BondPak 7513 Adhesive     Material Safety Data Sheet          1 of 12





MANUFACTURER:

BondPro Corporation                            Transportation Emergency

650 Brakke Drive                                Chemtrec: 800-424-9300

Hudson, WI 54016

Phone: 715-386-6206

Fax: 715-386-1462

ISSUSED: March 10, 2003



TRADE NAME:



BondPak 7513 Adhesive





This product is a kit which contains both the Part A and Part B

independently packaged in a duel cartridge syringe. An MSDS for each

of these components is included. Please do not separate the component

MSDSs from this cover page.









The information in this Material Safety Data Sheet (MSDS) is believed

to be correct as of the date issued. BONDPRO CORPORATION MAKES

WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE



OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for

determining whether the BondPro Corporation product is fit for a

particular purpose and suitable for user’s methods of use or

application. Given the variety of factors that can affect the use and

application of a BondPro Corporation product, some of which are

uniquely within the user’s knowledge and control, it is essential that

the user evaluate the BondPro Corporation product to determine whether

it is fit for a particular purpose and suitable for user’s method of

use or application.



BondPro Corporation provides information in electronic form as a

service to its customers. Due to the remote possibility that

electronic transfer may have resulted in errors, omissions or

alterations in this information, BondPro Corporation makes no

representations as to its completeness or accuracy. In addition,

information obtained from a database may not be as current as the

information in the MSDS available directly from BondPro Corporation.

BondPak 7513 Adhesive     Material Safety Data Sheet              2 of 12









   SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION

                                                               Page 1 of 5

MANUFACTURER:

BondPro Corporation                            Transportation Emergency

650 Brakke Drive                                Chemtrec: 800-424-9300

Hudson, WI 54016

Phone: 715-386-6206

Fax: 715-386-1462

May 30, 2001



TRADE NAME:



BondPro 7513 Adhesive part A



      SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS



SUBSTANCE DESCRIPTION                CAS#               PERCENT

SYNTHETIC RUBBER OLIGOMER            TradeSecret       40 - 70

POLYFUNCTIONAL AZIRIDINE             64265-57-2        10 - 30

COMPLEXED AMINE/POLYOL BLEND         TradeSecret       1.0 - 5.0

AMORPHOUS SILICA                     7631-86-9         1.0 - 5.0



This material is not on EINECS and should be used in Europe only for

research purposes in order to establish its properties. The

components of this product are in compliance with the chemical

notification requirements of TSCA



                        SECTION 3. PHYSICAL DATA



BOILING POINT:                                    N/A

VAPOR PRESSURE:                                  < 0.1 mmHg

VAPOR DENSITY:                                    N/D

EVAPORATION RATE:                                 N/D

SOLUBILITY IN WATER:                              slight

SPECIFIC GRAVITY:                                 1.028 g/cc

PERCENT VOLATILE:                    7.9 % by wt ASTM D2369 @110 C

pH:                                               N/A

VISCOSITY:                                 25000 - 35000 centipoise

MELTING POINT:                                    N/A



APPEARANCE AND ODOR:

Paste, WHITE, MILD ODOR



              SECTION 4. FIRE AND EXPLOSION HAZARD DATA



FLASH POINT:                                       223 F Setaflash

FLAMMABLE LIMITS - LEL:                            N/D

FLAMMABLE LIMITS - UEL:                            N/D

AUTOIGNITION TEMPERATURE:                          N/D

BondPak 7513 Adhesive    Material Safety Data Sheet           3 of 12





                                BondPro 7513 Adhesive part A Page 2 of 5

EXTINGUISHING MEDIA:

Water spray, Carbon dioxide, Dry chemical, Foam



SPECIAL FIRE FIGHTING PROCEDURES:

Wear full protective clothing, including helmet, self-contained,

positive pressure or pressure demand breathing apparatus, bunker coat

and pants, bands around arms, waist and legs, face mask, and

protective covering for exposed areas of the head.



UNUSUAL FIRE AND EXPLOSION HAZARDS:

Not determined.



