BondPak 7122 Adhesive Material Safety Data Sheet 1 of 13
MANUFACTURER:
BondPro Corporation Transportation Emergency
650 Brakke Drive Chemtrec: 800-424-9300
Hudson, WI 54016
Phone: 715-386-6206
Fax: 715-386-1462
ISSUSED: March 10, 2003
TRADE NAME:
BondPak 7122 Adhesive
This product is a kit which contains both the Part A and Part B
independently packaged in a duel cartridge syringe. An MSDS for each
of these components is included. Please do not separate the component
MSDSs from this cover page.
The information in this Material Safety Data Sheet (MSDS) is believed
to be correct as of the date issued. BONDPRO CORPORATION MAKES
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for
determining whether the BondPro Corporation product is fit for a
particular purpose and suitable for user鈥檚 methods of use or
application. Given the variety of factors that can affect the use and
application of a BondPro Corporation product, some of which are
uniquely within the user鈥檚 knowledge and control, it is essential that
the user evaluate the BondPro Corporation product to determine whether
it is fit for a particular purpose and suitable for user鈥檚 method of
use or application.
BondPro Corporation provides information in electronic form as a
service to its customers. Due to the remote possibility that
electronic transfer may have resulted in errors, omissions or
alterations in this information, BondPro Corporation makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
information in the MSDS available directly from BondPro Corporation.
BondPak 7122 Adhesive Material Safety Data Sheet 2 of 13
SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION
Page 1 of 6
MANUFACTURER:
BondPro Corporation Transportation Emergency
650 Brakke Drive Chemtrec: 800-424-9300
Hudson, WI 54016
Phone: 715-386-6206
Fax: 715-386-1462
ISSUED: May 17, 2001
TRADE NAME:
BondPro 7122 Adhesive part A Acrylic
SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS
SUBSTANCE DESCRIPTION CAS# PERCENT
METHYL METHACRYLATE 80-62-6 60.0 - 80.0
Acrylic polymer blend - Vendor Trade
Secret (V.T.S.) ++ Trade Secret 15.0 - 30.0
3,5-DIETHYL-1,2-DIHYDRO-1-PHENOL-2-
PROPYLPYRIDINE 34562-31-7 5.0 - 10.0
++ Material is a trade secret of our supplier and the CAS number is
unknown to BondPro.
This product contains the following toxic chemical or chemicals subject
to the reporting requirements of Section 313 of Title III of the
Emergency Planning and Community Right-To-Know Act of 1986 and 40 CFR
Part 372:
METHYL METHACRYLATE
SECTION 3. PHYSICAL DATA
BOILING POINT: 214.00 F
VAPOR PRESSURE: 29.0000 mmHg @ 68F
VAPOR DENSITY: 3.5 Air=1
EVAPORATION RATE: 3 BuOAc=1
SOLUBILITY IN WATER: moderate
SPECIFIC GRAVITY: 0.96 Water=1
PERCENT VOLATILE: 30.00 - 60.00 % by wt
pH: 4.5 - 5.5
VISCOSITY: 40000 - 60000 centipoise
MELTING POINT: N/D
APPEARANCE AND ODOR:
Paste, Off-white, pungent acrylic odor
BondPak 7122 Adhesive Material Safety Data Sheet 3 of 13
BondPro 7122 Adhesive part A Page 2 of 6
SECTION 4. FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: 51.00 F
FLAMMABLE LIMITS - LEL: 2.00 % by vol
FLAMMABLE LIMITS - UEL: 12.50 % by vol
AUTOIGNITION TEMPERATURE: N/D
EXTINGUISHING MEDIA:
Water, Carbon dioxide, Dry chemical, Foam
SPECIAL FIRE FIGHTING PROCEDURES:
Wear full protective clothing, including helmet, self-contained,
positive pressure or pressure demand breathing apparatus, bunker coat
and pants, bands around arms, waist and legs, face mask, and
protective covering for exposed areas of the head.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
See Hazardous Decomposition section for products of combustion.
Vapors may travel long distances along the ground or floor to an
ignition source and flash back.
NFPA HAZARD CODES: HEALTH: 2 FIRE: 3 REACTIVITY: 2
UNUSUAL REACTION HAZARD: none
SECTION 5. REACTIVITY DATA
STABILITY: Stable
INCOMPATIBILITY - MATERIALS/CONDITIONS TO AVOID:
Amines, Reducing Agents, Heat, Reactive Metals, Sparks and/or Flames.
