Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

129813-58-7
9016-45-9
111-96-6

File Name: inflowes-msds.asp
                                                                                               Revision Date: 10/12/2006
IN/US
SYSTEMS, INC. MATERIAL SAFETY DATA SHEET
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: In-Flow ES
CHEMICAL NAMES/ Blend of nonionic surfactants and scintillators in chiral phenylalkanes.
DESCRIPTION:

MANUFACTURER: IN/US Systems, Inc. TELEPHONE NUMBER:
5809 North 50th Street TEL 813 626-6848
Tampa, FL 33610-4809 FAX 813 620-3708
EMERGENCY NUMBER:
CHEMTREC (800) 424-9300
2. COMPOSITION / INFORMATION ON INGREDIENTS
Component % Comp CAS # EINECS # TLV (units)
Nalkylene 70 - 85 129813-58-7 none established

Linear alkyl phenyl ethoxylates 15 - 30 9016-45-9 none established

1-methoxy-2-(2-methoxyethoxy)ethane 1-3 111-96-6 none established

3. HAZARDS IDENTIFICATION
Nearly odorless, clear blue-violet fluorescent liquid.
APPEARANCE AND ODOR:

EMERGENCY OVERVIEW - IMMEDIATE HAZARD
Nalkylene
MAY BE IRRITATING TO THE SKIN, EYES, AND RESPIRATORY TRACT.
Linear alkyl phenyl ethoxylates
CAUSES EYE IRRITATION. MAY CAUSE RESPIRATORY TRACT IRRITATION.
EMERGENCY OVERVIEW - CHRONIC HAZARD WARNING
Nalkylene
NO CHRONIC HEALTH HAZARDS KNOWN
Linear alkyl phenyl ethoxylates
NO ADVERSE EFFECTS HAVE BEEN DOCUMENTED IN HUMANS AS A RESULT OF CHRONIC EXPOSURE.

POTENTIAL HEALTH EFFECTS
INHALATION
Nalkylene
Breathing of the mists, vapors or fumes may irritate the nose, throat and lungs.
Linear alkyl phenyl ethoxylates
Vapors or mist, expecially as generated from heating the material or as from exposure in poorly ventilated
areas or confined spaces, may be irritating and cause discomfort in nose and throat. Prolonged exposure
may cause difficulty breathing.
INGESTION
Nalkylene
May cause irritation of the mouth, throat, and gastrointestinal tract. Exposure may also cause central nervous
system symptoms.
Linear alkyl phenyl ethoxylates
May be harmful by ingestion.
SKIN
Nalkylene
May cause skin irritation.
Linear alkyl phenyl ethoxylates
Brief contact may cause slight irritation. Prolonged contact, as with clothing wetted with material, may cause
more severe irritation and discomfort.
EYES
Nalkylene
Exposure to vapors, fumes or mists may cause irritation. Direct contact may cause irritation.


Page 1 In-Flow ES
Linear alkyl phenyl ethoxylates
Causes irritation and possible injury to the cornea.

SIGNS AND SYMPTOMS 0F OVEREXPOSURE
INHALATION
Nalkylene
Sore throat, coughing, labored breathing, sneezing and burning sensation, depending on the concentration
and duration of exposure. May cause central nervous system depression or effects. Symptoms may include
headache, excitation, euphoria, dizziness, incoordination, drowsiness, light-headedness, blurred vision,
fatigue, tremors, convulsions, loss of consciousness, coma, respiratory arrest and death, depending on the
concentration and duration of exposure.
Linear alkyl phenyl ethoxylates
Discomfort in nose and throat, nasal discharge, coughing, difficulty breathing.
INGESTION
Nalkylene
Salivation, pain, nausea, vomiting and diarrhea. Exposure may also cause central nervous system symptoms
similar to those listed under "Inhalation."
Linear alkyl phenyl ethoxylates
Abdominal discomfort, nausea, and diarrhea.
SKIN
Nalkylene
Drying, reddening, itching, and cracking. Repeated or prolonged contact with large amounts of this material
may result in absorption through the skin to produce toxic effects.
Linear alkyl phenyl ethoxylates
Local redness and swelling.
EYES
Nalkylene
Redness, tearing, and blurred vision.
Linear alkyl phenyl ethoxylates
Excess blinking and tear production. Marked redness and swelling of the eye with injury to the cornea.
CARCINOGENICITY
Nalkylene
Not listed by NTP or IARC as a known or possible carcinogen.
Linear alkyl phenyl ethoxylates
Not listed by NTP or IARC as a known or possible carcinogen.
MUTAGENICITY
Nalkylene
No information available.
Linear alkyl phenyl ethoxylates
No information available.
REPRODUCTIVE TOXICITY
Nalkylene
No information available.
Linear alkyl phenyl ethoxylates
No information available.
TERATOGENIC EFFECTS
Nalkylene
No information available.
Linear alkyl phenyl ethoxylates
No information available.
ROUTES OF ENTRY
Nalkylene
Ingestion, inhalation, skin contact.
Linear alkyl phenyl ethoxylates
Ingestion, inhalation.
TARGET ORGAN STATEMENT
Nalkylene
No information available.
Linear alkyl phenyl ethoxylates
No information available.

