Aremco Products, Inc. Information Phone: 845 268-0039
707-B Executive Blvd Emergency Phone: 845 268-0039
Valley Cottage, NY 10989
SECTION I - PRODUCT IDENTIFICATION
IDENTITY: AREMCO-BOND 2200-A Activator 11/21/2001
SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous Compounds CAS # ACGIH TLV OSHA PEL
Cycloaliphatic amine 2855-13-2 N/E N/D
Benzyl alcohol 100-51-6 N/E N/D
Glass fibers 65997-17-3 N/E N/D
Fumed Silica 7631-86-9 20mppcf N/D
HEALTH: 3 FLAMMABILITY: 1 REACTIVITY: 0
SECTION III - PHYSICAL DATA
Boiling Point: N/D
Specific Gravity: 1.5
Vapor Density (air=1): >1
Melting Point: N/A
Vapor Pressure (mm Hg.): <1
Evaporation Rate: No Data (Butyl Acetate=1)
Solubility in Water: Slightly
V.O.C. = N/D
Appearance and Odor: Amber liquid, ammonical odor
SECTION IV - FIRE and EXPLOSION HAZARD DATA
Flash Point: > 200F
Flammable Limits: N/D LEL: (N/D) UEL:(N/D)
Extinguishing Media:
Carbon dioxide, foam, dry chemical.
Special Fire Fighting Procedures:
Use self contained air supplied breathing apparatus. Class B liquid.
Unusual Fire and Explosion Hazards:
None known. Handle as a combustible.
SECTION V - REACTIVITY DATA
Stability ( ) Unstable ( X ) Stable
Conditions to avoid:
Incompatible with strong oxidizing agents.
Hazardous decomposition or by-products:
carbon dioxide and or carbon monoxide, nitrogen oxides.
Hazardous Polymerization ( ) May Occur ( X ) Will Not Occur
SECTION VI - HEALTH HAZARD DATA
Effects of Overexposure:
Primary routes of entry:
Inhalation, skin, ingestion.
Overexposure effects:
Irritation, sensitization, dermatitis; allergies may be aggravated by exposure.
Emergency and First-Aid Procedures:
Eye:
Immediately flush with water for at least 15 minutes. Promptly see an eye physician if
irritation occurs.
Skin:
Wipe off excess. Rinse skin with soap and water. For persistent irritation, see a
physician.
Ingestion:
If swallowed and conscious, give water or milk to dilute. Do NOT induce vomiting. If
vomiting occurs, keep head below hips. Give fluid again. Have medical personnel
determine if stomach evacuation or vomiting is necessary.
Inhalation:
Remove to fresh air, give oxygen if breathing is difficult. If not breathing, give
artificial respiration.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to be taken in case material is released or spilled:
Avoid personal contact. Recover uncontaminated material for use. Scrub with 5%
acetic acid. Rinse with very hot water. Flush contaminated area with water.
Waste Disposal Method:
Dispose of in accordance with local, state, and Federal regulations.
Precautions to be taken in handling and storing:
Do NOT leave containers open, causes irritation. Shipping Name: Plastic Material,
Liquid, Lumps or Solid mass No I. DOT: Not Restricted. IATA: Not Restricted.
SECTION VIII SPECIAL PROTECTION INFORMATION
Respiratory Protection:
NIOSH approved respirator for organic vapors above the TLV level.
Ventilation:
Local exhaust, not usually needed. Mechanical (general) Acceptable.
Special:
Barrier cream recommended.
Other:
Not usually needed.
CHEMICAL COMPONENTS OF THIS PRODUCT WHICH ARE PRESENT IN REPORTABLE AMOUNTS AND ARE
LISTED IN SECTION 313 OF THE EMERGENCY PLANNING AND COMMUNITY RIGH TO KNOW ACT OF 1986
(SARA TITLE III) ARE SHOWN BELOW WITH THEIR CAS REGISTRY NUMBERS AND MAXIMUM COMPOSITION
BY WEIGHT.
LISTED CHEMICAL CAS NUMBER MAX WT %
NONE
DISCLAIMER OF LIABILITY: THE INFORMATION CONTAINED HERE IN IS BASED ON DATA
TAKEN FROM SOURCES BELIEVED TO BE BOTH CURRENT AND RELIABLE AT THE TIME OF
PUBLICATION. AREMCO PRODUCTS, INC MAKES NO WARRANTIES EXPRESSED OR IMPLIED,
AS TO THE ACCURACY AND ASSUMES NO LIABILITY ARISING FROM ITS USE BY OTHERS.
COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS
REMAINS THE RESPONSIBILITY OF THE USERS.