Heat is generated during cure. Do not cure a mass larger than 50
grams in a confined space to prevent a premature reaction (exotherm)
with production of intense heat and smoke.
HAZARDOUS POLYMERIZATION: Hazardous polymerization may occur.
SECTION 6. ENVIRONMENTAL INFORMATION
SPILL RESPONSE:
Refer to other sections of this MSDS for information regarding
physical and health hazards, respiratory protection, ventilation, and
personal protective equipment. Ventilate area. Extinguish all
ignition sources. Collect spilled material. Place in an approved
metal container.
RECOMMENDED DISPOSAL:
Incinerate in an industrial or commercial facility in the presence of
a combustible material. Dispose of completely cured (or polymerized)
material in a sanitary landfill.
BondPak 7122 Adhesive Material Safety Data Sheet 4 of 13
BondPro 7122 Adhesive part A Page 3 of 6
ENVIRONMENTAL DATA:
Not determined.
REGULATORY INFORMATION:
Volatile Organic Compounds: 0.00 gms/liter.
VOC Less H2O & Exempt Solvents: 0.0 gms/liter.
Since regulations vary, consult applicable regulations or authorities
before disposal. In the event of an uncontrolled release of this
material, the user should determine if the release qualifies as a
reportable quantity.
EPCRA HAZARD CLASS:
FIRE HAZARD: Yes PRESSURE: No REACTIVITY: No ACUTE: Yes CHRONIC: Yes
Yes
SECTION 7. SUGGESTED FIRST AID
EYE CONTACT:
Immediately flush eyes with large amounts of water. Get immediate
medical attention.
SKIN CONTACT:
Wash affected area with soap and water.
INHALATION:
If signs/symptoms occur, remove person to fresh air. If
signs/symptoms continue, call a physician.
IF SWALLOWED:
Do not induce vomiting. Drink two glasses of water. Call a physician.
SECTION 8. PRECAUTIONARY INFORMATION
EYE PROTECTION:
Avoid eye contact. Wear vented goggles. Wear safety glasses with
side shields.
SKIN PROTECTION:
Avoid skin contact. Wear appropriate gloves when handling this
material. A pair of gloves made from the following material(s) are
recommended: butyl rubber, polyvinyl alcohol, fluoroelastomer
(Viton).
RECOMMENDED VENTILATION:
Curing ovens must be exhausted to outdoors or to a suitable emission
control device. If exhaust ventilation is not adequate, use
appropriate respiratory protection. Provide ventilation adequate to
control vapor concentrations below recommended exposure limits and/or
control spray or mist.
RESPIRATORY PROTECTION:
Avoid breathing of vapors created during the cure cycle. Avoid
prolonged breathing of vapors. Avoid breathing of dust created by
cutting, sanding or grinding. Select one of the following NIOSH
BondPak 7122 Adhesive Material Safety Data Sheet 5 of 13
BondPro 7122 Adhesive part A Page 4 of 6
approved respirators based on airborne concentration of contaminants
and in accordance with OSHA regulations: half-mask dust respirator,
half-mask organic vapor respirator, full-face organic vapor
respirator.
PREVENTION OF ACCIDENTAL INGESTION:
Wash hands after handling and before eating. Do not ingest.
RECOMMENDED STORAGE:
Store in a cool place. Store away from heat. Keep container dry.
Keep container in well-ventilated area. Keep out of the reach of
children.
FIRE AND EXPLOSION AVOIDANCE:
Keep container tightly closed. Flammable liquid and vapor. Keep
away from heat, sparks, open flame, and other sources of ignition.
No smoking while handling this material. Do not heat under confinement.
EXPOSURE LIMITS
INGREDIENT VALUE UNIT TYPE AUTH SKIN*
METHYL METHACRYLATE 100 PPM TWA OSHA
METHYL METHACRYLATE 50 PPM TWA ACGIH
SENSITIZER
METHYL METHACRYLATE 100 PPM STEL ACGIH
SENSITIZER
Acrylic polymer blend - Vendor
Trade Secret (V.T.S.) ++ NONE NONE NONE NONE
3,5-DIETHYL-1,2-DIHYDRO-1-PHENOL-2-
PROPYLPYRIDINE NONE NONE NONE NONE
*SKIN NOTATION: Listed substances indicated with 'Y' under SKIN
refer to the potential contribution to the overall exposure by the
cutaneous route including mucous membrane and eye, either by
airborne or, more particularly, by direct contact with the
substance. Vehicles can alter skin absorption.
