|-------------------------------------------------------|
| MATERIAL SAFETY DATA SHEET |
|-------------------------------------------------------|
|=========================================================================|
| SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
|=========================================================================|
PRODUCT NAME : POLYMER QUARTZ COMP. B
IDENTIFICATION NUMBER: PQB000000B PREPARE / REVISED: 08/07/06
PRODUCT USE/CLASS : EPOXY HARDENER
SUPPLIER: MANUFACTURER:
Dudick, Inc. Dudick, Inc.
1818 Miller Parkway 1818 Miller Parkway
Streetsboro, Ohio 44241 Streetsboro, Ohio 44241
CHEM-TEL: 800-255-3924 CHEM-TEL: 800-255-3924
24 HOURS A DAY 24 HOURS A DAY
PREPARER: DUDICK, INC., PHONE: 800-322-1970
|=========================================================================|
| SECTION 2 - COMPOSITION/INFORMATION ON INGREDIENTS |
|=========================================================================|
WT/WT %
ITEM ------------ CHEMICAL NAME ------------- CAS NUMBER LESS THAN
---------------------------------------------------------------------------
01 AMINO POLYAMIDE UNKNOWN 30.0 %
02 BENZYL ALCOHOL 100-51-6 30.0 %
03 ISOPHORONE DIAMINE 2855-13-2 20.0 %
04 XYLENE,MIXED ISOMERS 1330-20-7 15.0 %
05 ETHYLBENZENE 100-41-4 10.0 %
06 2,4,6-TRI(DIMETHYLAMINOMETHYL)PHENOL 90-72-2 5.0 %
07 N-AMINOETHYLPIPERAZINE 140-31-8 5.0 %
08 PARATERTIARYBUTYLPHENOL 98-54-4 5.0 %
---------------------- EXPOSURE LIMITS --------------------
ACGIH OSHA COMPANY
ITEM TLV-TWA TLV-STEL PEL-TWA PEL-CEILING TLV-TWA SKIN
---------------------------------------------------------------------------
01 NO INFO NO INFO NO INFO NO INFO NE YES
02 NO INFO NO INFO NO INFO NO INFO NE NO
03 NE NE NE NE NE YES
04 100PPM 150PPM 100PPM NO INFO NE NO
05 100PPM 125PPM 100PPM 125PPM STEL NE YES
06 NE NE NE NE NE YES
07 NE NE NE NE NE YES
08 NO INFO NO INFO NO INFO NO INFO NO INFO YES
(See Section 16 for abbreviation legend)
(Continued on Page 2)
===========================================================================
Product: PQB000000B PREPARE / REVISED: 08/07/06 Page 2
|=========================================================================|
| SECTION 3 - HAZARDS IDENTIFICATION |
|=========================================================================|
*** EMERGENCY OVERVIEW ***: DANGER!---CAUSES BURNS. WARNING!...FLAMMABLE.
HARMFUL IF SWALLOWED. DO NOT GET IN EYES, ON SKIN, OR CLOTHING. DO NOT
BREATH VAPORS OR MISTS.
EFFECTS OF OVEREXPOSURE - EYE CONTACT: EYE CONTACT MAY CAUSE SEVERE
IRRITATION WITH CORNEAL INJURY. MAY CAUSE BLINDNESS.
EFFECTS OF OVEREXPOSURE - SKIN CONTACT: SEVERE SKIN IRRITANT.
EFFECTS OF OVEREXPOSURE - INHALATION: MAY CAUSE IRRITATION OF THE NOSE,
THROAT, AND LUNGS. THIS PRODUCT CONTAINS XYLENE WHICH AT HIGH VAPOR
CONCENTRATIONS MAY CAUSE HEADACHE,DIZZINESS,ANESTHETIC EFFECTS AND MAY HAVE
CENTRAL NERVOUS SYSTEM EFFECTS. CONCENTRATIONS OF 10,000 PPM OF XYLENE CAN
BE IMMEDIATELY DANGEROUS TO LIFE AND HEALTH. VAPORS AND MISTS MAY BE
CORROSIVE TO THE RESPIRATORY TRACT.
