Tuesday, March 14, 2006
Page 1 of 4
MSDS - Material Safety Data Sheet
Product Name: Erased Ink #1
MSDS No.: EINK1
I. Basic Information:
Manufacturer: Sirchie Finger Print Laboratories
1
Address: 100 Hunter Place
City, ST Zip: Youngsville, NC 27596
2 1
Emergency Contact: CHEMTREC
COR
Emergency Telephone Number: 800-424-9300
Contact: Tech Support
Information Telephone Number: 919-554-2244
2
1
Last Update: 01-28-2008 Expiration Date:
1
X Liquid Gas Solid
Chemical State:
H
Pure Mixture
Chemical Type: X
II. Ingredients:
Trade Secret
EHS IARC SARA
313 OSHA ACGIH Other
% Range NTP SUB Z PEL TLV Limits
CAS No. Chemical Name
7784136 Aluminum chloride hexahydrate 39.5 5 mg/m3 10 mg/m3 360 F
7681110 Potassium iodide 1 NE NE 680 C
7732185 Water 59 None None 212 F
III. Hazardous Identification:
Hazard Category:
X Acute X Chronic Fire X Pressure X Reactive
Hazardous Identification Information:
May cause severe respiratory and digestive tract irritation with possible burns. Skin irritant. Severe eye irritant.
This material is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
IV. First Aid Measures:
Route(s) of Entry:
Inhalation, ingestion, skin, eyes
Health Hazards (Acute and Chronic):
Acute: Possible eye burns
Signs and Symptoms:
Ingestion: Nausea, vomiting, diarrhea, possible burns
Medical Conditions Generally Aggravated by Exposure:
Skin, eye, respiratory diseases
Tuesday, March 14, 2006
Page 2 of 4
MSDS - Material Safety Data Sheet
Product Name: Erased Ink #1
MSDS No.: EINK1
Emergency and First Aid Procedures:
Inhalation: Remove to fresh air. If breathing becomes difficult, give oxygen (To be administered by qualified medical personnel
only!) If breathing stops, perform artificial respiration. Allow victim to rest. Seek medical attention.
Ingestion: If victim is conscious and alert, give large quantities of water or milk. (Never give anything by mouth to an
unconscious person!) DO NOT induce vomiting. If vomiting occurs, lower the head so that the vomit will not re-enter the mouth
and throat. Seek medical attention.
Skin: Wash with soap and water. Cover the affected area with an emollient. Seek medical attention.
Eyes: Rinse with plenty of water for 15 minutes and immediately seek medical attention. DO NOT use an eye ointment.
Convulsions: Do not restrain the victim, but do remove objects with which they might injure themselves; or, orient the victim to
prevent them from striking fixed heavy objects. If the convulsions cease, turn the victim on their side or face down, so that any
fluid in the mouth can drain.
Other Health Warnings:
V. Fire Fighting Measures:
Flash Point: NE Lower Explosive Limit: NE Upper Explosive Limit: NE
F.P. Method:
Fire Extinguishing Media: Dry chemical, carbon dioxide, chemical foam
Special Fire Fighting Procedures:
Wear self-contained breathing apparatus and protective clothing.
Unusual Fire and Explosion:
Oxidizer--contact with combustible materials may cause a fire.
VI. Accidental Release Measures:
Steps to be Taken in Case Material is Released or Spilled:
Wear vapor respirator, safety goggles, and rubber gloves. Remove sources of ignition (i.e. open flames, sparks). Prevent contact
with combustible material. Stop leak if without risk. Dike if needed. Soak up with inert absorbent material (do not use flammable
substances such as sawdust). Ventilate and wash spill site after collection. Dispose according to local, state, and federal
regulations.
VII. Handling and Storage:
Precautions to be Taken:
Keep in tightly closed container. Keep cool and dry. Avoid ignition sources (heat, open flame, spark). Avoid incompatible
materials, especially water. Use only in well-ventilated areas. Avoid contact with skin, eyes, and clothing. Avoid ingestion and
inhalation. Wash thoroughly after handling.
Other Precautions:
VIII. Exposure Controls/Personal Protection:
Ventilation Requirements:
Use only in well-ventilated areas.
Tuesday, March 14, 2006
Page 3 of 4
MSDS - Material Safety Data Sheet
Product Name: Erased Ink #1
MSDS No.: EINK1
Personal Protective Equipment:
Safety goggles, gloves, vapor respirator, protective clothing
IX. Physical and Chemical Properties:
Boiling Point: 212 F Melting Point: 32 F
Evaporation Rate (Butyl Acetate = 1): NE Vapor Pressure (mm Hg.): 1
Specific Gravity (H20 = 1): 1.00000 Vapor Density (AIR = 1): NE
Solubility In Water: Soluble Appearance and Odor: Yellowish liquid; pungent odor
Other Information:
X. Stability and Reactivity:
Stability:
Stable under normal temperatures and pressures.
Incompatibility (Materials to Avoid):
Combustible material, organic material, metals, water, strong bases, alkaline materials, light, salts, chloral hydrate, calomel,
potassium chlorate, acids, bromine trifluoride, fluorine perchlorate
Decomposition/By Products:
Hydrogen chloride, aluminum oxide, potassium oxides, iodine
Hazardous Polymerization:
Has not been reported.
XI. Toxicological Information:
XII. Ecological Information:
Prevent from entering sewers or waterways. May be toxic to some aquatic life.
XIII. Disposal Considerations:
Dispose according to local, state, and federal regulations.
XIV. Transport Information:
Keep in tightly closed container. Keep cool and dry. Avoid ignition sources (heat, open flame, spark). Avoid incompatible materials,
especially water. Avoid contact with skin, eyes, and clothing. Avoid ingestion and inhalation. Wash thoroughly after handling.
IATA
Shipping name: Chemical kit
Hazard class: 9
UN no.: 3316
Packing group: III
Miscl.
Tuesday, March 14, 2006
Page 4 of 4
MSDS - Material Safety Data Sheet
Product Name: Erased Ink #1
MSDS No.: EINK1
XV. Regulatory Information:
Aluminum chloride hexahydrate is not listed on the TSCA inventory. It is a hydrate and exempt from TSCA inventory requirements
(40 CFR 270.3(u)(2)).
All other ingredients are listed on the TSCA inventory.
This material is subject to the reporting requirements of Section 313 of SARA Title III and 40 CFR Part 373.
XVI. Other Information:
Using this product under normal, properly instructed procedures should not be hazardous.
The information above is believed to be accurate and represents the best information currently available to us. However, we make
no warranty of merchantability or any other warranty, expressed or implied, with respect to such information, and we assume no
liability resulting from its use. Users should make their own investigation to determine the suitability of the information for their
particular purposes.
|