++ Material is a trade secret of our supplier and the CAS number is
unknown to BondPro.
SOURCE OF EXPOSURE LIMIT DATA:
- ACGIH: American Conference of Governmental Industrial Hygienists
- OSHA: Occupational Safety and Health Administration
- NONE: None Established
SECTION 9. HEALTH HAZARD DATA
EYE CONTACT:
Moderate Eye Irritation: signs/symptoms can include redness, swelling,
pain, tearing, and hazy vision.
Vapors from heated material may cause eye irritation.
BondPak 7122 Adhesive Material Safety Data Sheet 6 of 13
BondPro 7122 Adhesive part A Page 5 of 6
Dust created by cutting, grinding, sanding, or machining may cause
eye irritation.
SKIN CONTACT:
Allergic Skin Reaction: signs/symptoms can include redness, swelling,
blistering, and itching.
Moderate Skin Irritation: signs/symptoms can include redness,
swelling, itching, and dryness.
INHALATION:
Illness may occur after a single overexposure by inhalation to
relatively large quantities of this material.
Nervous System Effects: signs/symptoms can include emotional changes,
lack of coordination, tremors and sensory loss.
Central Nervous System Depression: signs/symptoms can include
headache, dizziness, drowsiness, incoordination, slowed reaction time,
slurred speech, giddiness and unconsciousness.
Irritation (upper respiratory): signs/symptoms can include soreness
of the nose and throat, coughing and sneezing.
Vapors of heated material may cause respiratory system irritation.
Dust from cutting, grinding, sanding or machining may cause
irritation of the respiratory system.
IF SWALLOWED:
Irritation of Gastrointestinal Tissues: signs/symptoms can include
pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and
blood in feces.
REPRODUCTIVE/DEVELOPMENTAL TOXINS:
METHYL METHACRYLATE (80-62-6) is not classifiable as to its potential
reproductive effects in humans.
Abbreviations: N/D - Not Determined N/A - Not Applicable CA -
Approximately
The information in this Material Safety Data Sheet (MSDS) is believed
to be correct as of the date issued. BONDPRO CORPORATION MAKES
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for
determining whether the BondPro Corporation product is fit for a
particular purpose and suitable for user鈥檚 methods of use or
application. Given the variety of factors that can affect the use and
application of a BondPro Corporation product, some of which are
uniquely within the user鈥檚 knowledge and control, it is essential that
the user evaluate the BondPro Corporation product to determine whether
it is fit for a particular purpose and suitable for user鈥檚 method of
use or application.
BondPak 7122 Adhesive Material Safety Data Sheet 7 of 13
BondPro 7122 Adhesive part A Page 6 of 6
BondPro Corporation provides information in electronic form as a
service to its customers. Due to the remote possibility that
electronic transfer may have resulted in errors, omissions or
alterations in this information, BondPro Corporation makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
information in the MSDS available directly from BondPro Corporation.
BondPak 7122 Adhesive Material Safety Data Sheet 8 of 13
SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION
Page 1 of 6
MANUFACTURER:
BondPro Corporation Transportation Emergency
650 Brakke Drive Chemtrec: 800-424-9300
Hudson, WI 54016
Phone: 715-386-6206
Fax: 715-386-1462
Issued: May 17, 2001
TRADE NAME:
BondPak 7122 Adhesive part B Acrylic
SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS
SUBSTANCE DESCRIPTION CAS# PERCENT
METHYL METHACRYLATE 80-62-6 60.0 - 80.0
acrylic polymer blend - Vendor Trade
Secret (V.T.S.) ++ TradeSecret 15.0 - 30.0
3,5-DIETHYL-1,2-DIHYDRO-1-PHENOL-2-
PROPYLPYRIDINE 34562-31-7 5.0 - 10.0
++ Material is a trade secret of our supplier and the CAS number is
unknown to BondPro.
