5 Star
Material Safety Data Sheet
1. PRODUCT AND COMPANY IDENTIFICATION
Material Identification
Product ID: 5162
Product Name: XTREME FAST ACTIVATOR
Product Use: Paint product.
Print date 21/Dec/2006
Revision Date 27/Oct/2005
Company Identification
ABI/Autobody Brands International, A division of IAMG/International Autobody Marketing Group
9419 E. San Salvador Dr. Suite 104
Scottsdale, AZ 85258
Information Phone: 1-87-REFINISH
24-Hour Medical Emergency
Phone: (800) 424-9300
2. COMPOSITION / INFORMATION ON HAZARDOUS INGREDIENTS
Common Name Approx. Chemical name
CAS-No. Weight %
PROPRIETARY RESIN 55 - 60 PROPRIETARY RESIN
METHYL ISOBUTYL 20 - 25 Methylisobutyl ketone
KETONE
108-10-1
METHYL PROPYLKETONE 5 - 10 Methylpropyl ketone
107-87-9
BUTYL ACETATE 1-5 n-Butyl acetate
123-86-4
AROMATIC NAPHTHA, 1-5 Petroleum naphtha, light aromatic
LIGHT
64742-95-6
1,2,4-TRIMETHYLBENZENE 1-5 PSEUDO CUMENE
95-63-6
If this section is blank there are no hazardous components per OSHA guidelines.
3. HAZARDS IDENTIFICATION
Primary Routes of Exposure:
Inhalation
Ingestion
Skin absorption
Emergency Overview:
This section not in use.
This product contains ingredients that may contribute to the following potential acute health effects:
Product ID: 5162
Page 1 / 7
Inhalation Effects:
Harmful if inhaled. May affect the brain, nervous system, or respiratory system, causing dizziness, headache, nausea or
respiratory irritation.
Eye Contact:
May cause eye burns.
Skin Contact:
Contains a component which is a known or suspected skin sensitizer.
Acute Ingestion:
May be harmful if swallowed.
Other Effects:
May cause kidney damage. May cause liver damage.
This product contains ingredients that may contribute to the following potential chronic health effects:
Notice: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain
and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful
or fatal. Overexposures may cause certain individuals to develop isocyanate sensitization which causes a reaction in
isocyanates below the TLV. Chronic overexposure to isocyanates may cause lung damage which may be permanent.
Effects may be permanent. Overexposure may cause allergic respiratory reaction. May cause eye damage and pain.
Possible sensitization.
See Section 11 for toxicological information about Mutagens, Teratogens and Carcinogens.
If this section is blank, no information is available.
4. FIRST AID MEASURES
Inhalation:
If affected by inhalation, move victim to fresh air. If symptoms persist, seek medical attention.
Eye Contact:
In case of contact, or suspected contact, immediately flush eyes with plenty of water for at least 15 minutes and get
medical attention immediately after flushing.
Skin Contact:
In case of contact, immediately flush skin with plenty of soap and water for at least 15 minutes. If irritation persists get
medical attention.
Ingestion:
If swallowed, get medical attention immediately. If swallowed , do not induce vomiting. Give large quantities of water. If
available, give several glasses of milk. Never give anything by mouth to an unconscious person. Get medical attention
immediately.
Medical conditions aggravated by exposure: Any respiratory or skin condition.
5. FIRE FIGHTING MEASURES
Flash point (Fahrenheit): 46潞 F ( 8潞 C) TCC/PM
Lower explosive limit: 1%
Upper explosive limit: 9%
Autoignition temperature: Not available. 潞 F ( 潞 C)
Sensitivity to impact: No.
Sensitivity to static discharge: Subject to static discharge hazards. Please see bonding and
grounding information in Section 7.
Hazardous combustion products: See Section 10.
Product ID: 5162
Page 2 / 7
Unusual fire and explosion hazards:
None known.
Extinguishing media:
Carbon dioxide, dry chemical, foam and/or water fog.
Fire fighting procedures:
Use water spray to cool nearby containers and structures exposed to fire.
6. ACCIDENTAL RELEASE MEASURES
Action to be taken if material is released or spilled:
Ventilate area. Avoid breathing of vapors. Use self-containing breathing apparatus or airmask for large spills in a
confined area. Wipe, scrape or soak up in an inert material and put in a container for disposal. See section 5, "Unusual
Fire and Explosion Hazards", for proper container and storage procedures. Remove sources of ignition. Remove with
inert absorbent and non sparking tools. Avoid all personal contact.
7. HANDLING AND STORAGE
Precautions to be taken in handling and storage:
Keep away from heat, sparks, and flames. Keep container closed when not in use. Do not store above 120 degrees F.
(49 degrees C). Based on flash point and vapor pressure, suitable storage should be provided in accordance with OSHA
regulation 1910.106, Ontario OH&S regulation 851 section 22. Empty containers may contain product residue, including
flammable or explosive vapors. Do not cut, puncture or weld on or near container. All label warnings must be observed
until the container has been commercially cleaned or reconditioned. If the product is used near or above the flashpoint,
an ignition hazard may be present. Activities, uses, or operations which liberate vapor (such as mixing or free fall of
liquids) may also present an ignition hazard. Please ensure containers and other interconnected equipment are properly
bonded and grounded at all times.
8. PERSONAL PROTECTIVE EQUIPMENT AND EXPOSURE CONTROLS
Personal Protective Equipment
Eye and face protection:
Avoid contact with eyes. Wear chemical goggles if there is the possibility of contact or splashing in the eye.
Skin protection:
Gloves: Neoprene or other nonporous. Neoprene or plastic apron and protective clothing covering exposed skin areas.
Respiratory protection:
If exposure cannot be controlled below applicable limits, use the appropriate NIOSH approved respirator such as an air
purifying respirator with organic vapor cartridge and dust/mist filter. Consult the respirator manufacturer's literature to
ensure that the respirator will provide adequate protection. Read and follow all respirator manufacturer's instructions.
Ventilation
Required when spraying or applying in confined area. Ventilation equipment should be explosion proof. Eliminate
ignition sources.
Exposure Guidelines
OSHA Permissible Exposure Limits (PEL's)
Common Name Approx. TWA (final) Ceilings limits (final) Skin designations
CAS-No. Weight %
METHYL ISOBUTYL 20 - 25 410 mg/m鲁 100 ppm
KETONE
108-10-1
METHYL PROPYLKETONE 5 - 10 700 mg/m鲁 200 ppm
107-87-9
Product ID: 5162
Page 3 / 7
Common Name Approx. TWA (final) Ceilings limits (final) Skin designations
CAS-No. Weight %
BUTYL ACETATE 1-5 710 mg/m鲁 150 ppm
123-86-4
ACGIH Threshold Limit Value (TLV's)
Common Name Approx. TWA STEL Ceiling limits Skin designations
CAS-No. Weight %
METHYL ISOBUTYL 20 - 25 50 ppm 75 ppm
KETONE
108-10-1
METHYL PROPYLKETONE 5 - 10 200 ppm 250 ppm
107-87-9
BUTYL ACETATE 1-5 150 ppm 200 ppm
123-86-4
1,2,4-TRIMETHYLBENZENE 1-5 25 ppm
95-63-6
Common Name Approx. Supplier Recommeded
CAS-No. Weight %
PROPRIETARY RESIN 55 - 60 Supplier recommended 0.5 mg/m3 TWA and 1.0 mg/m3 STEL.
If this section is blank, no information is available.
9. PHYSICAL PROPERTIES
Odor: Normal for this product type.
Physical State: Liquid
pH: Not determined.
Vapor pressure: 28 mmHG @ 68潞 F ( 20潞 C)
Vapor density (air = 1.0): 4.3
Boiling point: 213潞 F ( 101潞 C)
Solubility in water: Insoluble.
Coefficient of water/oil distribution: Not determined.
Density (lbs per US gallon): 8.32
Specific Gravity 1
Evaporation rate (butyl acetate = 1.0): 2.3
10. STABILITY AND REACTIVITY
Stability unstable
Conditions to Avoid: Heat. Heat or contact with peroxides or other catalysts.
Incompatibility: Strong oxidizers.
Hazardous Polymerization: May occur.
Hazardous Decomposition Products: Carbon monoxide and carbon dioxide. Nitrogen
compounds.
Sensitivity to static discharge: Subject to static discharge hazards. Please see bonding and
grounding information in Section 7.
11. TOXICOLOGICAL INFORMATION
Product ID: 5162
Page 4 / 7
11. TOXICOLOGICAL INFORMATION
Mutagens:
Teratogens:
Carcinogens:
If this section is blank, no information is available.
12. ECOLOGICAL DATA
Not available at this time.
13. DISPOSAL CONSIDERATIONS
Disposal should be made in accordance with federal, state and local regulations.
14. TRANSPORTATION INFORMATION
U.S. Department of Transportation
Proper Shipping Name: PAINT
Hazard Class: 3
UN ID Number: UN1263
Packing Group: II
49 CFR Hazardous Material Regulations Parts 100-180
The supplier will apply the combustible liquid exception in 49 CFR 173.150(f), limited quantity or "does not sustain
combustion" exceptions and consumer commodity rules, when authorized. Please check 49 CFR Parts 100-180 to
determine if the use of these exceptions applies to your shipments when re-shipping our products.
International Air Transport Association:
Proper Shipping Name: PAINT
Hazard Class: 3
UN ID Number: UN1263
Packing Group: II
International Maritime Organization:
Proper Shipping Name: PAINT
Hazard Class: 3
Non-Bulk UN ID Number: UN1263
Packing Group: II
15. REGULATORY INFORMATION
U.S. FEDERAL REGULATIONS:
Common Name Approx. SARA 302 SARA 313 CERCLA RQ in lbs.
CAS-No. Weight %
METHYL ISOBUTYL 20 - 25 form R reporting required 5000
KETONE for 1.0% de minimis
108-10-1 concentration
BUTYL ACETATE 1-5 5000
123-86-4
Product ID: 5162
Page 5 / 7
Common Name Approx. SARA 302 SARA 313 CERCLA RQ in lbs.
CAS-No. Weight %
1,2,4-TRIMETHYLBENZENE 1 - 5 form R reporting required
95-63-6 for 1.0% de minimis
concentration
SARA 311/312 Hazard Class:
Acute: Yes
Chronic: Yes
Flammability: Yes
Reactivity: No
Sudden Pressure: No
U.S. STATE REGULATIONS:
Pennsylvania Right To Know:
METHYL ISOBUTYL KETONE 108-10-1
BUTYL ACETATE 123-86-4
PROPRIETARY RESIN Trade Secret
AROMATIC NAPHTHA, LIGHT 64742-95-6
1,2,4-TRIMETHYLBENZENE 95-63-6
METHYL PROPYLKETONE 107-87-9
Additional Non-Hazardous Materials
PROPRIETARY ADDITIVE Trade Secret
Rule 66 status of product Photochemically reactive.
INTERNATIONAL REGULATIONS - Chemical Inventories
TSCA Inventory: All components of this product are in compliance with U.S.
TSCA Chemical Substance Inventory Requirements.
Canada Domestic Substances List: All components of this product are listed on the Domestic
Substances List.
16. OTHER INFORMATION
HMIS Codes
Health: 2
Flammability: 3
Reactivity: 2
PPE: X - See Section 8 for Personal Protective Equipment (PPE).
Abbreviations:
OSHA - Occupational Safety and Health Administration, IARC - International Agency for Research on Cancer, NIOSH -
National Institute of Occupational Safety and Health, NTP - National Toxicology Program, ACGIH - American Conference
of Governmental Industrial Hygienists, SCAQMD - South Coast Air Quality Management District, TSCA - Toxic
Substances Control Act, IATA - International Air Transport Association, IMO - International Maritime Organization, DOT -
Department of Transportation, NA - Not applicable, NOT ESTAB - Not established, N.A.V. - Not available, RQ -
Reportable quantity, WT - Weight, MG/CU M - Milligrams per cubic meter, G/L - Grams per liter, MM - Millimeters,
MPPCF - Millions of particles per cubic foot, PPM - parts per million, PPT - parts per thousand, TCC/PM - Tag closed
cup / Pensky-Martens, PB - Lead, PEL - Permissible exposure level, TWA - Time Weighted Average, STEL - Short term
exposure limit, C - Celsius, F - Fahrenheit.
Product ID: 5162
Page 6 / 7
Disclaimer:
The data on this sheet represent typical values. Since application variables are a major factor in product performance, this
information should serve only as a general guide. ABI assumes no obligation or liability for use of this information.
UNLESS ABI AGREES OTHERWISE IN WRITING, ABI MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, AND DISCLAIMS ALL IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR USE OR FREEDOM FROM PATENT INFRINGEMENT. ABI WILL NOT BE
LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Your only remedy for any defect in this
product is the replacement of the defective product, or a refund of its purchase price, at our option. This MSDS contains
additional information required by the state of Pennsylvania.
Product ID: 5162
Page 7 / 7
|