EFFECTS OF OVEREXPOSURE - INGESTION: INGESTION MAY CAUSE BURNS TO THE
MOUTH, THROAT, AND ESOPHAGUS. INGESTION MAY CAUSE NAUSEA,CRAMPS,VOMITING,
AND DIARRHEA.
EFFECTS OF OVEREXPOSURE - CHRONIC HAZARDS: ALLERGIC REACTIONS MAY OCCUR IN
SOME INDIVIDUALS. PREEXISTING SKIN AND EYE DISORDERS MAY BE AGGRAVATED BY
THIS PRODUCT. MAY CAUSE SKIN SENSITIZATION.
PRIMARY ROUTE(S) OF ENTRY: SKIN CONTACT SKIN ABSORPTION INHALATION
INGESTION EYE CONTACT
|=========================================================================|
| SECTION 4 - FIRST AID MEASURES |
|=========================================================================|
FIRST AID - EYE CONTACT: HOLD OPEN EYE LIDS AND FLUSH WITH COPIOUS AMOUNTS
OF FLOWING WATER FOR AT LEAST 15 MINUTES. SEEK MEDICAL ATTENTION.
FIRST AID - SKIN CONTACT: WASH AFFECTED AREAS THOROUGHLY WITH SOAP AND
WATER. REMOVE CONTAMINATED CLOTHING AND WASH THOROUGHLY BEFORE REUSE.
FIRST AID - INHALATION: REMOVE VICTIM TO FRESH AIR. IF VICTIM IS NOT
BREATHING, ARTIFICIAL RESPIRATION SHOULD BE ADMINISTERED BY QUALIFIED
PERSONNEL. SUPPLEMENTAL OXYGEN MAY BE INDICATED. CALL A PHYSICIAN.
FIRST AID - INGESTION: IF SWALLOWED,CALL A PHYSICIAN IMMEDIATELY. NEVER
GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. GIVE VICTIM PLENTY OF
WATER TO DRINK IF CONSCIOUS.
|=========================================================================|
| SECTION 5 - FIRE FIGHTING MEASURES |
|=========================================================================|
FLASH POINT: 106 F LOWER EXPLOSIVE LIMIT: 1.0 %
(SETAFLASH CLOSED CUP) UPPER EXPLOSIVE LIMIT: 7.0 %
AUTOIGNITION TEMPERATURE: NE
(Continued on Page 3)
===========================================================================
Product: PQB000000B PREPARE / REVISED: 08/07/06 Page 3
|=========================================================================|
| SECTION 5 - FIRE FIGHTING MEASURES |
|=========================================================================|
EXTINGUISHING MEDIA: CO2 DRY CHEMICAL FOAM WATER FOG
UNUSUAL FIRE AND EXPLOSION HAZARDS: MAY PRODUCE TOXIC CARBON MONOXIDE AND
NITROGEN OXIDES UPON COMBUSTION.
SPECIAL FIREFIGHTING PROCEDURES: EVACUATE AREA. WATER MAY BE INEFFECTIVE
BUT MAY BE USED TO COOL FIRE EXPOSED CONTAINERS. FIGHT FIRE FROM A SAFE
DISTANCE. WEAR SELF-CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE
CLOTHING.
|=========================================================================|
| SECTION 6 - ACCIDENTAL RELEASE MEASURES |
|=========================================================================|
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: DIKE AREA TO
CONTAIN SPILLAGE. ABSORB EXCESS WITH SAND, EARTH, OR VERMICULITE. SCRAPE
UP AND PLACE IN SUITABLE CONTAINER FOR DISPOSAL. WEAR ALL APPROPRIATE
SAFETY EQUIPMENT WHILE HANDLING SPILLS.
|=========================================================================|
| SECTION 7 - HANDLING AND STORAGE |
|=========================================================================|
HANDLING: IF BODILY CONTACT OCCURS, REMOVE CONTAMINATED CLOTHING AT ONCE.
AVOID CONTACT WITH EYES AND SKIN. AVOID BREATHING VAPORS. FOR INDUSTRIAL
USE ONLY. WEAR APPROPRIATE SAFETY EQUIPMENT WHEN HANDLING.