4. FIRST AID MEASURES
INHALATION:
Page 2 In-Flow ES
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a
physician.

INGESTION:
Do not induce vomiting because of danger of aspiration in lungs. Get medical attention immediately. Adverse
effects of aspiration into the lungs may be delayed up to 48 hours.

SKIN:
Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing
and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.

EYES:
Immediately flush eyes with plenty of water for at least fifteen minutes, lifting lower and upper eyelids occasionally.
Get medical attention immediately.

5. FIRE FIGHTING MEASURES
FLASH POINT: >93 C FLAMMABLE LIMITS: ND

PMCC ND
FLASH POINT METHOD: AUTOIGNITION TEMPERATURE:

EXTINGUISHING MEDIA
Water spray, dry chemical, alcohol-resistant foam, or carbon dioxide.


PROTECTIVE EQUIPMENT
In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full
facepiece operated in the pressure demand or other positive pressure mode.
HAZARDOUS COMBUSTION PRODUCTS:
Fires involving this product may release carbon monoxide, carbon dioxide, reactive hydrocarbons and irritating vapors.


UNUSUAL FIRE AND EXPLOSION HAZARDS
Vapors may form explosive mixtures with air. Vapors can travel to a source of ignition and flash back.

NFPA CODES: Health: 1 Flammability: 1 Reactivity: 0

6. ACCIDENTAL RELEASE MEASURES
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED
Eliminate source of ignition. Ventilate area. Cover with absorbent material (dry sand or earth) to confine spill and
sweep or shovel into container. Close container tightly. Avoid breathing vapors.

WASTE DISPOSAL METHOD
Disposal must be made in accordance with applicable federal, state, and local regulations.



PERSONAL PRECAUTIONS
Wear appropriate protective equipment as specified in section 8.




7. HANDLING AND STORAGE
HANDLING
Avoid contact and inhalation. Do not get in eyes, on skin, on clothing. Wash thoroughly after handling. Transfer
methods should avoid static sparks. Do not eat, drink, or smoke in areas of use or storage.

STORAGE
Keep in a tightly closed container, stored in a cooled, dry, ventilated area away from sources of heat or ignition.
Protect from physical damage.

Room Temperature
STORAGE TEMPERATURE:


DISPOSAL
Observe all national, state, and local regulations regarding disposal.



Page 3 In-Flow ES
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
AIRBORNE EXPOSURE LIMITS:
Nalkylene
Component:
ACGIH Threshold Limit Value (TLV): none established
OSHA Permissible Exposure Limit (PEL):
Linear alkyl phenyl ethoxylates
Component:
none established
ACGIH Threshold Limit Value (TLV):
OSHA Permissible Exposure Limit (PEL):
ENGINEERING CONTROLS
A system of local and/or general exhaust is recommended. Local exhaust ventilation is generally preferred
because it can control the emissions of the contaminant at its source.

RESPIRATORY PROTECTION
For conditions of use where exposure to the substance is apparent, consult an industrial hygienist. For
emergencies, or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-
supplied respirator.

EYE PROTECTION
Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and
quick-drench facilities in work area.

SKIN PROTECTION
Wear protective gloves and clean body covering clothing.



OTHER CONTROL MEASURES
N.A.



9. PHYSICAL PROPERTIES
270 - 312 C Not measureable
Boiling Point Evaporation Rate

N.A. 30% by weight @ 20C
Melting Point Solubility in Water
< 0.1 mm HG N/D
Vapor Pressure pH
mm Hg
between 8 and 9 0.91
Vapor Density Specific Gravity
Air = 1 (H20 = 1)
100%
% Volatile by Volume

10. STABILITY AND REACTIVITY
STABILITY
Stable under ordinary conditions of use and storage.

CONDITIONS TO AVOID
Heat, sources of ignition.
HAZARDOUS DECOMPOSITION PRODUCTS
Combustion may produce toxic oxides of carbon, nitrogen, sulfur and reactive hydrocarbons.
HAZARDOUS POLYMERIZATION
Will not occur



INCOMPATIBLES
Nalkylene
Oxidizing agents.