NFPA HAZARD CODES: HEALTH: 2 FIRE: 2 REACTIVITY: 0



UNUSUAL REACTION HAZARD: none



OSHA FIRE HAZARD CLASS: Class II Combustible Liquid







                      SECTION 5. REACTIVITY DATA



STABILITY: Stable



INCOMPATIBILITY - MATERIALS/CONDITIONS TO AVOID:

Strong Acids, Heat.



HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.



HAZARDOUS DECOMPOSITION PRODUCTS:

Carbon Monoxide and Carbon Dioxide, Oxides of Nitrogen, Aldehydes,

Amine Compounds, Toxic Vapors, Gases or Particulates.





             SECTION 6. ENVIRONMENTAL INFORMATION



SPILL RESPONSE:

Refer to other sections of this MSDS for information regarding

physical and health hazards, respiratory protection, ventilation, and

personal protective equipment. Extinguish all ignition sources.

Contain spill. Cover with inorganic absorbent material. Cover with

water. Collect spilled material. Clean up residue. Place in a

closed container. Cloth or paper contaminated with adhesive should be

disposed of in a metal container, covered with water and container

sealed.



RECOMMENDED DISPOSAL:

Incinerate in an industrial or commercial facility. Do not dispose

of in a sanitary landfill.



ENVIRONMENTAL DATA:

Not applicable.



REGULATORY INFORMATION:

Volatile Organic Compounds: 81 gms/liter South Coast Air Quality Mgmt

Dist Method.

BondPak 7513 Adhesive   Material Safety Data Sheet            4 of 12





                                BondPro 7513 Adhesive part A Page 3 of 5



VOC Less H2O & Exempt Solvents: 81 gms/liter South Coast Air Quality

Mgmt Dist Method.

Since regulations vary, consult applicable regulations or authorities

before disposal. In the event of an uncontrolled release of this

material, the user should determine if the release qualifies as a

reportable quantity.

When components B & A are mixed at a 10:1 ratio, the specific gravity

of the mixture is 1.006 . The VOC content (less water and exempt

solvent) for the mixture is 218 g/l



EPCRA HAZARD CLASS:

FIRE HAZARD: Yes PRESSURE: No REACTIVITY: No ACUTE: Yes CHRONIC: No



                  SECTION 7. SUGGESTED FIRST AID

EYE CONTACT:

Immediately flush eyes with large amounts of water for at least 15

minutes. Get immediate medical attention.



SKIN CONTACT:

Immediately flush skin with large amounts of water. Remove

contaminated clothing. If irritation persists, call a physician. Wash

contaminated clothing before reuse.



INHALATION:

If signs/symptoms occur, remove person to fresh air. If

signs/symptoms continue, call a physician.



IF SWALLOWED:

Do not induce vomiting. Drink two glasses of water. Call a physician.



              SECTION 8. PRECAUTIONARY INFORMATION



EYE PROTECTION:

Avoid eye contact. Wear safety glasses with side shields.



SKIN PROTECTION:

Avoid skin contact. Wear appropriate gloves when handling this

material. A pair of gloves made from the following material(s) are

recommended: butyl rubber, nitrile rubber, polyethylene, polyvinyl

alcohol.



RECOMMENDED VENTILATION:

Do not use in a confined area or areas with little or no air

movement. Provide appropriate local exhaust when product is heated.

Use in a well-ventilated area. If exhaust ventilation is not

adequate, use appropriate respiratory protection.



RESPIRATORY PROTECTION:

Avoid breathing of vapors. half-mask organic vapor respirator, full-

face organic vapor respirator.



PREVENTION OF ACCIDENTAL INGESTION:

Wash hands after handling and before eating. Do not ingest.

BondPak 7513 Adhesive    Material Safety Data Sheet                5 of 12





                                BondPro 7513 Adhesive part A Page 4 of 5



RECOMMENDED STORAGE:

Store away from acids. Store away from heat. Keep container dry.