STORAGE: DO NOT STORE NEAR INCOMPATIBLES. KEEP CONTAINER TIGHTLY CLOSED
WHEN NOT IN USE.
|=========================================================================|
| SECTION 8 - EXPOSURE CONTROLS/PERSONAL PROTECTION |
|=========================================================================|
ENGINEERING CONTROLS: GENERAL MECHANICAL VENTILATION MAY BE SUFFICIENT TO
MINIMIZE VAPOR CONCENTRATIONS. LOCAL EXHAUST MAY BE REQUIRED.
RESPIRATORY PROTECTION: WEAR A PROPERLY FITTED NIOSH/MSHA APPROVED
RESPIRATOR WHEN EXPOSURE TO MISTS OR VAPORS IS LIKELY.
SKIN PROTECTION: IMPERVIOUS RUBBER OR NEOPRENE TYPE. CONSULT GLOVE
MANUFACTURER FOR RECOMMENDATIONS.
EYE PROTECTION: SAFETY GLASSES WITH SIDE SHIELDS RECOMMENDED AS MINIMUM
PROTECTION. GOGGLES RECOMMENDED FOR INDIVIDUALS MIXING THE RESIN AND
CATALYST.
OTHER PROTECTIVE EQUIPMENT: CLEAN, FULL BODY COVERING TO MINIMIZE SKIN
CONTACT WITH MATERIAL. AN EYEWASH STATION AND SAFETY SHOWER IS RECOMMENDED
NEAR WORK AREA.
HYGIENIC PRACTICES: SMOKING OR EATING IN THE WORK AREA SHOULD NOT BE
PERMITTED. WASH THOROUGHLY AFTER HANDLING MATERIAL.
(Continued on Page 4)
===========================================================================
Product: PQB000000B PREPARE / REVISED: 08/07/06 Page 4
|=========================================================================|
| SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES |
|=========================================================================|
BOILING RANGE : 275 - 477 F VAPOR DENSITY : Is heavier than air
ODOR : AMINE AND SOLVENTODOR THRESHOLD : NE
APPEARANCE : VISCOUS LIQUID EVAPORATION RATE: Is slower than Ether
SOLUBILITY IN H2O : NEGLIGIBLE
FREEZE POINT : NE SPECIFIC GRAVITY: 1.07
VAPOR PRESSURE : NE pH @ 0.0 % : NE
PHYSICAL STATE : LIQUID VISCOSITY : 330-430cps
COEFFICIENT OF WATER/OIL DISTRIBUTION: NE
(See Section 16 for abbreviation legend)
|=========================================================================|
| SECTION 10 - STABILITY AND REACTIVITY |
|=========================================================================|
CONDITIONS TO AVOID: HEAT, FLAME, CONTAMINANTS.
INCOMPATIBILITY: STRONG OXIDANTS. STRONG ACIDS.
HAZARDOUS DECOMPOSITION PRODUCTS: OXIDES OF NITROGEN. OXIDES OF CARBON.
OTHER TOXIC ORGANIC SUBSTANCES MAY BE FORMED. AMMONIA WHEN HEATED.
COMBUSTION PRODUCTS MAY INCLUDE NITRILES AND AMIDES.
HAZARDOUS POLYMERIZATION: Will not occur under normal conditions.
STABILITY: This product is stable under normal storage conditions.
|=========================================================================|
| SECTION 11 - TOXICOLOGICAL PROPERTIES |
|=========================================================================|
No product or component toxicological information is available.
|=========================================================================|
| SECTION 12 - ECOLOGICAL INFORMATION |
|=========================================================================|
ECOLOGICAL INFORMATION: DO NOT CONTAMINATE PONDS, STREAMS, OR UNDERGROUND
WATER SUPPLY. ISOPHORONEDIAMINE IS BIODEGRADABLE.
|=========================================================================|
| SECTION 13 - DISPOSAL CONSIDERATIONS |
|=========================================================================|
DISPOSAL METHOD: FOLLOW ALL RELEVANT LOCAL, STATE, AND FEDERAL
REGULATIONS. EMPTY DRUMS MAY CONTAIN RESIDUE OR FUMES WHICH ARE HARMFUL.
THIS PRODUCT EXHIBITS THE CHARACTERISTIC OF IGNITABILITY IF IT BECOMES A
HAZARDOUS WASTE, D001.
|=========================================================================|
| SECTION 14 - TRANSPORTATION INFORMATION |
|=========================================================================|
DOT PROPER SHIPPING NAME: FLAMMABLE LIQUIDS,CORROSIVE N.O.S.
