AD708 page1
MATERIAL SAFETY DATA SHEET
SECTION 1: CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Material Identification: MicroGuard AD708 Hard Tile Clear Gloss Treatment (Part A)
Adsil 386-445-8239 PHONE
P.O. Box 353880 386-445-0471 FAX
Palm Coast, FL 32135-3880 CHEMTREC: 1-800-424-9300
SECTION 2: OSHA HAZARDOUS COMPONENTS
C.A.S. Number(s) Wt% Components Exposure Limits
Proprietary 鈥? Mixture 98% Alkoxysilanes No exposure limits established
67-56-1 2% Methyl Alcohol OSHA PEL (final rule) and ACGIH
TLV-skin: TWA 200 ppm,
STEL 250 ppm
The above components are hazardous as defined in 29 CFR 1910.1200.
NFPA/HMIS Code: Health 1, Flammability 3, Reactivity 0
SECTION 3: PHYSICAL DATA FOR MATERIAL
pH: Not Applicable (non-aqueous)
Solubility in water: None
Appearance: Clear Colorless Liquid
Odor: Strong Odor
Specific Gravity @ 250 C: 0.95
Boiling Point: >35.00 C., >95.00 F.
VOC Content: 656 g./liter (Components A, B, C mixed); Method 24.
SECTION 4: FIRE & EXPLOSION HAZARD OF MATERIAL
Flash Point: 46.90 F./8.30 C.
Fire Hazards: Static electricity may accumulate and ignite vapors. Prevent a possible fire hazard by
suitable means, such as bonding or grounding, inert gas purge, vapor dilution and the like. Vapors are
heavier than air and can travel along the ground to remote ignition sources.
Unusual Fire Hazards: Thermal breakdown of this product during fire or very high heat conditions may
evolve the following hazardous decomposition products; Silicon Dioxide, Carbon Dioxide and traces of
incompletely burned carbon compounds, Formaldehyde.
Extinguishing Media: Carbon Dioxide (CO2), Water Fog, Dry Chemical.
Fire Fighting Procedures: Self-contained breathing apparatus and protective clothing should be worn
when fighting fires involving chemicals. Heat exposure pressurizes closed containers. Evacuate the area in
cases of overheating or fire.
SECTION 5: HEALTH & HAZARD DATA
Eye Contact: Causes eye irritation.
Skin Contact: Causes skin irritation.
Inhalation: Spray mist may cause damage to respiratory tract.
Ingestion: Product generates methyl alcohol, which may cause blindness and possibly death, if swallowed.
Signs & Symptoms of Exposure: Burning pain in the nose and throat (inhalation), pain, redness and
tearing (eye exposure), itching or burning (skin exposure).
AD708 page2
Special Hazards: Carcinogens 鈥? none known
Teratogens 鈥? none known
Mutagens 鈥? none known
Reproductive Toxins 鈥? none known
Sensitizers 鈥? When heated to temperatures above 1500 C., in the presence of air, product
can form formaldehyde vapors. Formaldehyde is a potential cancer hazard, a known skin and respiratory
sensitizer and an irritant to the eyes, nose, throat, skin and digestive system.
Warning: Product will give off additional methyl alcohol when exposed to moisture or humidity.
Comments: Methyl Alcohol forms on contact with water or humid air. Provide adequate ventilation to
control exposure within guidelines of OSHA PEL:
TWA 200 ppm and ACGIH TLV-skin: TWA 200 ppm, STEL 250 ppm.
SECTION 6: FIRST AID MEASURES
Eyes: Immediately flush with clean water for 15 minutes. Get medical attention.
Skin: No first aid should be needed.
Inhalation: Remove to fresh air. Get medical attention if ill effects persist.
Oral: Get immediate medical attention. If conscious, give lukewarm water (pint or 陆 liter) to dilute
ingested material. Do not induce vomiting. Lie down, keep warm and cover eyes to exclude light.
Comments: Treat the same as methyl alcohol poisoning.
SECTION 7: REACTIVITY DATA
Stability: Stable.
Hazardous Polymerization: Will not occur.
Conditions to Avoid: None known.
Materials to Avoid: Concentrated nitric and sulfuric acids, strong oxidizers, aldehydes, halogens and
halogen compounds.