FIRE AND EXPLOSION AVOIDANCE:

Keep container tightly closed. Keep away from heat, sparks, open

flame, and other sources of ignition. Combustible liquid and vapor.



OTHER PRECAUTIONARY INFORMATION:

Not intended for consumer sale or use.

When equalizing plungers, prior to use, dispense unmixed adhesive

onto a clean, solvent-free, non-porous surface such as aluminum foil,

glass or a metal can. Do not dispense unmixed adhesive onto paper or

cloth towels or rags.



                             EXPOSURE LIMITS

INGREDIENT                          VALUE UNIT     TYPE   AUTH   SKIN*

SYNTHETIC RUBBER OLIGOMER            NONE NONE     NONE   NONE

POLYFUNCTIONAL AZIRIDINE             NONE NONE     NONE   NONE

COMPLEXED AMINE/POLYOL BLEND         NONE NONE     NONE   NONE

AMORPHOUS SILICA                     3     MG/M3   TWA    CMRG

                         AS RESPIRABLE DUST



* SKIN NOTATION: Listed substances indicated with 'Y' under SKIN refer

to the potential contribution to the overall exposure by the cutaneous

route including mucous membrane and eye, either by airborne or, more

particularly, by direct contact with the substance. Vehicles can alter

skin absorption.



SOURCE OF EXPOSURE LIMIT DATA:

- CMRG: Chemical Manufacturer Recommended Exposure Guidelines

- NONE: None Established





                  SECTION 9. HEALTH HAZARD DATA



EYE CONTACT:

Chemical Related Eye Burns (chemical corrosivity): signs/symptoms can

include cloudy appearance of the cornea, chemical burns, pain,

tearing, ulcers, impaired vision or loss of vision.



SKIN CONTACT:

Allergic Skin Reaction: signs/symptoms can include redness, swelling,

blistering, and itching.

Severe Skin Irritation (after prolonged or repeated contact):

signs/symptoms can include redness, swelling, itching, dryness,

cracking, blistering, and pain. May be absorbed through the skin and

produce effects similiar to those caused by inhalation and/or

ingestion.



INHALATION:

Health effects from inhalation are not expected unless product is

heated.

Allergic Respiratory Reaction: signs/symptoms can include difficulty

BondPak 7513 Adhesive   Material Safety Data Sheet              6 of 12





                                BondPro 7513 Adhesive part A Page 5 of 5



breathing, wheezing, tightness of chest, and respiratory failure.

Irritation (upper respiratory): signs/symptoms can include soreness

of the nose and throat, coughing and sneezing.





WHILE THE FOLLOWING EFFECTS ARE ASSOCIATED WITH ONE OR MORE OF THE

INDIVIDUAL INGREDIENTS IN THIS PRODUCT AND ARE REQUIRED TO BE

INCLUDED ON THE MSDS BY THE U.S. OSHA HAZARD COMMUNICATION STANDARD,

THEY ARE NOT EXPECTED EFFECTS DURING FORESEEABLE USE OF THIS PRODUCT.

Kidney Effects: signs/symptoms can include reduced urine volume,

blood in urine and back pain.

Liver Effects: signs/symptoms can include yellow skin(jaundice) and

tenderness of upper abdomen.



IF SWALLOWED:

Illness may occur after a single swallowing of relatively large

quantities of this material.

Irritation of Gastrointestinal Tissues: signs/symptoms can include

pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and

blood in feces.

Liver Effects: signs/symptoms can include yellow skin(jaundice) and

tenderness of upper abdomen.





Abbreviations: N/D - Not Determined N/A - Not Applicable CA -

Approximately









The information in this Material Safety Data Sheet (MSDS) is believed

to be correct as of the date issued. BONDPRO CORPORATION MAKES

WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE



OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for

determining whether the BondPro Corporation product is fit for a

particular purpose and suitable for user’s methods of use or

application. Given the variety of factors that can affect the use and

application of a BondPro



Corporation product, some of which are uniquely within the user’s

knowledge and control, it is essential that the user evaluate the

BondPro Corporation product to determine whether it is fit for a

particular purpose and suitable for user’s method of use or

application.



