MATERIAL SAFETY DATA SHEET
TILE LAB GROUT HAZE REMOVER
HMIS
HEALTH 1
FLAMMABILITY 0
REACTIVITY 0
E
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
CUSTOM BUILDING PRODUCTS CUSTOM BUILDING PRODUCTS
10400 Pioneer Blvd., Unit #3 10400 Pioneer Blvd., Unit #3
Santa Fe Springs, CA 90670 UNITED STATES Santa Fe Springs, CA 90670 UNITED STATES
Company Contact: GEORGE MARCINA Company Contact: GEORGE MARCINA
Telephone Number: (562) 968-2980 Ext 103 Telephone Number: (562) 968-2980 Ext 103
FAX Number: (562) 903-2697 FAX Number: (562) 903-2697
E-Ma il: georgem@cbpmail.net E-Ma il: georgem@cbpmail.net
Web Site: www.custombuildingproducts.com Web Site: www.custombuildingproducts.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
GEORGE MARCINA: (562) 968-2980 GEORGE MARCINA: (562) 968-2980
Issue Date: 03/22/2006
Product Name: TILE LAB GROUT HAZE REMOVER
CAS Number: Not Established
Chemical Formula: Mixture
MSDS Number: 582
Product Code: 3062
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
GLYCOLIC ACID 79-14-1 5 - 15
3. Hazards Identification
Primary Routes(s) Of Entry
Inhalation
Skin Contact
Eye Contact
Ingestion
Eye Hazards
Can cause eye corrosion with corneal or conjunctional ulceration. Can cause permanent eye injury.
Skin Hazards
Can cause severe skin irritation. Prolonged exposure can cause skin burns or ulceration.
Ingestion Hazards
Ingestion maybe harmful. Seek medical attention. Swallowing may cause corrosion of mucous membranes and
stomach discomfort, nausea and prostration. Gross overexposure can cause kidney damage or even a fatality.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
TILE LAB GROUT HAZE REMOVER
3. Hazards Identification - Continued
Inhalation Hazards
Inhalation maybe cause irritation of mucous membranes and irritation of upper respiratory and bronchial tracts.
Subchronic (Target Organ Effects)
.
Chronic/Carcinogenicity Effects
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes.
Remove individual to fresh air. Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with plenty of water and wash with soap for at least 15 minutes. Remove
contaminated clothing. Get medical attention immediately if irritation (redness, rash, blistering) develops and
persists.
Ingestion
Get medical attention immediately. If the victim is unconscious or drowsy do not give anything by mouth. If the
individual is conscious and alert, immediately rinse mouth with water and give 2 glasses of water to drink.
Inhalation
If inhaled, remove to fresh air. Consult a physician immediately. Do not give an unconscious person anything to
drink. If necessary give artificial respiration. If breathing is difficult, give oxygen.
5. Fire Fighting Measures
Flash Point: N/A 掳F
Flash Point Method: N/A
Lower Explosive Limit: N/A
Upper Explosive Limit: N/A
Fire And Explosion Hazards
Material will not burn until dry.
Extinguishing Media
Foam, dry chemical, carbon dioxide, water.
Fire Fighting Instructions
Wear self contained breathing apparatus and protective suit.
6. Accidental Release Measures
Contain spill with inert material such as sand or earth. Transfer to suitable containers for disposal.
7. Handling And Storage
Handling And Storage Precautions
Use only with adequate ventilation.
Handling Precautions
Avoid contact with skin and clothing. Avoid contact with eyes. Wash contaminated clothing before re-use.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
TILE LAB GROUT HAZE REMOVER
7. Handling And Storage - Continued
Storage Precautions
Keep in cool and dry area.
Work/Hygienic Practices
Use good personal hygiene. Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate ventilation.
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Skin Protection
If hands or feet will be exposed, wear impervious gloves and/or boots.
Respiratory Protection
In case of inadequate ventilation and when exposed to dust above the recommended limits, wear a suitable
NIOSH-approved respirator.
9. Physical And Chemical Properties
Appearance
Clear liquid
Odor
May have very slight odor.
Chemical Type: Mixture
Physical State: Liquid
Boiling Point: 210 掳F 100 掳C
Specific Gravity: 1.1
Percent Volatiles: 95
Percent VOCs: 74g/l
Vapor Pressure: Same as water
Vapor Density: N/A
pH Factor: 1 - 2
Solubility: Dilutable
Viscosity: Water like
Evaporation Rate: N/A
10. Stability And Reactivity
Sta bility: STABLE
Hazardous Polymerization: WILL NOT OCCUR.
Conditions To Avoid (Stability)
Avoid heat.
Incompatible Materials
Strong oxidizing agents.
11. Toxicological Information
No Data Available...
Page 3 of 4
MATERIAL SAFETY DATA SHEET
TILE LAB GROUT HAZE REMOVER
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.
RCRA Information
Not considered RCRA Hazardous Waste.
14. Transport Information
DOT Shipping Label
NOT REGULATED
15. Regulatory Information
SARA Section 313 Notification
16. Other Information
HMIS Rating
He a lth: 1
Fire : 0
Re a ctivity: 0
Personal Protection: E
Revision/Preparer Information
MSDS Preparer: GEORGE MARCINA
MSDS Preparer Phone Number: (323) 582-0846
This MSDS Supercedes A Previous MSDS Dated: 03/20/2006
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no
representations as to the accuracy or completeness of the information contained therein, and assume no
responsibility regarding the suitablility of this information for the user's intended purposes or for the consequences of
its use. Each individual should make a determination as to the suitability of the information for their particular
purposes(s).
CUSTOM BUILDING PRODUCTS
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|