(Continued on Page 5)
===========================================================================
Product: PQB000000B PREPARE / REVISED: 08/07/06 Page 5
|=========================================================================|
| SECTION 14 - TRANSPORTATION INFORMATION |
|=========================================================================|
DOT TECHNICAL NAME: XYLENE,ISOPHORONEDIAMINE
DOT HAZARD CLASS: 3 HAZARD SUBCLASS: 8
DOT UN/NA NUMBER: UN 2924 PACKING GROUP: III RESP. GUIDE PAGE: 132
|=========================================================================|
| SECTION 15 - REGULATORY INFORMATION |
|=========================================================================|
THE FOLLOWING COMPONENTS ARE NOT SUBJECT TO REPORTING IN SECTION 2:
----------- CHEMICAL NAME ----------- CAS NUMBER WT/WT % IS LESS THAN
No non-hazardous components exist
U.S. FEDERAL REGULATIONS: AS FOLLOWS -
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR
1910.1200)
CERCLA - SARA HAZARD CATEGORY:
This product has been reviewed according to the EPA 'Hazard Categories'
promulgated under Sections 311 and 312 of the Superfund Amendment and
Reauthorization Act of 1986 (SARA Title III) and is considered, under
applicable definitions, to meet the following categories:
IMMEDIATE HEALTH HAZARD CHRONIC HEALTH HAZARD FIRE HAZARD
SARA SECTION 313:
This product contains the following substances subject to the reporting
requirements of Section 313 of Title III of the Superfund Amendments and
Reauthorization Act of 1986 and 40 CFR Part 372:
----------- CHEMICAL NAME ----------- CAS NUMBER WT/WT % IS LESS THAN
XYLENE,MIXED ISOMERS 1330-20-7 15.0 %
ETHYLBENZENE 100-41-4 10.0 %
TOXIC SUBSTANCES CONTROL ACT:
The chemical substances in this product are not on the TSCA Section 8
Inventory.
This product contains the following chemical substances subject to the
reporting requirements of TSCA 12(B) if exported from the United States:
----------- CHEMICAL NAME ----------- CAS NUMBER
No information is available.
U.S. STATE REGULATIONS: AS FOLLOWS -
(Continued on Page 6)
===========================================================================
Product: PQB000000B PREPARE / REVISED: 08/07/06 Page 6
|=========================================================================|
| SECTION 15 - REGULATORY INFORMATION |
|=========================================================================|
NEW JERSEY RIGHT-TO-KNOW:
The following materials are non-hazardous, but are among the top five
components in this product:
----------- CHEMICAL NAME ----------- CAS NUMBER
No non-hazardous materials are among the top five ingredients.
PENNSYLVANIA RIGHT-TO-KNOW:
The following non-hazardous ingredients are present in the product at
greater than 3%:
----------- CHEMICAL NAME ----------- CAS NUMBER
No non-hazardous ingredients are present at greater than 3%.
CALIFORNIA PROPOSITION 65:
WARNING: The chemical(s) noted below and contained in this product, are
known to the state of California to cause cancer, birth defects or other
reproductive harm:
----------- CHEMICAL NAME ----------- CAS NUMBER
No Proposition 65 chemicals exist in this product.
INTERNATIONAL REGULATIONS: AS FOLLOWS -
CANADIAN WHMIS: This MSDS has been prepared in compliance with Controlled
Product Regulations except for use of the 16 headings.
CANADIAN WHMIS CLASS: B, E
|=========================================================================|
| SECTION 16 - OTHER INFORMATION |
|=========================================================================|
HMIS RATINGS - HEALTH: 3* FLAMMABILITY: 2 REACTIVITY: 0
VOLATILE ORGANIC COMPOUNDS (VOCS): 1.48 lbs/gal, 178 grams/ltr
LEGEND: N.A. - Not Applicable, N.E. - Not Established,
N.D. - Not Determined
===========================================================================
The information contained on this MSDS has been compiled from information
obtained from raw material suppliers and is believed to be accurate. It is
the responsibility of the user to comply with all Federal, State and Local
Regulations.
===========================================================================
|