This product contains the following toxic chemical or chemicals subject
to the reporting requirements of Section 313 of Title III of the
Emergency Planning and Community Right-To-Know Act of 1986 and 40 CFR
Part 372: METHYL METHACRYLATE
SECTION 3. PHYSICAL DATA
BOILING POINT: 214.00 F
VAPOR PRESSURE: 29.0000 mmHg
@ 68F
VAPOR DENSITY: 3.5 Air=1
EVAPORATION RATE: 3 BuOAc=1
SOLUBILITY IN WATER: moderate
SPECIFIC GRAVITY: 0.96 Water=1
PERCENT VOLATILE: 30.00 - 60.00 % by wt
pH: 4.5 - 5.5
VISCOSITY: 40000 - 60000 centipoise
MELTING POINT: N/D
APPEARANCE AND ODOR:
Paste, Off-white, pungent acrylic odor
BondPak 7122 Adhesive Material Safety Data Sheet 9 of 13
BondPak 7122 Adhesive part B Page 2 of 6
SECTION 4. FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: 51.00 F
FLAMMABLE LIMITS - LEL: 2.00 % by vol
FLAMMABLE LIMITS - UEL: 12.50 % by vol
AUTOIGNITION TEMPERATURE: N/D
EXTINGUISHING MEDIA:
Water, Carbon dioxide, Dry chemical, Foam
SPECIAL FIRE FIGHTING PROCEDURES:
Wear full protective clothing, including helmet, self-contained,
positive pressure or pressure demand breathing apparatus, bunker coat
and pants, bands around arms, waist and legs, face mask, and
protective covering for exposed areas of the head.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
See Hazardous Decomposition section for products of combustion.
Vapors may travel long distances along the ground or floor to an
ignition source and flash back.
NFPA HAZARD CODES: HEALTH: 2 FIRE: 3 REACTIVITY: 2
UNUSUAL REACTION HAZARD: none
SECTION 5. REACTIVITY DATA
STABILITY: Stable
INCOMPATIBILITY - MATERIALS/CONDITIONS TO AVOID:
Amines, Reducing Agents, Heat, Reactive Metals, Sparks and/or Flames.
Heat is generated during cure. Do not cure a mass larger than 50
grams in a confined space to prevent a premature reaction (exotherm)
with production of intense heat and smoke.
HAZARDOUS POLYMERIZATION: Hazardous polymerization may occur.
HAZARDOUS DECOMPOSITION PRODUCTS:
Carbon Monoxide and Carbon Dioxide, Oxides of Nitrogen, Toxic Vapors,
Gases or Particulates.
SECTION 6. ENVIRONMENTAL INFORMATION
SPILL RESPONSE:
Refer to other sections of this MSDS for information regarding physical
and health hazards, respiratory protection, ventilation, and personal
protective equipment. Cover with absorbent material. Collect spilled
material. Place in a U.S. DOT-approved container.
BondPak 7122 Adhesive Material Safety Data Sheet 10 of 13
BondPak 7122 Adhesive part B Page 3 of 6
RECOMMENDED DISPOSAL:
Cure product according to product instructions. Incinerate in an
industrial or commercial facility in the presence of a combustible
material. Dispose of completely cured (or polymerized) material in a
sanitary landfill.
ENVIRONMENTAL DATA:
Not determined.
REGULATORY INFORMATION:
Volatile Organic Compounds: 0.00 gms/liter.
VOC Less H2O & Exempt Solvents: 0.0 gms/liter.
Since regulations vary, consult applicable regulations or authorities
before disposal. In the event of an uncontrolled release of this
material, the user should determine if the release qualifies as a
reportable quantity.
EPCRA HAZARD CLASS:
FIRE HAZARD: Yes PRESSURE: No REACTIVITY: No ACUTE: Yes CHRONIC: Yes
SECTION 7. SUGGESTED FIRST AID
EYE CONTACT:
Immediately flush eyes with large amounts of water for at least 15
minutes. Get immediate medical attention.
SKIN CONTACT:
Wash affected area with soap and water.
INHALATION:
If signs/symptoms occur, remove person to fresh air. If signs/symptoms
continue, call a physician.
IF SWALLOWED:
Do not induce vomiting. Drink two glasses of water. Call a physician.
SECTION 8. PRECAUTIONARY INFORMATION
EYE PROTECTION:
Avoid eye contact. Wear ventilated goggles. Where safety Glasses with
side shields.
SKIN PROTECTION:
Avoid skin contact. Wear appropriate gloves when handling this
material. A pair of gloves made from the following material(s) are
recommended: butyl rubber, polyvinyl alcohol, fluoroelastomer
(Viton).
RECOMMENDED VENTILATION:
Curing ovens must be exhausted to outdoors or to a suitable emission
control device. If exhaust ventilation is not adequate, use
appropriate respiratory protection. Provide ventilation adequate to
BondPak 7122 Adhesive Material Safety Data Sheet 11 of 13
BondPak 7122 Adhesive part B Page 4 of 6
control vapor concentrations below recommended exposure limits and/or
control spray or mist.
