Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

8001-78-3
9003-13-8
8050-15-5
8012-89-3
7782-40-3

File Name: imscompany_com---120778-782-784-787-792-793-796-797-798-800.asp
                             SYNTHETIC VIRGIN DIAMOND COMPOUNDS
IMS Company Page 1 of 4
Validation Date: August 2, 2004 Material Safety Data Sheet V-3.2.01

Section 1 - Manufacturer Information

Manufacturer/Distributor IMS Company Emergency Phone # 800-424-9300
10373 Stafford Road Prepared by Safety Advisor
Chagrin Falls, OH 44023-5296 Prepared/Revised July 30, 2004
WEB imscompany.com Email sales@imscompany.com

Trade Name Synthetic Virgin Diamond Compounds

Part Numbers 120778, 120781, 120782, 120784, 120787, 120790, 120792, 120793, 120796,
120797, 120798, 120800, 120804, 120806, 120807, 120809

Hazardous Material Information System

Health ................1 Flammability ...........0 Reactivity.................0 Protection................X
* Chronic (Accumulates)
0 Normal use Material 0 Will Not Burn 0 Stable X = Consult the
1 Slight Hazard (temporary) 1 Possible to Burn 1 Unstable if Heated MSDS and
2 Health Affected (lengthy) 2 Burns if Heated 2 Violent Chemical Change your supervisor
3 Extreme Danger 3 Easily Burns 3 Shock and Heat Sensitive for your special
4 Severe or Fatal 4 Very Easily Burns 4 May Explode workplace need

NOTE The HMIS may be not enough hazard information for this chemical in all workplaces. The HMIS system requires
employee training about the system and about information in this MSDS.

Section 2 - Hazardous Ingredients
Chemical/Common Name CAS-Number % PEL-OSHA TLV-ACGIH
(1) (2) (2)
Castor Glycerides 8001-78-3
(1) (2) (2)
Polyalkylene Glycol 9003-13-8
(1) (2) (2)
Methyl Ester of Rosin 8050-15-5
(1) (2) (2)
Vegetable Oil None
(1) (2) (2)
Esters 8012-89-3
(1)
10 mg/m3 (3) 10 mg/m3(3)
Diamond (as a dust) 7782-40-3
(1)
The percentages of these components have been withheld by the formulator as trade secret.
(2)
None Established
(3)
Nuisance dust level

Does this product contain carcinogens (NTP, IARC, or OSHA)? No

Section 3 - Health Hazard Data
HEALTH EFFECTS - (Acute and Chronic 鈥? None established) As with a ny petroleum-based product, skin
irritation or skin dermatitis can occur if prolonged or repeated skin contact occurs. Keep out of open
wounds. Avoid breathing large quantities of the thermal decomposition fumes.

Inhalation Not volatile at ambient temperatures. Dizziness, if exposed to decomposition vapors.

Ingestion Copper can exhibit slightly toxic effects if ingested. May cause gastrointestinal discomfort.
SYNTHETIC VIRGIN DIAMOND COMPOUNDS
IMS Company Page 2 of 4
Validation Date: August 2, 2004 Material Safety Data Sheet V-3.2.01

Section 3 - Health Hazard Data (continued)
Eyes Prevent eye contact. Irritation if gotten into eyes.

Skin Prevent skin contact. Irritation can occur from prolonged or repeated skin contact. Keep out
of open wounds.

PRIMARY ROUTES OF ENTRY Skin contact, ingestion.

MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE None known

EMERGENCY FIRST AID PROCEDURES

Eye Contact Flush eyes immediately with water for at least 15 minutes. May cause temporary eye
irritation.

Skin Contact Wash affected area with soap and water; use a fingernail brush as needed. Wash
contaminated clothing before re-use. Seek medical attention if irritation persists.

Inhalation Remove to fresh air. Not likely under normal conditions of use. If using in high temperature
applications where thermal decomposition is likely, use local exhaust to keep down fumes.
If dizziness occurs, seek fresh air.

Ingestion Induce vomiting; Seek medical attention immediately.

Section 4 - Chemical Data
Boiling Point .....................................NA Specific Gravity (Water = 1) ................>1
Vapor Pressure (mmHg)) ..............NA Percent Volatile by Volume (%)..........NA
Evaporation Rate (Ether = 1) ........NA Solubility in Water .................................NIL
Melting Point....................................NA Reactivity in Water ................................None

Appearance and Odor Information Paste, mild odor; variety of colors.

