information contained herein has been compiled
from sources considered by Modec, Inc. to be dependable and is accurate to the best of the Company鈥檚 knowledge. No guarantee of accuracy is made. It is
the user鈥檚 responsibility to determine the suitability of this information for the adoption of necessary safety precautions and disposal considerations. The
information relates to the specific materials designated herein, and does not relate to the use in combination with any other material or other process. The
listed hazard data herein may reflect the hazards related to the formulation as a whole or to individual components at 100% concentration. Therefore,
certain warnings and hazard statements contained on this MSDS may not be applicable to or included in the package labeling.
EMERGENCY TELEPHONE: INFOTRAC 1-800-535-5053
|