Linear alkyl phenyl ethoxylates
Oxidizing agents.




Page 4 In-Flow ES
1-methoxy-2-(2-methoxyethoxy)ethane
No information found.



11. TOXICOLOGICAL INFORMATION
PRODUCT LD50 VALUES
In-Flow ES 46,000 mg/kg
Oral Rat LD50 (mg/kg):
In-Flow ES ND
Dermal Rabbit LD50 (mg/kg):

COMPONENT CANCER LIST STATUS
NTP Carcinogen
Component Known Anticipated IARC Category
Nalkylene No No None
Linear alkyl phenyl ethoxylates No No None
1-methoxy-2-(2-methoxyethoxy)ethane No No None

12. ECOLOGICAL INFORMATION
Nalkylene
This product has been evaluated for RCRA characteristics and does not meet the criteria of a hazardous waste if
discarded in its purchased form. Under RCRA is is the responsibility of the user to determine, at the time of disposal,
whether the product meets the criteria for hazardous waste.
Linear alkyl phenyl ethoxylates
This product has been evaluated for RCRA characteristics and does not meet the criteria of a hazardous waste if
discarded in its purchased form. Under RCRA is is the responsibility of the user to determine, at the time of disposal,
whether the product meets the criteria for hazardous waste.
1-methoxy-2-(2-methoxyethoxy)ethane
When released into the soil, this material may biodegrage to a moderate extent. When released into the soil, this
material is expected to quickly evaporate. When released into the soil, this material is expected to leach into the
groundwater. This material has an experimentally-determined biocencentration factor (BCF) of less than 100. This
material is not expected to significantly bioaccumulate. When released into the air, this material may be moderately
degraded by reaction with photochemically produced hydroxyl radicals. When released into the air, this material is not
expected to be subject to wet deposition. When released into the air, this material is expected to have a half-life of less
than 1 day.
13. DISPOSAL CONSIDERATIONS
Observe all national, state, and local regulations regarding disposal.


14. TRANSPORT INFORMATION
D.O.T.
Proper Shipping Name: Not regulated.

Hazard Class: N.A.
UN Number: N.A.
Packing Group: N.A.


I.A.T.A.
Proper Shipping Name: Not regulated.


Hazard Class: N.A.
UN Number: N.A.
Packing Group: N.A.

I.M.O.
Proper Shipping Name: Not regulated.


Hazard Class: N.A.
UN Number: N.A.
Packing Group: N.A.

Page 5 In-Flow ES
15. REGULATORY INFORMATION
UNITED STATES
TSCA Regulatory:
All intentional ingredients are listed on the TSCA Inventory.

SARA 311/312 Hazard Categories
Component Fire Pressure Reactivity Acute Chronic

Nalkylene No No No Yes No
Linear alkyl phenyl ethoxylates No No No Yes No
1-methoxy-2-(2-methoxyethoxy)ethane Yes No No Yes No
EUROPE
EEC Regulatory:
All intentional ingredients are listed on the European EINECS Inventory.


16. OTHER INFORMATION
NFPA CODES: Health: 1 Flammability: 1 Reactivity: 0

MANUFACTURER DISCLAIMER: The information given herein is offered in good faith as accurate, but without
guarantee. Conditions of use and suitability of the product for particular uses are beyond our control. All risks of use of
the product are therefore assumed by the user. Nothing is intended as a recommendation for uses which infringe valid
patents or as extending license under valid patents. Appropriate warnings and safe handling procedures should be
provided to handlers and users.