Section 5 - Physical Hazard Data
Flash Point (COC).........................................>305掳 F Flammable Limits LEL = NA UEL = NA

Extinguishing Media Foam, carbon dioxide, and dry chemical.

Special Fire Fighting Procedures This compound will not burn unless it is pre-heated. Water may be
used to cool the containers. However, frothing may occur if water is sprayed directly into a burning
container.

Unusual Fire and Explosion Hazards Spilled contents may cause slippery floors. Noxious or toxic
fumes may be formed in a fire. Wear self-contained breathing apparatus.

Incompatibility (Materials to Avoid) Strong oxidizers

Hazardous Decomposition Products CO and CO2
SYNTHETIC VIRGIN DIAMOND COMPOUNDS
IMS Company Page 3 of 4
Validation Date: August 2, 2004 Material Safety Data Sheet V-3.2.01

Section 5 - Physical Hazard Data (continued)
Will Hazardous Polymerization Occur? No

Conditions to Avoid for Polymerization NA

Is the Product Stable? Yes

Conditions to Avoid for Stability High heat, incompatibles.

Section 6 - Spill or Leak Procedures
Steps to be Taken in Case Material is Released or Spilled Because of the viscous nature of this
product, spills are unlikely. Clean up using inert materials; Prevent material from spreading; Dispose of
immediately; Wear appropriate protective equipment. Scoop it back into the container.

Waste Disposal Methods Consult Federal, State, or Local disposal authorities for approved procedures.
Contains a petroleum oil, the preferred method of disposal is incineration. Do not discharge into sewers or
waterways.

Section 7 - Exposure Control Information
Ventilation General ventilation, local exhaust, or mechanical or special ventilation to minimize exposure to
product vapors.

Respiratory Protection Generally not required if adequate ventilation is provided. If this product is being
used in high temperature applications where the product 鈥渟mokes,鈥? use a local exhaust, or ventilate the
area to maintain the air quality or use a NIOSH approved organic vapor respirator.

Protective Gloves Protect persons with open wounds or with skin sensitivity or if prolonged or repeated
skin contact is expected, wear solvent-resistant gloves such as Viton, Polyvinyl Alcohol, or equivalent
rubber gloves.

Other Protective Equipment As required by your company. If contact with the product is likely, eye
protection is recommended. Goggles or safety glasses with side shields and face shield will provide
protection in most situations.

Other Engineering Controls To determine exposure levels, monitoring should be performed. Eyewash
station should be available

Work Practices Do not use in confined or closed space. Ventilation should maintain the concentration of
the product and its components below their exposure limits.

Hygienic Practices Avoid contacts with skin and avoid breathing vapors. Do not eat, drink, or smoke in
work area. Wash hands thoroughly after handling and before eating, drinking, or using restroom after
using this or any chemical product.
SYNTHETIC VIRGIN DIAMOND COMPOUNDS
IMS Company Page 4 of 4
Validation Date: August 2, 2004 Material Safety Data Sheet V-3.2.01


Section 8 - Special Precautions
Precautions to be Taken in Handling and Storage Keep container closed. Store at room temperature,
plus or minus 10 degrees. Store away from high heat, open flames, and strong oxidizers. Keep away from
children.

Maintenance Precautions Do not remove or deface label.


CAUTION Intentional misuse of this chemical product, as with any industrial chemical, in contact
with the body can be harmful or fatal. This includes such things as deliberately breathing, placing
in mouth, swallowing, placing on skin, or any other body contact, or repeated or continuous
contact.

IMS provides this information in good faith, but makes no representation as to its comprehensiveness or its
accuracy. This document is offered as a guide to a trained person, for appropriate precautionary handling.
Persons using the product and receiving the information must exercise independent judgment in
determining the appropriateness of the use and the safety information for their particular purpose. IMS
MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE WITH RESPECT TO THIS INFORMATION OR TO THE PRODUCT. ACCORDINGLY, IMS
WILL NOT BE RESPONSIBLE FOR DAMAGES RESULTING FROM USE OF OR RELIANCE ON THIS
INFORMATION.

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
imaging_mallinckrodt_com---Ascorbic_Acid_Injection.asp 50-81-7 139-33-3 7732-18-5 144-55-8
imaging_mallinckrodt_com---optiray.asp 87771-40-2 63-33-9 77-86-1
imc-group_com---Nickel_Nitrate_Crystal.asp 13478-00-7
imc-group_com---Stannous_sulfate_Powder_Flake.asp 7488-55-3
imperialdental_net---MSDS_Paste_Opaque.asp 12001-21-7 56-81-5 107-88-0
imscompany_com---120778-782-784-787-792-793-796-797-798-800.asp 8001-78-3 9003-13-8 8050-15-5 8012-89-3 7782-40-3
incolimited_com---INMETCOSpentLithiumIonBatterySolids.asp 7440-02-0 1313-99-1 7440-50-8 1317-38-0 7440-48-4 1307-96-6 1344-28-1 7789-24-4 24937-79-9
inco_com---CCCR-CREDEWBoshPondSolids-CanadianMSDS.asp 3333-67-3 39430-27-8 1184-64-1 12069-69-1 7542-09-8 12602-23-2 10102-50-8 14808-60-7 471-34-1
indeco_jp---bbot.asp 02-05-0 7128-64-5
indeco_jp---c450.asp 01-05-0 26078-25-1
indeco_jp---c478.asp 01-05-0 41175-45-5
indeco_jp---c480.asp 01-05-0 41267-76-9
indeco_jp---c485.asp 01-05-0 53518-14-2
indeco_jp---c490.asp 01-05-0 53518-15-3
indeco_jp---c503.asp 01-05-0 55804-70-1
indeco_jp---c504.asp 01-05-0 55804-66-5
indeco_jp---c521.asp 01-05-0 55804-67-6
indeco_jp---c523.asp 55804-68-7
indeco_jp---c535.asp 01-05-0 27425-55-4
indeco_jp---c540.asp 01-05-0 38215-36-0
indeco_jp---c540a.asp 01-05-0 53518-18-6
indeco_jp---di.asp 03-28-0 977-96-8
indeco_jp---dotci.asp 01-15-0 15185-43-0
indeco_jp---dtdci.asp 01-20-0 514-73-8
indeco_jp---j_znse.asp 1315-09-9
indeco_jp---nci.asp 03-28-0 4846-34-8
indeco_jp---sr640.asp 01-13-0 60311-02-6
industrialbolt_com---81120_Hardner.asp 140-31-8 112-24-3 90-72-2 112945-52-5 111-41-1 13474-96-9 103-76-4 111-40-0
industrialbolt_com---PenetratingOil.asp 8008-20-6 8052-41-3 74-98-6 75-28-5 106-97-8 64742-52-5
inflowes-msds.asp 129813-58-7 9016-45-9 111-96-6
ingredients_co_nz---FCC88_MSDS.asp 79-33-4
INMO030.asp 13939-06-5
insco-inc_com---Liquid_Air_Freshener_-_Citrus.asp 56539-66-3 7732-18-5
inspiralis_com---msds_topo_IV.asp 56-81-5 7365-45-9 3483-12-3 6381-92-6 19473-49-5 16674-78-5 987-65-5 9048-46-8
instaoffice_com---hewc1809a.asp 6920-22-5 7732-18-5
insulationfabricators_com---Childers_-_CP-45_Encacel_V_Spray_Grade_-_MSDS.asp 08-04-2 64742-95-6 95-63-6 68476-25-5 63449-39-8
interchim_com---MSDS-UP873358PhenolChoroform.asp 108-95-2 67-66-3 123-51-3
internationalbatteryinc_com---MSDS_083005.asp N/A
internationalepoxies_com---670A.asp 7534-94-3 868-77-9 79-41-4 11295-52-5 614-45-9 110-16-7 81-07-2
intertechnology_com---Denex_2000.asp 67-64-1 28064-14-4 78-93-3 80-08-0 25085-99-8 75-23-0
intertechnology_com---TEC-1.asp 110-71-4 113492-05-0 107-25-5
invitrogen_com---466225_MTR-NAIV_MS.asp 530-59-6
invivogen_com---MSDS_Puromycin.asp 58-58-2
inweldcorporation_com---Aluminum_Wire.asp 60676-86-0 1309-37-1 7440-50-8 7439-96-5 1309-48-4 1314-13-2 13463-67-7 7429-90-5 744-47-3 7440-41-7
iosh_gov_tw---msds1055.asp 78-87-5
iosh_gov_tw---msds1071.asp 95-95-4
iosh_gov_tw---msds1107.asp 120-82-1
iosh_gov_tw---msds1147.asp 540-73-8
irisdiagnostics_com---800-8551_AUTION_Sticks10EA.asp 81-75-6 9001-37-0 9003-99-0 83-07-8 313222-89-8 4430-25-5
irvingoil_com---03630_BUNKER_C_MSDS.asp 68553-00-4 50-32-8 7704-34-9 7783-04-6 1314-62-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC