HENRY COMPANY CANADA INC.
10 St-Pierre, Lachine, Quebec H8R 1N7
Tel.:(514) 364-5224 Fax:(514)364-7270
EMERGENCY TEL. NO.: (514) 364-5224
MATERIAL SAFETY DATA SHEET
WHMIS: D-1B, D-2A, D-2B
I - PRODUCT INFORMATION
Bakor 230-38
PRODUCT NAME
Solvent-base rubber adhesive
PRODUCT TYPE
Adhesive for low density glass insulation to metal
PRODUCT USE
II - HAZARDOUS INGREDIENTS
INGREDIENTS % CAS # EXPOSURE LIMITS LD50/LC50(SPECIES & ROUTE)
Trichloroethylene 15-40 79-01-6 100 ppm STEL LD50 (oral-rat) > 5650 mg/kg
(ACGIH) LD50 (oral-mouse) > 2402 mg/kg
LC50(inhal-mouse)>8450ppm/4hrs
50 ppm TLV-TWA
(ACGIH)
III - PHYSICAL DATA
PHYSICAL [ ] GAS ODOUR & APPEARANCE ODOUR THRESHOLD (ppm)
Blue liquid with chlorinated solvent odour. Not available
STATE [x] LIQUID
[ ] SOLID
VOC
VOLATILE (VOL.) VAPOUR PRESSURE (mm Hg) VAPOUR DENSITY (AIR = 1) EVAPORATION RATE (BuAc=1)
62 - 67% < 1000 g/L 58 at 20掳C 4.54 Approx. 3
BOILING POINT (掳C) FREEZING POINT (掳C) SPEC. GRAVITY (WATER - 1) DENSITY (g / ml)
Approx. 86 掳C Not applicable 1.3 - 1.4 1.3 - 1.4
SOLUBILITY (IN WATER) COEF. OF WATER/OIL DIST. pH
Insoluble Not available Not applicable
IV - FIRE & EXPLOSION HAZARD
FLAMMABILITY [ ] YES CONDITIONS OF FLAMMABILITY
Not applicable.
[ X ] NO
None
FLASH POINT (掳C): FLAMMABLE LIMITS (% VOLUME) AUTO-IGNITION TEMP. (掳C)
---- 8 52 Not available
METHOD: LOWER: UPPER:
TDG CLASS SENSITIVITY TO MECHANICAL IMPACT SENSITIVITY TO STATIC DISCHARGE
Class 6.1 None None
Exposure to flames or fire may cause thermal degradation with evolution of hydrogen chloride,
HAZARDOUS COMBUSTION
phosgene and chlorine.
PRODUCTS
Non-flammable as supplied.
MEANS OF EXTINCTION
Self-contained respiratory equipment when product is exposed to flames or fire as it will emit
SPEC. FIRE FIGHTING PROCEDURES
very toxic fumes on thermal degradation.
V - PREPARATION OF M.S.D.S.
PREPARED BY: PHONE NUMBER DATE
WHMIS Group (514) 364-5224 May 2006
VI - REACTIVITY DATA Bakor 230-38
CHEMICAL [ X ] YES CONDITIONS TO AVOID:
Very high temperatures such as fire, flames, etc. Toxic gas will be evolved.
STABILITY [ ] NO
Alkali metals, strong bases, strong oxidizing agents, strong reducing agents, chemically active metals,
INCOMPATIBILITY
copper, aluminum powder, aluminum chloride, potassium nitrate.
(SUBSTANCE TO AVOID)
Not reactive under normal conditions of use.
CONDITIONS
OF REACTIVITY
If exposed to very high temperatures, thermal decomposition will give off hydrogen chloride, phosgene and
HAZARDOUS DECOMPOS-
chlorine.
ITION PRODUCTS
VII - TOXICOLOGICAL PROPERTIES
LD50 (oral-mouse) > 2402 mg/kg
THRESHOLD LIMIT VALUE LC50/LD50 (estimated)
50 ppm TLV-TWA LC50(inhal-mouse)>8450ppm/4hrs
ROUTE OF ENTRY [X] SKIN CONTACT [ ] SKIN ABS. [x] EYES [x] INGESTION [x] INHALATION
Exposure may cause irritation, lachrymation and burning of the eyes.
EFFECTS OF ACUTE
Irritation of nose and throat. There may be vomiting, nausea, drowsiness, alcoholic-like intoxication, etc.
EXPOSURE
Vapours are primarily a central nervous system depressant.
Prolonged or repeated contact with skin will cause irritation, defatting, dermatitis.
EFFECTS OF
CHRONIC EXPOSURE
After prolonged or frequently
IRRITANCY SENSITIZATION SYNERGISTIC MATERIALS
repeated contacts. Not available Not available
[ ] CARCINOGENICITY [ ] REPRODUCTIVE EFFECTS [ ] TERATOGENICITY [X] MUTAGENICITY
Mutagenicity: Positive results have been obtained in the somatic cells of animals.
Not suspected as a human carcinogen (A5 - ACGIH)
VIII - FIRST AID MEASURES
Wash with soap and water. Get medical attention if irritation or injury occurs.
SKIN
Flush eyes thoroughly with plenty of lukewarm water. Get medical attention
EYES
immediately.
Remove victim to fresh air. Administer artificial respiration if breathing has stopped, administer oxygen.
INHALATION
Consult a physician immediately.
DO NOT INDUCE VOMITING. If vomiting occurs, take care to prevent aspiration into lungs.
INGESTION
Obtain medical attention immediately.
IX - PREVENTIVE MEASURES
Goggles
EYES:
Required solvent resistant type.
PERSONAL GLOVES:
Overalls
PROTECTIVE CLOTHING:
Use approved, organic vapour mask in confined areas or if applied by spray.
EQUIPMENT RESPIRATORY:
Ventilation required in confined areas. Local exhaust, if necessary, to maintain TLV.
ENGINEERING CONTROLS
(VENTILATION, ETC.)
Use proper protective equipment. Provide adequate ventilation. Scrape up to disposal containers, clean
LEAK AND SPILL
with low hazard solvents.
PROCEDURE
If material is spread out to allow evaporation of solvents, residue may be disposed of in sanitary landfill.
WASTE
DO NOT INCINERATE.
DISPOSAL
Keep containers closed when not in use.
HANDLING PROCEDURES
Avoid high temperature.
STORAGE REQUIREMENTS
Keep away from incompatible materials.
1 gal: LTD.QTY. 5 gal: Toxic liquid, Organic, N.O.S. (trichloroethylene), UN2810, Class 6.1, PG III
SHIPPING INFORMATION
Do not ship with food products.
While Henry Company Canada Inc. believes that the data contained herein are factual & opinionsexpressed are those of qualified experts regarding the results of the
tests conducted, the data is not to be taken as warranty or representation for which Henry Company Canada Inc. assumes legal responsibility. These are offered solely
for your consideration, investigation and verification. Any use of this data and information must be determined by the user to be in accordance with federal,
provincial or municipal laws and regulations.
|