Aremco Products, Inc. Information Phone: 845 268-0039
707-B Executive Blvd Emergency Phone: 845 268-0039
Valley Cottage, NY 10989
SECTION I - PRODUCT IDENTIFICATION
IDENTITY: AREMCO-BOND 2200-B Base 11/21/01
SECTION II - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous Compounds CAS # ACGIH TLV OSHA PEL
Bisphenol-A Epoxy resin 25068-38-6 N/E N/E
Epoxy phenolic novalac resin 28064-14-4 N/E N/E
Tetrabromo Bisphenol-A 79-94-7 10mg/m3 15mg/m3
Aluminum Hydroxide 21645-51-2 10mg/m3 15mg/m3
Glass 65997-17-3 10mg/m3 15mg/m3
Silica 7631-86-9 20mppcf 15mg/m3
HEALTH: 2 FLAMMABILITY: 1 REACTIVITY: 0
All compounds are suspended in resin therefore no free dust is present.
SECTION III - PHYSICAL DATA
Boiling Point: N/D
Specific Gravity: 1.6
Vapor Density (air=1): >1
Melting Point: N/A
Vapor Pressure (mm Hg.): <1
Evaporation Rate: No Data (Butyl Acetate=1)
Solubility in Water: 0
V.O.C. = N/D
Appearance and Odor: Orange paste, slight odor.
SECTION IV - FIRE and EXPLOSION HAZARD DATA
Flash Point: >300F
Flammable Limits: N/D LEL: (N/D) UEL:(N/D)
Extinguishing Media:
Carbon dioxide, foam, dry chemical.
Special Fire Fighting Procedures:
Use self contained air supplied breathing apparatus. Class B liquid.
Unusual Fire and Explosion Hazards:
None known. Handle as a combustible.
SECTION V - REACTIVITY DATA
Stability ( ) Unstable ( X ) Stable
Conditions to avoid:
Incompatible with strong oxidizing agents.
Hazardous decomposition or by-products:
carbon dioxide and or carbon monoxide, nitrogen oxides.
Hazardous Polymerization ( ) May Occur ( X ) Will Not Occur
SECTION VI - HEALTH HAZARD DATA
Effects of Overexposure:
Primary routes of entry:
Inhalation, skin, ingestion.
Health hazards (acute and chronic):
ANSI classification 3
Overexposure effects:
Irritation, sensitization, dermatitis; allergies may be aggravated by exposure.
Emergency and First-Aid Procedures:
Eye:
Immediately flush with water for at least 15 minutes. Promptly see an eye physician if
irritation occurs.
Skin:
Wipe off excess. Rinse skin with soap and water. For persistent irritation, see a
physician.
Ingestion:
If swallowed and conscious, give water or milk to dilute. Do NOT induce vomiting. If
vomiting occurs, keep head below hips. Give fluid again. Have medical personnel
determine if stomach evacuation or vomiting is necessary.
Inhalation:
Remove to fresh air, give oxygen if breathing is difficult.
If not breathing, give artificial respiration.
SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to be taken in case material is released or spilled:
Avoid personal contact. Recover uncontaminated material for use. Scrub with 5%
acetic acid. Rinse with very hot water. Flush contaminated area with water.
Waste Disposal Method:
Dispose of in accordance with local, state, and Federal regulations.
Precautions to be taken in handling and storing:
Do NOT leave containers open, causes irritation. Shipping Name: Plastic Material,
Liquid, Lumps or Solid mass No I. DOT: Not Restricted. IATA: Not Restricted.
SECTION VIII SPECIAL PROTECTION INFORMATION
Respiratory Protection:
NIOSH approved respirator for organic vapors above the TLV level.
Ventilation:
Local exhaust, not usually needed. Mechanical (general) Acceptable.
Special:
Barrier cream recommended.
5
Other:
Not usually needed.
CHEMICAL COMPONENTS OF THIS PRODUCT WHICH ARE PRESENT IN REPORTABLE AMOUNTS AND ARE
LISTED IN SECTION 313 OF THE EMERGENCY PLANNING AND COMMUNITY RIGH TO KNOW ACT OF 1986
(SARA TITLE III) ARE SHOWN BELOW WITH THEIR CAS REGISTRY NUMBERS AND MAXIMUM COMPOSITION
BY WEIGHT.
LISTED CHEMICAL CAS NUMBER MAX WT %
NONE
DISCLAIMER OF LIABILITY: THE INFORMATION CONTAINED HERE IN IS BASED ON DATA
TAKEN FROM SOURCES BELIEVED TO BE BOTH CURRENT AND RELIABLE AT THE TIME OF
PUBLICATION. AREMCO PRODUCTS, INC MAKES NO WARRANTIES EXPRESSED OR IMPLIED,
AS TO THE ACCURACY AND ASSUMES NO LIABILITY ARISING FROM ITS USE BY OTHERS.
COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS AND REGULATIONS
REMAINS THE RESPONSIBILITY OF THE USERS.
6
|