SECTION 8: LEAK OR SPILL INFORMATION
Containment/Clean-up: Disposal of collected product, residues and clean up materials may be
governmentally regulated. Observe all applicable local, state and federal waste management regulations.
Remove possible ignition sources and if needed, use non-sparking tools and equipment. To prevent
possible spontaneous combustion, store rags, mops, absorbent, etc; used during clean up in appropriate
containers or covered with water. Mop, wipe or soak up with absorbent material and contain for salvage or
disposal. For large spills, provide diking or other appropriate containment to keep material from spreading.
Clean any remaining slippery surfaces by appropriate techniques, such as washing with mild, caustic
detergents or solutions, or high-pressure steam for large areas. Observe any safety precautions applicable to
the cleaning material used.
SECTION 9: SPECIAL PROTECTION INFORMATION
Respiratory Protection: Use approved NIOSH respiratory protection (black cartridge, minimum), unless
adequate local exhaust ventilation if provided or air-sampling data show exposures are within
recommended exposure guidelines. Industrial hygiene personnel can assist in judging the adequacy of
existing engineering controls.
Gloves: Washing at mealtime or end of shift. No special protection is needed.
Eye Protection: Safety glasses at a minimum.
Protective Equipment: Eyewash station (or bottle) should be within direct access of work area.
Personal Hygiene: Do not get in eyes or on clothing. Avoid contact with skin. Wash thoroughly after
handling. Wash contaminated clothing before reuse.
AD708 page3
SECTION 10: TRANSPORT INFORMATION
DOT Information (49 CFR 172.101)
Proper Shipping Name: FLAMMABLE LIQUID, n.o.s.
Hazard Technical Name: METHOXYSILANE/METHANOL
Hazard Class: 3
UN Number: UN1993
Packing Group: II
SECTION 11: HANDLING & STORAGE
Handling: No special precautions.
Storage: Keep container closed and stored away from heat, sparks and open flame. Store away from water
or moisture.
SECTION 12: REGULATORY INFORMATION
TSCA Status: All chemical substances in this material are included on or exempted from listing on the
TSCA Inventory of Chemical Substances.
EPA SARA Title III Chemical Listings:
Section 302 CERCLA Extremely Hazardous Substances: None
Section 304 CERCLA Hazardous Substances: None
Section 312 Hazard Class:
Acute: Yes
Chronic: Yes
Fire: Yes
Pressure: No
Reactive: No
Section 313 Toxic Chemicals:
CAS Number Wt% Component Name
67-56-1 2.0 Methyl Alcohol
Supplemental State Compliance Information: California
Warning: This product contains the following chemical(s) listed by the State of California under the
Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) as being known to cause
cancer, birth defects or other reproductive harm.
None known.
Revision Date: 01/05
Prepared by: Adsil - MSDS Coordinator
Palm Coast, Florida 32137
PH: 386-445-8239
AD708 page4
MATERIAL SAFETY DATA SHEET
SECTION 1: CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Material Identification: MicroGuard AD708 Hard Tile Clear Gloss Treatment (Part B)
Adsil 386-445-8239 PHONE
P.O. Box 353880 386-445-0471 FAX
Palm Coast, FL 32135-3880 CHEMTREC: 1-800-424-9300
SECTION 2: OSHA HAZARDOUS COMPONENTS
C.A.S. Number(s) Wt% Components Exposure Limits
7732-18-5 95 - 98% Distilled Water Not Applicable
64-19-7 2 - 5% Acetic Acid TWA 10 ppm, STEL n/e
NFPA/HMIS Code: Health 0, Flammability 0, Reactivity 0
SECTION 3: PHYSICAL DATA FOR MATERIAL
pH: 4.0 (+/- 0.5)
Solubility in water: N/A
Appearance: Clear Liquid (colorless)
Odor: Slight Vinegar
Specific Gravity@ 250 C: 1.00
Boiling Point: 1000 C., 2120 F.
VOC Content: None
SECTION 4: FIRE & EXPLOSION HAZARD OF MATERIAL
Flash Point: N/A
Fire Hazards: None
Unusual Fire Hazards: None
Extinguishing Media: Not Flammable
Fire Fighting Procedures: N/A
SECTION 5: HEALTH & HAZARD DATA
Eye Contact: May cause moderate eye irritation.