Page 6 In-Flow ES

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
imaging_mallinckrodt_com---Ascorbic_Acid_Injection.asp 50-81-7 139-33-3 7732-18-5 144-55-8
imaging_mallinckrodt_com---optiray.asp 87771-40-2 63-33-9 77-86-1
imc-group_com---Nickel_Nitrate_Crystal.asp 13478-00-7
imc-group_com---Stannous_sulfate_Powder_Flake.asp 7488-55-3
imperialdental_net---MSDS_Paste_Opaque.asp 12001-21-7 56-81-5 107-88-0
imscompany_com---120778-782-784-787-792-793-796-797-798-800.asp 8001-78-3 9003-13-8 8050-15-5 8012-89-3 7782-40-3
incolimited_com---INMETCOSpentLithiumIonBatterySolids.asp 7440-02-0 1313-99-1 7440-50-8 1317-38-0 7440-48-4 1307-96-6 1344-28-1 7789-24-4 24937-79-9
inco_com---CCCR-CREDEWBoshPondSolids-CanadianMSDS.asp 3333-67-3 39430-27-8 1184-64-1 12069-69-1 7542-09-8 12602-23-2 10102-50-8 14808-60-7 471-34-1
indeco_jp---bbot.asp 02-05-0 7128-64-5
indeco_jp---c450.asp 01-05-0 26078-25-1
indeco_jp---c478.asp 01-05-0 41175-45-5
indeco_jp---c480.asp 01-05-0 41267-76-9
indeco_jp---c485.asp 01-05-0 53518-14-2
indeco_jp---c490.asp 01-05-0 53518-15-3
indeco_jp---c503.asp 01-05-0 55804-70-1
indeco_jp---c504.asp 01-05-0 55804-66-5
indeco_jp---c521.asp 01-05-0 55804-67-6
indeco_jp---c523.asp 55804-68-7
indeco_jp---c535.asp 01-05-0 27425-55-4
indeco_jp---c540.asp 01-05-0 38215-36-0
indeco_jp---c540a.asp 01-05-0 53518-18-6
indeco_jp---di.asp 03-28-0 977-96-8
indeco_jp---dotci.asp 01-15-0 15185-43-0
indeco_jp---dtdci.asp 01-20-0 514-73-8
indeco_jp---j_znse.asp 1315-09-9
indeco_jp---nci.asp 03-28-0 4846-34-8
indeco_jp---sr640.asp 01-13-0 60311-02-6
industrialbolt_com---81120_Hardner.asp 140-31-8 112-24-3 90-72-2 112945-52-5 111-41-1 13474-96-9 103-76-4 111-40-0
industrialbolt_com---PenetratingOil.asp 8008-20-6 8052-41-3 74-98-6 75-28-5 106-97-8 64742-52-5
inflowes-msds.asp 129813-58-7 9016-45-9 111-96-6
ingredients_co_nz---FCC88_MSDS.asp 79-33-4
INMO030.asp 13939-06-5
insco-inc_com---Liquid_Air_Freshener_-_Citrus.asp 56539-66-3 7732-18-5
inspiralis_com---msds_topo_IV.asp 56-81-5 7365-45-9 3483-12-3 6381-92-6 19473-49-5 16674-78-5 987-65-5 9048-46-8
instaoffice_com---hewc1809a.asp 6920-22-5 7732-18-5
insulationfabricators_com---Childers_-_CP-45_Encacel_V_Spray_Grade_-_MSDS.asp 08-04-2 64742-95-6 95-63-6 68476-25-5 63449-39-8
interchim_com---MSDS-UP873358PhenolChoroform.asp 108-95-2 67-66-3 123-51-3
internationalbatteryinc_com---MSDS_083005.asp N/A
internationalepoxies_com---670A.asp 7534-94-3 868-77-9 79-41-4 11295-52-5 614-45-9 110-16-7 81-07-2
intertechnology_com---Denex_2000.asp 67-64-1 28064-14-4 78-93-3 80-08-0 25085-99-8 75-23-0
intertechnology_com---TEC-1.asp 110-71-4 113492-05-0 107-25-5
invitrogen_com---466225_MTR-NAIV_MS.asp 530-59-6
invivogen_com---MSDS_Puromycin.asp 58-58-2
inweldcorporation_com---Aluminum_Wire.asp 60676-86-0 1309-37-1 7440-50-8 7439-96-5 1309-48-4 1314-13-2 13463-67-7 7429-90-5 744-47-3 7440-41-7
iosh_gov_tw---msds1055.asp 78-87-5
iosh_gov_tw---msds1071.asp 95-95-4
iosh_gov_tw---msds1107.asp 120-82-1
iosh_gov_tw---msds1147.asp 540-73-8
irisdiagnostics_com---800-8551_AUTION_Sticks10EA.asp 81-75-6 9001-37-0 9003-99-0 83-07-8 313222-89-8 4430-25-5
irvingoil_com---03630_BUNKER_C_MSDS.asp 68553-00-4 50-32-8 7704-34-9 7783-04-6 1314-62-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC