MATERIAL SAFETY DATA SHEET
MAXX SHINE ACTIVATOR - FAST Page: 1
6/1/2007
PRODUCT NAME: MAXX SHINE ACTIVATOR - FAST HMIS CODES: H F R P
5 STAR Part Number: FS-5142-4 2*3 0 G
================== SECTION I - MANUFACTURER IDENTIFICATION =================
MANUFACTURED FOR : ABI/Autobody Brands International
A division of IAMG/International Autobody Marketing Group
ADDRESS : 9419 E. SAN SALVADOR DR. SUITE 104
SCOTTSDALE, AZ 85258
EMERGENCY PHONE : (800)424-9300 (24 hrs.) DATE PRINTED : 6/1/2007
INFORMATION PHONE : 1-87-REFINISH PREPARER NAME: MSDS Coordinator
========== SECTION II - HAZARDOUS INGREDIENTS/SARA III INFORMATION =========
VAPOR PRESSURE WEIGHT
REPORTABLE COMPONENTS CAS NUMBER mm Hg @ TEMP PERCENT
------------------------------------------------------------------------------------------------------------------------
hexamethylene diisocyanate polymer 28182-81-2 N/A N/A 25%-35%
n-BUTYL ACETATE 123-86-4 8.4 68 F 28.86
ACGIH TLV TWA: 150 ppm
ACGIH TLV STEL: 200 ppm
OSHA VPEL TWA: 150 ppm
OSHA VPEL STEL: 200 ppm
isocyanate polymer 53880-05-0 20%-30%
* XYLENES 1330-20-7 5.10 68 F 2.14
ACGIH TWA 100 ppm
ACGIH STEL 150 ppm
OSHA TWA 100 ppm
OSHA STEL 150 ppm
* METHYL ISOBUTYL KETONE 108-10-1 16 68 F 1.65
OSHA TWA 50.000 ppm
OSHA STEL 75.000 ppm
ACGIH TWA 50.000 ppm
ACGIH STEL 75.000 ppm
n-AMYL ACETATE 628-63-7 4.88 77 F 1.35
OSHA PEL: 100 ppm TWA
ACGIH TLV: 50 ppm TWA
ACGIH STEL: 100 ppm
NIOSH REL: 100 ppm TWA
ethyl 3-ethoxypropionate 763-69-9 1.5 77 F 0%-10%
pseudocumene 95-63-6 1.58 68 F .65
ACGIH TLV: 25 ppm TWA
OSHA PEL: 25 ppm TWA
NIOSH: 25 ppm TWA
NIOSH: 125 mg/m3 TWA
{N120} isophorone diisocyanate 4098-71-9 .05 77 F .5644
.005PPM TLV
.005PPM PEL
{N120} hexamethylene diisocyanate 822-06-0 0.0003 77 F <1%
ACGIH TLV: 0.005 ppm TWA
ACGIH TLV: 0.34 mg/m3 TWA
NIOSH: 0.005 ppm TWA
NIOSH: 35 ug/m3 TWA
ETHYL BENZENE 100-41-4 5.1 68 F .4
OSHA PEL: 100 ppm TWA
ACGIH TVL: 100 ppm TWA
MATERIAL SAFETY DATA SHEET
Page: 2
MAXX SHINE ACTIVATOR - FAST
6/1/2007
o-xylene 95-47-6 5.20 68 F .11
ACGIH TWA 100 ppm
ACGIH STEL 150 ppm
OSHA TWA 100 ppm
NIOSH 100 ppm
m-xylene 108-38-3 8.3 68 F .11
ACGIH TWA 100 ppm
ACGIH STEL 150 ppm
OSHA TWA 100 ppm
NIOSH 100 ppm
PROPYL BENZENE 103-65-1 N/D N/D .07
p-xylene 106-42-3 8.60 68 F .03
ACGIH TWA 100 ppm
ACGIH STEL 150 ppm
OSHA TWA 100 ppm
NIOSH 100 ppm
TOLUENE 108-88-3 22 68 F 0%-5%
ACGIH TLV: 150 ppm STEL (SKIN)
ACGIH TLV: 50 ppm TWA (SKIN)
OSHA VPEL: 150 ppm STEL
OSHA VPEL: 100 ppm TWA
naphthalene 91-20-3 N/A N/A 0%-5%
FORMALDEHYDE 50-00-0 N/A N/A .0003
OSHA PEL: 0.75 ppm TWA
OSHA PEL: 2.00 ppm STEL
OSHA PEL: 0.5 ppm TWA ACTION LEVEL
ACGIH TLV: 0.3 ppm CEILING
* Indicates toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372.
N/A
=============== SECTION III - PHYSICAL/CHEMICAL CHARACTERISTICS ============
BOILING RANGE: 201.2 F - 334.4 F SPECIFIC GRAVITY (H2O=1): 1.03
VAPOR DENSITY: Heavier than air EVAPORATION RATE: Slower than ether
V.O.C. grams/liter: 400.97 V.O.C. lbs./gal.: 3.35
SOLUBILITY IN WATER: Insoluble SOLIDS BY VOLUME: 54.696
APPEARANCE AND ODOR: Clear liquid with organic solvent odor
================= SECTION IV - FIRE AND EXPLOSION HAZARD DATA ==============
FLASH POINT: 45 F METHOD USED: TAGCC
FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: 0.9 UPPER: 15.0
EXTINGUISHING MEDIA: Foam, Carbon Dioxide, Dry Chemical, Water Fog
SPECIAL FIREFIGHTING PROCEDURES
Full protective equipment, including self contained breathing apparatus, is recommended. Water from fog nozzles may be
used to cool closed containers to prevent pressure build up.