Skin Contact: May cause mild skin irritation.
Inhalation: None
Ingestion: None
Signs & Symptoms of Exposure: None
Special Hazards: Carcinogens 鈥? none known
Teratogens 鈥? none known
Mutagens 鈥? none known
Reproductive Toxins 鈥? none known
SECTION 6: FIRST AID MEASURES
Eyes: None
Skin: None
Inhalation: None
Oral: None
Comments: Acetic Acid in concentrations of <5% should not require any first aid measures.
AD708 page5
SECTION 7: REACTIVITY DATA
Stability: Stable.
Hazardous Polymerization: Will not occur.
Conditions to Avoid: None known.
Materials to Avoid: None.
SECTION 8: LEAK OR SPILL INFORMATION
Containment/Clean-up: Not Applicable
SECTION 9: SPECIAL PROTECTION INFORMATION
No special precautions necessary.
SECTION 10: TRANSPORT INFORMATION
DOT Information (49 CFR 172.101)
Not a regulated material.
SECTION 11: HANDLING & STORAGE
Handling: No special handling requirements.
Storage: Protect from freezing.
SECTION 12: REGULATORY INFORMATION
EPA SARA Title III Chemical Listings:
Section 302 CERCLA Extremely Hazardous Substances: Not Applicable
Section 304 CERCLA Hazardous Substances: Not Applicable
Section 312 Hazard Class:
Acute: No
Chronic: No
Fire: No
Pressure: No
Reactive: No
Section 313 Toxic Chemicals: Not Applicable
Supplemental State Compliance Information: California
Warning: This product contains the following chemical(s) listed by the State of California under the
Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) as being known to cause
cancer, birth defects or other reproductive harm.
None known.
Revision Date: 01/05
Prepared by: Adsil - MSDS Coordinator
Palm Coast, Florida 32137
PH: 386-445-8239
AD708 page6
MATERIAL SAFETY DATA SHEET
SECTION 1: CHEMICAL PRODUCT & COMPANY IDENTIFICATION
Material Identification: MicroGuard AD708 Hard Tile Clear Gloss Treatment (Part C)
Adsil 386-445-8239 PHONE
P.O. Box 353880 386-445-0471 FAX
Palm Coast, FL 32135-3880 CHEMTREC: 1-800-424-9300
SECTION 2: OSHA HAZARDOUS COMPONENTS
C.A.S. Number(s) Wt% Components Exposure Limits
67-63-0 38-42% Isopropyl Alcohol TWA 400 ppm, STEL 500 ppm
52125-53-8 28-30% Glycol Ether PE Not Established
1569-01-3 28-30% Glycol Ether PNP Not Established
NFPA/HMIS Code: Health 1, Flammability 3, Reactivity 0
SECTION 3: PHYSICAL DATA FOR MATERIAL
pH: No Applicable (non-aqueous)
Solubility in water: Complete
Appearance: Clear Liquid
Odor: Strong Odor (alcohol)
Specific Gravity @ 250 C: 0.79
Boiling Point: 88.00 C., 190.00 F.
VOC Content: 656 g./liter (Components A, B, C mixed); Method 24.
SECTION 4: FIRE & EXPLOSION HAZARD OF MATERIAL
Flash Point: 58.00 F./12.80 C.
Fire Hazards: Static electricity may accumulate and ignite vapors. Prevent a possible fire hazard by
suitable means, such as bonding and grounding, inert gas purge, vapor dilution and the like. Vapors are
heavier than air and can travel along the ground to remote ignition sources.
Unusual Fire Hazards: Thermal breakdown of this product during fire or very high heat conditions may
evolve the following hazardous decomposition products; Silicon Dioxide, Carbon Dioxide and traces of
incompletely burned carbon compounds, Nitrogen Oxides, Formaldehyde.
Extinguishing Media: Carbon Dioxide (CO2), Water Fog, Dry Chemical
Fire Fighting Procedures: Self contained breathing apparatus and protective clothing should be worn
when fighting fires involving chemicals. Heat exposure pressurizes closed containers. Evacuate the area in
cases of overheating or fire.
SECTION 5: HEALTH & HAZARD DATA
Eye Contact: Causes eye irritation.
Skin Contact: Causes skin irritation.