BondPro Corporation provides information in electronic form as a

service to its customers. Due to the remote possibility that

electronic transfer may have resulted in errors, omissions or

alterations in this information, BondPro Corporation makes no

representations as to its completeness or accuracy. In addition,

information obtained from a database may not be as current as the

information in the MSDS available directly from BondPro Corporation.

BondPak 7513 Adhesive     Material Safety Data Sheet               7 of 12









   SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION

                                                                  Page 1 of 6

MANUFACTURER:

BondPro Corporation                                 Transportation Emergency

650 Brakke Drive                                     Chemtrec: 800-424-9300

Hudson, WI 54016

Phone: 715-386-6206

Fax: 715-386-1462

Issued: June 25, 2001



TRADE NAME:



BondPak 7513 Adhesive part B



      SECTION 2. COMPOSITION/INFORMATION ON INGREDIENTS



SUBSTANCE DESCRIPTION                        CAS#                PERCENT

METHACRYLATE                                2455-24-5            40 - 70

ACRYLONITRILE-BUTADIENE-STYRENE RESIN       9003-56-9            10 - 30

DIBUTYL ITACONATE                           2155-60-4            5.0 - 10.0

SYNTHETIC RUBBER OLIGOMER                   TradeSecret          1.0 - 5.0

MICROSPHERES                                66402-68-4           1-5

IMPACT MODIFIER                             20882-04-6           0.5 - 1.5



This material is not on EINECS and should be used in Europe only for

research purposes in order to establish its properties. The

components of this product are in compliance with the chemical

notification requirements of TSCA.



                        SECTION 3. PHYSICAL DATA



BOILING POINT:                         N/D

VAPOR PRESSURE:                        < 0.1 mmHg

VAPOR DENSITY:                         N/D

EVAPORATION RATE:                      N/D

SOLUBILITY IN WATER:                   slight

SPECIFIC GRAVITY:                      1.009 g/cc

PERCENT VOLATILE:                      59.47 % ASTM @ 110 degrees C

pH:                                    N/A

VISCOSITY:                             25000-35000 centipoise

MELTING POINT:                                      N/A



APPEARANCE AND ODOR:

Paste, pink/amber, mild acrylic odor

BondPak 7513 Adhesive   Material Safety Data Sheet              8 of 12









                                BondPak 7513 Adhesive part B Page 2 of 6



           SECTION 4. FIRE AND EXPLOSION HAZARD DATA





FLASH POINT:                                       206 F Setaflash

FLAMMABLE LIMITS - LEL:                            N/D

FLAMMABLE LIMITS - UEL:                            N/D

AUTOIGNITION TEMPERATURE:                          N/D



EXTINGUISHING MEDIA:

Water spray, Carbon dioxide, Dry chemical, Foam



SPECIAL FIRE FIGHTING PROCEDURES:

Wear full protective clothing, including helmet, self-contained,

positive pressure or pressure demand breathing apparatus, bunker coat

and pants, bands around arms, waist and legs, face mask, and

protective covering for exposed areas of the head.



UNUSUAL FIRE AND EXPLOSION HAZARDS:

Not determined.



NFPA HAZARD CODES: HEALTH: 2 FIRE: 3 REACTIVITY: 0



UNUSUAL REACTION HAZARD: none



OSHA FIRE HAZARD CLASS: IB Flammable Liquid



                    SECTION 5. REACTIVITY DATA



STABILITY: Stable



INCOMPATIBILITY - MATERIALS/CONDITIONS TO AVOID:

Strong Acids, Heat.



HAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur.



HAZARDOUS DECOMPOSITION PRODUCTS:

Carbon Monoxide and Carbon Dioxide, Oxides of Nitrogen, Aldehydes,

Amine Compounds, Toxic Vapors, Gases or Particulates.





