DIOCTYL SEBACATE

                           MATERIAL SAFETY DATA SHEET

1. Product and Company Identification

 Product name                         DIOCTYL SEBACATE

 Synonyms                             Di-2-ethylhexyl Sebacate

 Chemical Formula                     C26H50O4

 Product Codes

                                      TONGXIANG JIAAO CHEMICAL CO., LTD.

 Supplier Information                 ADDRESS: NO.1 ECONOMIC DEVELOPMENT ZONE

                                      TONGXIANG,ZHEJIANG,CHINA

 Emergency phone numbers              86-573-8181727

2. Composition / Information on Ingredients

                 Ingredient                             CAS Number                    Percent (by weight)

         DIOCTYL SEBACATE                                122-62-3                            100%

3. Hazards Identification

                                Clear straw colored liquid; mild inoffensive odor.

 Potential Health Effects

 Skin Contact:            Repeated or prolonged skin contact may cause skin irritation.

 Eye Contact:             May cause slight eye irritation of susceptible persons.

 Ingestion:               Substance may be harmful if swallowed. May irritate mouth, throat and stomach.

 Inhalation:              May cause dizziness.

4. First-Aid Measures

 Inhalation             Person should be moved to a fresh air environment.

 Ingestion              Seek medical advice.

 Skin Contact           Wash affected skin with soap and water.Seek medical attention if symptoms persist.

 Eye Contact            Flush eyes with large amounts of water for at least 15 minutes.If irritation

                        persists,consult a physician.

5. Fire-Fighting Measures

 Extinguishing Media                      CO , Dry Chemical, Water Fog

 Unusual Fire and Explosion               Solid streams of water directed at burning liquid may cause frothing.

 Hazards:

 Special Firefighting Procedures          A MSHA/NIOSH approved self-contained breathing apparatus

                                          should be worn.

6. Accidental Release /Spill Procedures

 Steps to be Taken in          Dike and contain the spill with inert material (i.e., sand, earth, sawdust) and

 Case Material is              transfer liquid and solid diking material to separate containers for recovery or

 Released or Spilled:          disposal.Wash floor area with hot water solution.Remove contaminated

                               clothing and wash before reuse.Wash affected skin areas with soap and

                               water.Keep spills out of all sewers and bodies of water.

7. Handling and Storage

 Any use of this product in an elevated process should be evaluated to establish and maintain safe

 operating procedures.

 Containers should be kept tightly closed and stored in a dry well-ventilated place

8. Personal Protection

 OSHA Permissible               None established

 Exposure Limit (PEL):

 Hand Protection:               Impervious gloves

 Eye Protection:                Safety glasses

 Respiratory Protection:        None required for normal operation.

 Engineering Measures:          For normal operation, local exhaust ventilation should suffice. Direct

                                exhaust when material becomes heated and vapors are given off.

 Other:                         Eyewash facility in vicinity.

9. Physical and Chemical Properties

 Boiling Point:                                           Specific Gravity:          0.911

                                450-480°F

 Flash Point (COC):                                       Evaporation Rate:          N/A

                                432°F

 Vapor Density (Air=1):         14.5                      Solubility in Water:       Negligible

 Vapor Pressure (150C):         <0.1                      pH:                        N/A

 Appearance and Odor:           Clear straw colored liquid; mild inoffensive odor.

10. Stability and Reactivity

 Stability                             This product is stable under normal conditions.

 Conditions to Avoid                   Unknown

 Hazardous Polymerization:             Will not occur under normal circumstances.

11. Toxicological Information

 No information is available at this time.

12. Ecological Information

 This product does not contain any ozone depleting compounds (ODC’s).

13. Disposal Considerations

 Waste Disposal Methods:        Material should be disposed of in accordance to current local and national

                                regulations. Contacting a waste disposal service is recommended.

14. Transport Information

 Not classified as hazardous according to the Department of Transportation.

15. Regulatory Information

 Toxic Substances Control Act          This product is in compliance with the TSCA regulation of the United

 (TSCA):                               States.

 Domestic Substance List (DSL):        This product is listed on the DSL inventory of Canada.

 European Inventory of Existing        This product is listed on the EINECS inventory of Europe.Registration

 Chemical Substances (EINECS):         #:    204-558-8.

 Australian Inventory of Chemical      This product is listed on the AICS inventory of Australia.

 Substances (AICS):

16. Other Information



ALL OF THE MSDS DATA ARE FOR REFERENCE ONLY. THE USERS SHOULD JUDGE

THE USABILITY BY THEMSELVES.

                           Copyright (C) 2006 Jiaao Corporation.

                                  http://www.jahuag.com/