Inhalation: Spray mist causes damage to respiratory tract.
Ingestion: Product generates methyl alcohol, which may cause blindness and possible death, if swallowed.
Signs & Symptoms of Exposure: Burning pain in the nose and throat (inhalation), pain, redness and
tearing (eye exposure), itching or burning (skin exposure).
AD708 page7
Special Hazards: Carcinogens 鈥? none known
Teratogens 鈥? none known
Mutagens 鈥? none known
Reproductive Toxins 鈥? none known
Sensitizers 鈥? When heated to temperatures above 1500 C., in the presence of air, product
can form formaldehyde vapors. Formaldehyde is a potential cancer hazard, a known skin and respiratory
sensitizer and an irritant to the eyes, nose, throat, skin and digestive system.
SECTION 6: FIRST AID MEASURES
Eyes: Immediately flush with water for 15 minutes. Get medical attention.
Skin: No first aid should be needed.
Inhalation: Remove to fresh air. Get medical attention, if ill effects persist.
Oral: Get medical attention immediately. If conscious, give lukewarm water (pint to 陆 liter) to dilute
ingested material. Do not induce vomiting. Lie down, keep warm and exclude light from eyes.
Comments: Treat same as methyl alcohol poisoning.
SECTION 7: REACTIVITY DATA
Stability: Stable.
Hazardous Polymerization: Will not occur.
Conditions to Avoid: None known.
Materials to Avoid: Strong-oxidizing materials can cause a reaction. Water, moisture or humid air can
cause hazardous vapors to form, as described in Section 5.
SECTION 8: LEAK OR SPILL INFORMATION
Containment/Clean-up: Disposal of collected product, residues and clean up materials may be
governmentally regulated. Observe all applicable local, state and federal waste management regulations.
Remove possible ignition sources and if needed, use non-sparking tools and equipment. To prevent
possible spontaneous combustion, store rags, mops, absorbent, etc; used during clean up, only in
appropriate containers or covered with water. Mop, wipe or soak up with absorbent material and contain for
salvage or disposal. For large spills, provide diking or other appropriate containment to keep material from
spreading. Clean any remaining slippery surfaces by techniques, such as washing with mild, caustic
detergents or solutions or high-pressure steam for larger areas. Observe any safety precautions applicable to
the cleaning material used. Use self contained breathing apparatus and suitable protective wear, such as full
face respirator.
SECTION 9: SPECIAL PROTECTION INFORMATION
Respiratory Protection: Use respiratory protection (NIOSH-black cartridge, minimum). Provide for
adequate local exhaust ventilation, per recommended exposure guidelines.
Gloves: Washing hands at mealtime or end of shift. No special protection is needed.
Eye Protection: Safety glasses at a minimum.
Protective Equipment: Eyewash station (bottle) should be in direct access of work area.
Personal Hygiene: Do not get in eyes or on clothing. Avoid contact with skin. Wash thoroughly after
handling. Wash contaminated clothing before reuse.
AD708 page8
SECTION 10: TRANSPORT INFORMATION
DOT Information (49 CFR 172.101)
Proper Shipping Name: FLAMMABLE LIQUID, n.o.s.
Hazard Technical Name: CONTAINS ISOPROPANOL
Hazard Class: 3
UN Number: UN1993
Packing Group: II
SECTION 11: HANDLING & STORAGE
Handling: No special precautions.
Storage: Keep the container closed and away from heat, sparks and open flames. Store away from water or
moisture.
SECTION 12: REGULATORY INFORMATION
TSCA Status: All chemical substances in this material are included on or exempted from listing on the
TSCA Inventory of Chemical Substances.
EPA SARA Title III Chemical Listings:
Section 302 CERCLA Extremely Hazardous Substances: None
Section 304 CERCLA Hazardous Substances: None
Section 312 Hazard Class:
Acute: Yes
Chronic: Yes
Fire: Yes
Pressure: No
Reactive: No
Section 313 Toxic Chemicals: None
Supplemental State Compliance Information:
California
Warning: This product contains the following chemical(s) listed by the State of California under the
Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) as being known to cause
cancer, birth defects or other reproductive harm.
None known.
Revision Date: 01/05
Prepared by: Adsil - MSDS Coordinator
Palm Coast, Florida 32137
PH: 386-445-8239
|