AD309 Part 1 page 1
MATERIAL SAFETY DATA SHEET
SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Material Identification: MicroGuard AD309 Multiple Surface Protector (Part 1)
Adsil 386-445-8239 Phone
P.O. Box 353880 386-445-0471 FAX
Palm Coast, FL 32135-3880 CHEMTREC: 1-800-424-9300
SECTION 2: OSHA HAZARDOUS COMPONENTS
CAS Number Wt% Components Exposure Limits
67-63-0 84 - 88 Isopropyl Alcohol TWA 400 ppm, STEL 500 ppm
1185-55-3 4-6 Not Established
Methyltrimethoxysilane
2996-92-1 4-6 Not Established
Phenyltrimethoxysilane
2530-83-8 <1 Not Established
Propyltrimethoxysilane
68412-37-3 <1 Diethoxysiloxane TWA 50 ppm
5593-70-4 <1 Tetrabutyl Titanate Not Established
1305-62-0 <1 Calcium Hydroxide TWA N/A, PEL 5 mg/m3
NFPA/HMIS Code: Health 1, Flammability 3, Reactivity 0
SECTION 3: PHYSICAL DATA FOR MATERIAL
pH: N/A (non-aqueous)
Solubility in water: Complete
Appearance: Clear Liquid
Odor: Moderate
Specific Gravity @ 25C: 0.91
VOC: Not Applicable
SECTION 4: FIRE AND EXPLOSION HAZARD OF MATERIAL
FLASH POINT: 53.0 degrees F. / 11.7 degrees C.
EXTINGUISHING MEDIA: Carbon Dioxide (CO2), Water Fog, Dry Chemical.
FIRE FIGHTING PROCEDURES: Self-contained breathing apparatus and protective clothing should
be worn in fighting fires involving chemicals. Heat exposure pressurizes closed containers. Cool with
water-spray. Evacuate the area in cases of overheating or fire.
SECTION 5: HEALTH AND HAZARD DATA
EYE CONTACT: Causes eye irritation.
SKIN CONTACT: May cause skin irritation.
INHALATION: Spray mist may cause irritation.
INGESTION: Irritation to gastrointestinal tract, causing abdominal pain and vomiting.
SIGNS AND SYMPTOMS OF EXPOSURE: Burning pain in the nose and throat (inhalation), pain,
redness, and tearing (eye exposure), itching or burning (skin exposure).
SPECIAL HAZARDS: Carcinogens - none known Mutagens 鈥? none known
Teratogens - none known Reproductive Toxins 鈥? none known
SECTION 6: FIRST AID MEASURES
AD309 Part 1 page 2
Eye: Immediately flush with water for 15 minutes. Get medical attention.
Skin: No first aid should be needed.
Inhalation: Remove to fresh air. Get medical attention if ill effects persist.
Oral: Get immediate medical attention. Do not induce vomiting. Administer 1 pint of water to
dilute material. Do not administer liquid if victim is unconscious. Lie down, keep warm
and cover eyes to exclude light.
SECTION 7: REACTIVITY DATA
Stability: Stable
Hazardous Polymerization: Hazardous polymerization will not occur.
Conditions to Avoid: None
SECTION 8: LEAK OR SPILL INFORMATION
Containment/Clean-up: Disposal of collected product, residues, and cleanup materials may be
governmentally regulated. Observe all applicable local, state, and federal
waste management regulations. Remove possible ignition sources and if
needed, use non-sparking tools and equipment. To prevent possible
spontaneous combustion, store rags, mops, absorbent, etc., used during
cleanup only in appropriate containers or covered with water. Mop, wipe, or
soak up with absorbent material and contain for salvage or disposal. For large
spills, provide diking or other appropriate containment to keep material from
spreading. Clean any remaining slippery surfaces by appropriate techniques,
such as; washing with mild, caustic detergents or solutions; or high-pressure
steam for large areas. Observe any safety precautions applicable to the
cleaning material used.
SECTION 9: SPECIAL PROTECTION INFORMATION
Respiratory Protection: Use respiratory protection for interior applications, unless adequate local exhaust
ventilation is provided or air-sampling data show exposures are within
recommended exposure guidelines. Industrial hygiene personnel can assist in
judging the adequacy of existing engineering controls.
Gloves: Washing at mealtime and end of shift. Wear latex gloves if skin is sensitive.
Eye Protection: Safety glasses at a minimum.
Protective Equipment: Safety eyewash station (bottle) should be within direct access.
Personal Hygiene: Do not get in eyes. Avoid contact with skin or clothing. Wash thoroughly,
after handling. Wash contaminated clothing before reuse.
SECTION 10: TRANSPORT INFORMATION
AD309 Part 2 page 3
DOT Information: (49CFR 172.101)
Proper Shipping Name: FLAMMABLE LIQUID, n.o.s.
Hazard Technical Name: (CONTAINS ISOPROPANOL)
Hazard Class: 3
UN Number: UN1993
Packing Group: II
SECTION 11: HANDLING & STORAGE
Handling: No special precautions.
Storage: Keep container away from heat, sparks and open flame. Store
away from water or moisture.
SECTION 12: REGULATORY INFORMATION
EPA SARA TITLE III CHEMICAL LISTINGS:
Sections 304 CERCLA Extremely Hazardous Substance:
None
Section 304 CERCLA Hazardous Substances:
None
Section 312 Hazard Class:
Acute: Yes
Chronic: Yes
Fire: Yes
Pressure: No
Reactive: No
Section 313 Toxic Chemicals:
None
Supplemental State Compliance Information:
California
Warning: This product contains the following chemical(s) listed by the State of California under the
Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) as being known to cause
cancer, birth defects or other reproductive harm.
None known.
Revision: 01/05
Adsil - MSDS Coordinator
Palm Coast, FL 32127
PH: 386/445/8239
AD309 Part 2 page 4
MATERIAL SAFETY DATA SHEET
SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Material Identification: MicroGuard AD309 Hardener & Curing Solution (Part 2)
Adsil 386-445-8239 Phone
P.O. Box 353880 386-445-0471 FAX
Palm Coast, FL 32135-3880 CHEMTREC: 1-800-424-9300
SECTION 2: OSHA HAZARDOUS COMPONENTS
CAS Number Wt% Components Exposure Limits
64-19-7 2 鈥? 5% Acetic Acid TWA 10 ppm, STEL n/e
Ceiling n/e
7732-18-5 95 - 98% Distilled Water Not Applicable
Comments: n/e = not established
NFPA/HMIS Code: Health 0, Flammability 0, Reactivity 0
SECTION 3: PHYSICAL DATA FOR MATERIAL
pH: 4.0 (+/- 0.5)
Solubility in water: Complete
Appearance: Clear Liquid
Odor: Slight
Specific Gravity @ 25C: 0.99
VOC Content: N/A
SECTION 4: FIRE AND EXPLOSION HAZARD OF MATERIAL
FLASH POINT: Not Applicable
EXTINGUISHING MEDIA: Not Flammable.
FIRE FIGHTING PROCEDURES: Not Flammable.
UNUSUAL FIRE HAZARDS: None.
SECTION 5: HEALTH AND HAZARD DATA
EYE CONTACT: Causes moderate eye irritation.
SKIN CONTACT: Causes mild skin irritation.
INHALATION: Spray mist may be irritating to respiratory tract.
INGESTION: May cause gastrointestinal irritation, nausea, vomiting or diarrhea.
SIGNS AND SYMPTOMS OF EXPOSURE: Slight irritation to the nose and throat (inhalation),
redness, and tearing (eye exposure), itching (skin exposure).
SPECIAL HAZARDS: Carcinogens - none known
Teratogens - none known
Mutagens - none known
Reproductive toxins - none known
Sensitizers 鈥? none known
AD309 Part 2 page 5
SECTION 6: FIRST AID MEASURES
Eye: Flush with water.
Skin: Flush with water. Remove contaminated clothing.
Inhalation: Remove to fresh air.
Oral: If large quantity swallowed, get medical attention. Only induce vomiting if directed by
physician.
SECTION 7: REACTIVITY DATA
Stability: Stable.
Hazardous Polymerization: Hazardous polymerization will not occur
Conditions to Avoid: None known.
Materials to Avoid: None.
SECTION 8: LEAK OR SPILL INFORMATION
Containment/Clean-up: Ventilate area. Absorb with inert material and place in chemical waste container.
SECTION 9: SPECIAL PROTECTION INFORMATION
Respiratory Protection: Use respiratory protection if product is sprayed.
Gloves: Washing at mealtime and end of shift. Wear latex gloves during handling.
Eye Protection: Safety glasses at a minimum.
Protective Equipment: Safety eyewash station (bottle) should be within direct access.
Personal Hygiene: Avoid contact with eyes, on skin or on clothing. Wash after handling. Wash
contaminated clothing before reuse.
SECTION 10: TRANSPORT INFORMATION
US DOT Information (49CFR 172.101)
Not Regulated
Supplemental State Compliance Information:
California
Warning: This product contains the following chemical(s) listed by the State of California under the
Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) as being known to cause
cancer, birth defects or other reproductive harm.
None known.
Revision: 01/05
Adsil - MSDS Coordinator
Palm Coast, FL 32137
PH: 386-445-8239
|