UNUSUAL FIRE AND EXPLOSION HAZARDS
When heated above flashpoint, emits flammable vapors which, when mixed with air, can burn or become explosive. Fine
mists or sprays may be flammable below the flash point.
MATERIAL SAFETY DATA SHEET
Page: 3
MAXX SHINE ACTIVATOR - FAST
6/1/2007
======================== SECTION V - REACTIVITY DATA =======================
STABILITY: Stable
CONDITIONS TO AVOID
Avoid all sources of ignition
INCOMPATIBILITY (MATERIALS TO AVOID)
Water, strong acids, bases, alcohols, amines and oxidizing materials
HAZARDOUS DECOMPOSITION OR BYPRODUCTS
Carbon Dioxide, Carbon Monoxide and Isocyanate vapors.
HAZARDOUS POLYMERIZATION: Will not occur
==================== SECTION VI - HEALTH HAZARD DATA =======================
INHALATION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
May cause nose and throat irritation. Repeated and prolonged exposure to organic solvents may lead to permanent brain
and nervous system damage. Eye watering, headaches, nausea, dizziness, and loss of coordination are signs that solvent
levels are too high. Exposure to isocyanates may cause sensitization. This effect may be permanent. Repeated exposure to
isocyanates may result in a decrease in lung function that may be permanent.
Individuals with breathing problems or have had a prior reaction to isocyanates must not be exposed to this product. If
affected by inhalation, remove to fresh air. If breathing difficulty persists, consult a physician.
SKIN AND EYE CONTACT HEALTH RISKS AND SYMPTOMS OF EXPOSURE
May cause irritation or burning of the eyes. Repeated and prolonged skin contact may cause skin irritation or
dermatitis. In case of eye contact, immediately flush eyes with plenty of water for at least 15 minutes; call a
physician. In case of skin contact, wash with soap and water. If irritation occurs, contact a physician.
INGESTION HEALTH RISKS AND SYMPTOMS OF EXPOSURE
Gastrointestinal distress. In the unlikely event of ingestion, call a physician immediately and have the names of all
ingredients available.
HEALTH HAZARDS (ACUTE AND CHRONIC)
ACUTE- Dizziness, irritation of the respiratory tract, weakness, nausea, or possible narcosis or even asphyxiation. May
be accompanied by coughing, labored breathing, tightness in chest, and asthma-like symptoms.
CHRONIC- Overexposure to isocyanates can lead to lung sensitation and allergic respiratory reaction. Effects may be
permanent. Allergic reaction may occur in sensitized individuals at below recommended exposure limit. Reports have
linked organic solvents with brain and nervous system damage.
CARCINOGENICITY: NTP CARCINOGEN: Yes IARC MONOGRAPHS: Yes
PROPOSITION 65 STATEMENT: WARNING! This product contains a chemical or chemicals known to the state of California to
cause cancer and/or birth defects or other reproductive harm.
OSHA REGULATED: Yes
MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE
Do not use this product if you have chronic lung or breathing problems, or if you have ever had a reaction to
isocyanates.
MATERIAL SAFETY DATA SHEET
Page: 4
MAXX SHINE ACTIVATOR - FAST
6/1/2007
EMERGENCY AND FIRST AID PROCEDURES
If ingestion, or any type of overexposure or symptoms of overexposure occur during the use of this product, contact a
poison control center, emergency room or physician immediately; have material safety data sheet available.
=========== SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE ============
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Remove all sources of ignition (sparks, flames, and hot surfaces). Avoid breathing vapors. Ventilate area. Remove with
an inert absorbent and non-sparking tools.
WASTE DISPOSAL METHOD
Dispose in accordance with state ,federal and local regulations. Do not incinerate closed containers.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING
Keep containers tightly closed in a cool, dry, well ventilated area away from all possible ignition sources. Store large
quanties of material in buildings designed for the storage of flammable liquids.
OTHER PRECAUTIONS
Employees should be trained in safety measures that should be taken when using this product.
===================== SECTION VIII - CONTROL MEASURES ======================
RESPIRATORY PROTECTION
Avoid breathing vapors or spray mist. Wear a properly fitted respirator approved by NIOSH/MSHA (TC-23c) for use with
paints during application and until all vapors are exhausted. In confined areas, or where continuous spray operations
are typical, or proper respirator fit is not possible, wear a positive-pressure supplied air respirator (TC-19c). In all
cases follow respirator manufactures directions for respirator use. Do not allow anyone without protection into the
painting area.
VENTILATION
Provide sufficient ventilation to keep contaminates below applicable OSHA requirements.
PROTECTIVE GLOVES
Neoprene gloves impervious to organic solvents are recommended.
EYE PROTECTION
Use safety eyewear designed to protect against liquid splash.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT
Impervious coveralls are recommended.
WORK/HYGIENIC PRACTICES
Eye wash and safety showers in the work place are recommended. Wash hands before eating and smoking.
========================= SECTION IX - DISCLAIMER ==========================
The information contained in this material safety data sheet is information from our suppliers and other sources. It is
believed to be reliable. This data is not to be taken as a warranty or representation for which this company assumes
legal responsibility.
|