             SECTION 6. ENVIRONMENTAL INFORMATION



SPILL RESPONSE:

Refer to other sections of this MSDS for information regarding

physical and health hazards, respiratory protection, ventilation, and

personal protective equipment. Extinguish all ignition sources.

Contain spill. Cover with inorganic absorbent material. Cover with

water. Collect spilled material. Clean up residue. Place in a

closed container. Cloth or paper contaminated with adhesive should be

disposed of in a metal container, covered with water and container

sealed.

BondPak 7513 Adhesive    Material Safety Data Sheet              9 of 12





                                BondPak 7513 Adhesive part B Page 3 of 6



RECOMMENDED DISPOSAL:

Incinerate in an industrial or commercial facility. Do not dispose

of in a sanitary landfill.



ENVIRONMENTAL DATA:

No data available.



REGULATORY INFORMATION:

Volatile Organic Compounds: 597 gms/liter South Coast Air Quality Mgmt

Dist Method.

VOC Less H2O & Exempt Solvents: 597 gms/liter South Coast Air Quality

Mgmt Dist Method.

Since regulations vary, consult applicable regulations or authorities

before disposal. In the event of an uncontrolled release of this

material, the user should determine if the release qualifies as a

reportable quantity.

When components B & A are mixed at a 10:1 ratio, the specific gravity

of the mixture is 1.006 g/cc. The VOC content (less water and exempt

solvent) for the mixture is 218 g/l



EPCRA HAZARD CLASS:

FIRE HAZARD: Yes PRESSURE: No REACTIVITY: No ACUTE: Yes CHRONIC: No



                   SECTION 7. SUGGESTED FIRST AID

EYE CONTACT:

Immediately flush eyes with large amounts of water. Get immediate

medical attention.



SKIN CONTACT:



Flush skin with large amounts of water. If irritation persists, get

medical attention.



INHALATION:

Remove person to fresh air. If not breathing, give artificial

respiration. If breathing is difficult, get immediate medical

attention.



IF SWALLOWED:

Do not induce vomiting. Drink two glasses of water. Call a physician



                SECTION 8. PRECAUTIONARY INFORMATION



EYE PROTECTION:

Avoid eye contact. Wear safety glasses with side shields.



SKIN PROTECTION:

Wear appropriate gloves when handling this material. A pair of

gloves made from the following material(s) are recommended: butyl

rubber, nitrile rubber, polyethylene, polyvinyl alcohol.



RECOMMENDED VENTILATION:

Use with appropriate local exhaust ventilation. Use in a well-

BondPak 7513 Adhesive   Material Safety Data Sheet                  10 of 12





                                  BondPak 7513 Adhesive part B Page 4 of 6



ventilated area. If exhaust ventilation is not adequate, use

appropriate respiratory protection.



RESPIRATORY PROTECTION:

Avoid breathing of vapors. half-mask organic vapor respirator, full-

face organic vapor respirator.



PREVENTION OF ACCIDENTAL INGESTION:

Do not ingest.



RECOMMENDED STORAGE:

Store away from acids. Store away from heat. Keep container dry.



FIRE AND EXPLOSION AVOIDANCE:

Keep container tightly closed. Keep away from heat, sparks, open

flame, and other sources of ignition. Combustible liquid and vapor.



OTHER PRECAUTIONARY INFORMATION:

Not intended for consumer sale or use.

When equalizing plungers, prior to use, dispense unmixed adhesive

on to a clean, solvent free non-porous surface such as aluminum foil,

glass or a metal can. Do not dispense unmixed adhesive onto paper or

cloth towels or rags.





                           EXPOSURE LIMITS

INGREDIENT                            VALUE UNIT    TYPE   AUTH   SKIN*

METHACRYLATE                          NONE   NONE   NONE   NONE

ACRYLONITRILE-BUTADIENE-STYRENE

RESIN                                 NONE   NONE   NONE   NONE

DIBUTYL ITACONATE                     NONE   NONE   NONE   NONE

SYNTHETIC RUBBER OLIGOMER             NONE   NONE   NONE   NONE

MICROSPHERES                          NONE   NONE   NONE   NONE

IMPACT MODIFIER                       NONE   NONE   NONE   NONE



* SKIN NOTATION: Listed substances indicated with 'Y' under SKIN refer

to the potential contribution to the overall exposure by the cutaneous

route including mucous membrane and eye, either by airborne or, more

particularly, by direct contact with the substance. Vehicles can alter

skin absorption.



SOURCE OF EXPOSURE LIMIT DATA:

- NONE: None Established





                  SECTION 9. HEALTH HAZARD DATA



EYE CONTACT:

Moderate Eye Irritation: signs/symptoms can include redness, swelling,

pain, tearing, and hazy vision.



SKIN CONTACT:

Allergic Skin Reaction: signs/symptoms can include redness, swelling,

BondPak 7513 Adhesive   Material Safety Data Sheet              11 of 12





                                BondPak 7513 Adhesive part B Page 5 of 6



blistering, and itching. Moderate Skin Irritation: signs/symptoms can

include redness, swelling, itching, and dryness. May be absorbed

through the skin and produce effects similar to those caused by

inhalation and/or ingestion.

WHILE THE FOLLOWING EFFECTS ARE ASSOCIATED WITH ONE OR MORE OF THE

INDIVIDUAL INGREDIENTS IN THIS PRODUCT AND ARE REQUIRED TO BE

INCLUDED ON THE MSDS BY THE U.S. OSHA HAZARD COMMUNICATION STANDARD,

THEY ARE NOT EXPECTED EFFECTS DURING FORESEEABLE USE OF THIS PRODUCT.

Nervous System Effects: signs/symptoms can include emotional changes,

lack of coordination, tremors and sensory loss.



INHALATION:

Irritation (upper respiratory): signs/symptoms can include soreness

of the nose and throat, coughing and sneezing.



WHILE THE FOLLOWING EFFECTS ARE ASSOCIATED WITH ONE OR MORE OF THE

INDIVIDUAL INGREDIENTS IN THIS PRODUCT AND ARE REQUIRED TO BE

INCLUDED ON THE MSDS BY THE U.S. OSHA HAZARD COMMUNICATION STANDARD,

THEY ARE NOT EXPECTED EFFECTS DURING FORESEEABLE USE OF THIS PRODUCT.

Kidney Effects: signs/symptoms can include reduced urine volume,

blood in urine and back pain.

Liver Effects: signs/symptoms can include yellow skin(jaundice) and

tenderness of upper abdomen.

Nervous System Effects: signs/symptoms can include emotional changes,

lack of coordination, tremors and sensory loss.



IF SWALLOWED:

Illness may occur after a single swallowing of relatively large

quantities of this material.

Irritation of Gastrointestinal Tissues: signs/symptoms can include

pain, vomiting, abdominal tenderness, nausea, blood in vomitus, and

blood in feces.





Abbreviations: N/D - Not Determined N/A - Not Applicable CA -

Approximately







The information in this Material Safety Data Sheet (MSDS) is believed

to be correct as of the date issued. BONDPRO CORPORATION MAKES

WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE



OR COURSE OF PERFORMANCE OR USAGE OF TRADE. User is responsible for

determining whether the BondPro Corporation product is fit for a

particular purpose and suitable for user’s methods of use or

application. Given the variety of factors that can affect the use and

application of a BondPro



Corporation product, some of which are uniquely within the user’s

knowledge and control, it is essential that the user evaluate the

BondPro Corporation product to determine whether it is fit for a

particular purpose and suitable for user’s method of use or

application.

BondPak 7513 Adhesive   Material Safety Data Sheet            12 of 12







                                BondPak 7513 Adhesive part B Page 6 of 6



BondPro Corporation provides information in electronic form as a

service to its customers. Due to the remote possibility that

electronic transfer may have resulted in errors, omissions or

alterations in this information, BondPro Corporation makes no

representations as to its completeness or accuracy. In addition,

information obtained from a database may not be as current as the

information in the MSDS available directly from BondPro Corporation.