RESPIRATORY PROTECTION:
Avoid breathing of vapors. Avoid breathing of dust created by cutting,
sanding or grinding. Select one of the following NIOSH approved
respirators based on airborne concentration of contaminants and in
accordance with OSHA regulations: half-mask dust respirator.
PREVENTION OF ACCIDENTAL INGESTION:
Wash hands after handling and before eating. Do not ingest.
RECOMMENDED STORAGE:
Store in a cool place. Store away from heat. Keep container dry.
Keep container in well-ventilated area. Keep out of the reach of
children.
FIRE AND EXPLOSION AVOIDANCE:
Keep container tightly closed. Flammable liquid and vapor. Keep
away from heat, sparks, open flame, and other sources of ignition.
No smoking while handling this material. Do not heat under confinement.
EXPOSURE LIMITS
INGREDIENT VALUE UNIT TYPE AUTH SKIN*
METHYL METHACRYLATE 100 PPM TWA OSHA
METHYL METHACRYLATE 50 PPM TWA ACGIH
SENSITIZER
METHYL METHACRYLATE 100 PPM STEL ACGIH
SENSITIZER
Acrylic polymer blend - Vendor
Trade Secret (V.T.S.) ++ NONE NONE NONE NONE
3,5-DIETHYL-1,2-DIHYDRO-1-PHENOL-2-
PROPYLPYRIDINE NONE NONE NONE NONE
*SKIN NOTATION: Listed substances indicated with 'Y' under SKIN
refer to the potential contribution to the overall exposure by the
cutaneous route including mucous membrane and eye, either by
airborne or, more particularly, by direct contact with the
substance. Vehicles can alter skin absorption.
SOURCE OF EXPOSURE LIMIT DATA:
- ACGIH: American Conference of Governmental Industrial Hygienists
- OSHA: Occupational Safety and Health Administration
- NONE: None Established
SECTION 9. HEALTH HAZARD DATA
EYE CONTACT:
Moderate Eye Irritation: signs/symptoms can include redness, swelling,
pain, tearing, and hazy vision.
BondPak 7122 Adhesive Material Safety Data Sheet 12 of 13
BondPak 7122 Adhesive part B Page 5 of 6
Vapors from heated material may cause eye irritation.
Dust created by cutting, grinding, sanding, or machining may cause
eye irritation.
SKIN CONTACT:
Allergic Skin Reaction: signs/symptoms can include redness, swelling,
blistering, and itching.
Moderate Skin Irritation: signs/symptoms can include redness,
swelling, itching, and dryness.
INHALATION:
Illness may occur after a single overexposure by inhalation to
relatively large quantities of this material.
Nervous System Effects: signs/symptoms can include emotional changes,
lack of coordination, tremors and sensory loss.
Central Nervous System Depression: signs/symptoms can include
headache, dizziness, drowsiness, incoordination, slowed reaction time,
slurred speech, giddiness and unconsciousness.
Irritation (upper respiratory): signs/symptoms can include soreness
of the nose and throat, coughing and sneezing.
Vapors of heated material may cause respiratory system irritation.
Dust from cutting, grinding, sanding or machining may cause
irritation of the respiratory system.
IF SWALLOWED:
Irritation of Gastrointestinal Tissues: signs/symptoms can include
pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and
blood in feces.
REPRODUCTIVE/DEVELOPMENTAL TOXINS:
METHYL METHACRYLATE (80-62-6) is not classifiable as to its potential
reproductive effects in humans.
Abbreviations: N/D - Not Determined N/A - Not Applicable CA -
Approximately
The information in this Material Safety Data Sheet (MSDS) is believed
to be correct as of the date issued. BONDPRO CORPORATION MAKES
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for
determining whether the BondPro Corporation product is fit for a
particular purpose and suitable for user鈥檚 methods of use or
application. Given the variety of factors that can affect the use and
application of a BondPro
Corporation product, some of which are uniquely within the user鈥檚
knowledge and control, it is essential that the user evaluate the
BondPro Corporation product to determine whether it is fit for a
particular purpose and suitable for user鈥檚 method of use or
application.
BondPak 7122 Adhesive Material Safety Data Sheet 13 of 13
BondPak 7122 Adhesive part B Page 6 of 6
BondPro Corporation provides information in electronic form as a
service to its customers. Due to the remote possibility that
electronic transfer may have resulted in errors, omissions or
alterations in this information, BondPro Corporation makes no
representations as to its completeness or accuracy. In addition,
information obtained from a database may not be as current as the
information in the MSDS available directly from BondPro Corporation.
|