Sartomer Company
Material Safety Data Sheet
Product: ESACURE KIP100F Revised Date: 01-17-2005
MSDS ID: S-000160 Replaces Date: 02-09-2001
01. GENERAL INFORMATION
Sartomer Company, Inc.
Oaklands Corporate Center
502 Thomas Jones Way
Exton, Pennsylvania 19341
Emergency phone numbers:
800/424-9300 (CHEMTREC)
610/692-8401 (Sartomer Co., Inc.)
Product information:
610/363-4100
GENERIC NAME
Alpha Hydroxy Ketone Blend
DOT PROPER SHIPPING NAME UN/NA NUMBER
N/AP N/AP
DOT HAZARD CLASS
Not regulated
02. SUMMARY OF HAZARDS
CAUTION
PHYSICAL HAZARDS: No significant hazards expected
ACUTE HEALTH EFFECTS: Suspect slight eye irritation hazard
(SHORT-TERM) Not expected to be a skin irritant based
on available data
Not a skin sensitization hazard based
on available data
Not expected to be a skin absorption hazard
Suspect slight inhalation hazard
Slight ingestion hazard
CHRONIC HEALTH EFFECTS: See Supplement section of MSDS for chronic health
(LONG-TERM) effects information.
03. COMPONENTS
COMPONENT NAME CAS NUMBER % COMPOSITION (BY WT.)
Oligo[2-Hydroxy-2-methyl-1-[4(1-methyl- EPA Accession AP 70
vinyl)phenyl]propanone] Number 117852
2-Hydroxy-2-methyl-1-phenylpropanone 7473-98-5 AP 30
04. PHYSICAL AND CHEMICAL DATA
BOILING POINT PH
GT 200C/392F N/DA
FREEZING POINT DRY POINT
N/DA N/AP
Date Printed: 01-17-2005 Page: 1 of 7
Sartomer Company
Material Safety Data Sheet
Product: ESACURE KIP100F Revised Date: 01-17-2005
MSDS ID: S-000160 Replaces Date: 02-09-2001
SPECIFIC GRAVITY (H20=1 AT 39.2F) VOLATILE CHARACTERISTICS
AP 1.1 at 20C/4C N/DA
VISCOSITY UNITS, TEMP. (Brookfield) SOLUBILITY IN WATER
AP 25,0000 cps at 20C/68F Insoluble
VAPOR PRESSURE STABILITY
N/DA Stable
VAPOR SP GR (AIR=1 AT 60 - 90F) HAZARDOUS POLYMERIZATION
N/AP Not expected to occur
APPEARANCE AND ODOR
Yellow, viscous liquid with faint characteristic odor
CONDITIONS AND MATERIALS TO AVOID
High temperatures, direct sunlight, ultraviolet radiation;
Strong oxidizers, acids, bases
HAZARDOUS DECOMPOSITION PRODUCTS
Acrid smoke-fumes/carbon monoxide/carbon dioxide and perhaps other toxic
vapors may be released during a fire involving this product.
05. OCCUPATIONAL EXPOSURE LIMITS
SUBSTANCE SOURCE DATE TYPE VALUE TIME
A PEL or TLV has not been established for this product
One manufacturer has established an internal exposure limit of 1 mg/m3 (8-hour
TWA) for the minor component of this product.
06. FIRE AND EXPLOSION
FLASH POINT METHOD=(PMCC) AUTOIGNITION TEMP. METHOD=
GT 110C/230F N/DA
FLAMMABLE LIMITS (% VOLUME IN AIR)
LOWER: N/DA UPPER: N/DA
FIRE AND EXPLOSION HAZARDS
Will release vapors when heated above flash point. If mixed with air, and
exposed to an ignition source, these vapors can burn in the open or explode
if confined. Vapors may be heavier than air and may travel along the ground
to an ignition source, resulting in a flash back to the source of the vapors.
Fine sprays/mists may be combustible at temperatures below normal flash
point.
EXTINGUISHING MEDIA
Dry chemical
CO2
Water spray
Foam
Water fog
Date Printed: 01-17-2005 Page: 2 of 7
Sartomer Company
Material Safety Data Sheet
Product: ESACURE KIP100F Revised Date: 01-17-2005
MSDS ID: S-000160 Replaces Date: 02-09-2001
SPECIAL FIREFIGHTING PROCEDURES
Do not enter fire area without proper protection. See Section 4 -
decomposition products possible. Fight fire from safe distance/protected
location. Heat/impurities may increase temperature/build pressure/rupture
closed containers, spreading fire, increasing risk of burns/injuries. Water
may be ineffective in firefighting due to low solubility. Use water
spray/fog for cooling. Pressure relief system may plug with solids,
increasing risk of overpressure. Notify authorities if liquid enters
sewer/public waters.
07. HEALTH HAZARDS
ROUTES OF EXPOSURE
INHALATION
Although no appropriate human or animal health effects data are known to
exist, this material is expected to be a slight inhalation hazard.
Inhalation overexposure may cause headache, weakness, dizziness or
intoxication, and may also cause respiratory tract irritation symptoms
such as cough, mucous production and shortness of breath.
EYE CONTACT -- PRIMARY ROUTE
Although no appropriate human or animal health effects data are known to
exist, this material is expected to cause slight eye irritation.
Symptoms of irritation may include excessive tearing, blinking and redness.
SKIN ABSORPTION
Although no appropriate human or animal health effects data are known to
exist, this material is not expected to be a health hazard by skin
absorption.
SKIN IRRITATION -- PRIMARY ROUTE
This material is not expected to cause skin irritation based on available
test data.
Based on available data, this material is not expected to cause skin
sensitization.
INGESTION
This material may be a slight health hazard if ingested in large quantities.
May cause neurological effects if ingested in large quantities.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE
No additional medical information found.
08. PROTECTIVE EQUIPMENT / CONTROL MEASURES
RESPIRATORY PROTECTION
If this material is handled at elevated temperature or under mist forming
conditions, NIOSH/MSHA approved respiratory protection equipment should be
used.
Date Printed: 01-17-2005 Page: 3 of 7
Sartomer Company
Material Safety Data Sheet
Product: ESACURE KIP100F Revised Date: 01-17-2005
MSDS ID: S-000160 Replaces Date: 02-09-2001
If exposure exceeds the occupational exposure limit, use NIOSH/MSHA approved
respiratory protection equipment as specified in the NIOSH/OSHA 1981
occupational health guidelines for chemical hazards.
EYE PROTECTION
Eye protection such as chemical splash goggles and/or face shield must be
worn when possibility exists for eye contact due to splashing or spraying
liquid, airborne particles, or vapor. Contact lenses should not be worn.
SKIN PROTECTION
Not normally considered a skin hazard. Where use can result in skin contact,
practice good personal hygiene. Wash hands and other exposed areas with mild
soap and water before eating, drinking, smoking and when leaving work.
ENGINEERING CONTROLS
If handling results in aerosol or vapor generation, local exhaust ventilation
is recommended.
OTHER HYGIENIC PRACTICES
Emergency eye wash fountains and safety showers should be available in the
immediate vicinity of any potential exposure.
OTHER WORK PRACTICES
Use good personal hygiene practices. Wash hands before eating, drinking,
smoking, or using toilet facilities. Promptly remove soiled clothing/wash
thoroughly before reuse. Shower after work using plenty of soap and water.
09. EMERGENCY AND FIRST AID
INHALATION
If overcome by exposure, remove victim to fresh air immediately. Give oxygen
or artificial respiration as needed. Obtain emergency medical attention.
Prompt action is essential.
EYE CONTACT
In case of eye contact, immediately rinse with clean water for 20-30 minutes.
Retract eyelids often. Obtain emergency medical attention if pain, blinking,
tears or redness persist.
SKIN CONTACT
Remove contaminated clothing as needed. Wash skin thoroughly with mild
soap/water. Flush with lukewarm water for 15 minutes. If sticky, use waterless
cleaner first.
INGESTION
If large quantity swallowed, give lukewarm water (pint) if victim completely
conscious/alert. Do not induce vomiting/risk of damage to lungs exceeds
poisoning risk. Obtain emergency medical attention.
EMERGENCY MEDICAL TREATMENT PROCEDURES
Treat symptomatically.
Date Printed: 01-17-2005 Page: 4 of 7
Sartomer Company
Material Safety Data Sheet
Product: ESACURE KIP100F Revised Date: 01-17-2005
MSDS ID: S-000160 Replaces Date: 02-09-2001
10. SPILL AND DISPOSAL
PRECAUTIONS IF MATERIAL IS SPILLED OR RELEASED
May contaminate water supplies/be toxic to aquatic life. Impound/recover
large land spill; soak up small spill with absorbent material (sand, earth).
Prevent flow to sewers/public waters. On water, contain/minimize dispersion
collect. Report per regulatory requirements.
WASTE DISPOSAL METHODS
When discarded in its purchased form, this product is not a RCRA hazardous
waste. However, it is the responsibility of the generator to determine at
the time of disposal whether the product meets the criteria of a hazardous
waste. Comply with all applicable federal, state and local regulations.
Waste disposal options include landfilling solids at permitted sites. Use
registered transporters.
11. ADDITIONAL PRECAUTIONS
HANDLING AND STORAGE PROCEDURES
Store containers in a dark location at room temperature. Storage temperature
should not exceed 35C/95F. Keep containers tightly closed and away from
heat, sparks, open flame, strong oxidizers, radiation. Prevent contamination
by foreign materials. Bond and ground containers before beginning transfer.
Electrical equipment should conform to the National Electric Code.
If crystallization appears, drums can be heated to 70C/158F (a few hours
in a hot room is ideal) to allow material to return to liquid state.
DECONTAMINATION PROCEDURES
Follow standard plant procedures or supervisor's instructions for
decontamination operations.
12. LABEL INFORMATION
USE STATEMENT
FOR INDUSTRIAL USE ONLY
SIGNAL WORD
CAUTION
PRECAUTIONARY MEASURES
DO NOT HANDLE NEAR HEAT, SPARKS, OR OPEN FLAME.
AVOID CONTACT WITH EYES, SKIN AND CLOTHING.
AVOID BREATHING VAPORS/AEROSOLS.
WASH THOROUGHLY AFTER HANDLING.
KEEP CONTAINER CLOSED WHEN NOT IN USE.
BEFORE USING PRODUCT, READ MATERIAL SAFETY DATA SHEET (MSDS).
13. SUPPLEMENT
NPCA - HMIS RATING
Health 1
Flammability 1
Reactivity 1
Date Printed: 01-17-2005 Page: 5 of 7
Sartomer Company
Material Safety Data Sheet
Product: ESACURE KIP100F Revised Date: 01-17-2005
MSDS ID: S-000160 Replaces Date: 02-09-2001
Personal protection** G
**Consider application/conditions of use when assigning personal protective
equipment.
CHRONIC HEALTH EFFECTS INFORMATION:
No chronic health effects data is available for this product as a whole.
However, chronic exposure to some ketones has been associated with
neurotoxic effects such as brain and central nervous system damage. In
addition, the major component of this product was mutagenic when tested in
the Ames assay; however, it was not mutagenic in the Chinese hampster ovary
cell or mouse forward lymphoma assays.
The minor component of this product was negative in the Ames assay.
A subchronic oral toxicity study performed with this component (oral gavage
in rats) showed liver cell enlargement and proliferation at 1000 mg/kg/day.
The No Observed Effect Level (NOEL) appeared to be 100 mg/kg/day.
REGULATORY INFORMATION
TSCA STATUS
TSCA status: All components of this product are listed, or excluded from
listing, on the United States Environmental Protection Agency Toxic Substances
Control Act (TSCA) inventory.
CALIFORNIA PROPOSITION 65
California Proposition 65 Information: This product contains, or may contain,
trace quantities of a substance(s) known to the state of California to cause
cancer and/or reproductive toxicity.
INTERNATIONAL STATUS
Australia (AICS): not included on inventory
Canada (DSL): not included on inventory
China (CECS): included on inventory
Europe (EINECS): included on inventory
Japan (ENCS): included on inventory
Korea (ECL): not included on inventory
Philippines (PICCS): not included on inventory
*Note - qualifiers and codes used in this MSDS
EQ = Equal; AP = Approximately; LT = Less Than; GT = Greater Than;
TR = Trace; UK = Unknown; N/AP = Not Applicable; N/P = No Applicable
Information Found; N/DA = No Data Available
14. DISCLAIMERS
Some of the information presented and conclusions drawn herein are from
sources other than direct test data on the product itself. The information in
this MSDS was obtained from sources which we believe are reliable. However,
the information is provided without any warranty, express or implied,
Date Printed: 01-17-2005 Page: 6 of 7
Sartomer Company
Material Safety Data Sheet
Product: ESACURE KIP100F Revised Date: 01-17-2005
MSDS ID: S-000160 Replaces Date: 02-09-2001
regarding its correctness. The conditions or methods of handling, storage, use
and disposal of the product are beyond our control and may be beyond our
knowledge. For this and other reasons, we do not assume responsibility and
expressly disclaim liability for loss, damage or expense arising out of or in
any way connected with the handling, storage, use or disposal of the product.
This MSDS was prepared and is to be used only for this product. If the
product is used as a component in another product, this MSDS information may
not be applicable. This MSDS has been prepared in accordance with the
requirements of the OSHA Hazard Communication Standard (29 CFR 1910.1200).
Date Printed: 01-17-2005 Page: 7 of 7
|